Ricoh KR5 Super-II Seals
$8.25
This custom light seal kit fits the Ricoh KR5 Super II film cameras. The kit includes 2 door channel seals on body, 2 door channel seals on back cover(hinge end), 2 door channel seals on back cover(latch end), 1 hinge seal on camera body and 1 replacement mirror cushion.
Installation help shown below.
In stock
0
People watching this product now!
Description
Ricoh KR5 Super-II Seals | Film Cameras
Custom Light Seal Kits | Ricoh Film Cameras
Ricoh KR5 Super-II Seals | Sears Film Cameras
USCamera | New Used 35mm Ricoh Film Camera Parts
Please contact us for any questions or requests you may have. New light seal kits, parts and also downloads added almost every day.
USCamera Online Since 1998 | Service Manuals | Part Lists | Downloads | Foam | Digital Vintage Film Parts
Ricoh KR5 SuperII Seals
Do you want to make your own light seal kit? Maybe you have an accessory that requires a special size of the light seal material. We can help with that also.
Sometimes sheet foam can be the best solution. Therefore we have USCamera foam sheet in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm available. See here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. Start here.
For help installing light seal kits please. Go here. Following the link to that short read will help improve the quality of your light seal installation. Ricoh KR5 SuperII Seals
Also, USCamera light seal kit placement guides can really help you. Especially if the old light seals have already been removed before you acquired the camera. Look here
USCamera light seal placement guide for this Ricoh light seal. Go here
Premium Ricoh Foam Light Seals | Ricoh KR | Sears KS | Foam Sheet | Pre Cut Strips | USCamera Foam
See all USCamera light seal kits available for Ricoh film cameras.
First of all, the most important task is removing the old seals. Focus on clean, clean, clean. Likewise, clean the old residue from the door channels, and very carefully the mirror cushion area. Certainly, remove the old door hinge and clean anywhere else you are replacing the seals.
The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Lastly, an accurate and careful installation will truly give you thousands of light tight exposures.
Ricoh is innovative continues to find a place with digital imaging. Look here
Ricoh KR5 Super-II Seals
USCamera | Genuine Ricoh Camera, Flash, Lens Parts | Light Seals, Foam Sheets | Service Manual Downloads | Sears Film Cameras | Ricoh KR5 SuperII Seals
Ricoh KR5 Super-II Seals | Premium Quality Open Cell Foam Lasts Years | Also Same High-Quality Japanese Foam As Original | Ricoh Film Cameras | USCamera Foam
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon Pellix Light Seals
USCamera custom light seal kit for the Canon Pellix film camera. This light seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal and a replacement focusing screen seal set of 4 pieces. We find it easier to install the seals surrounding the focusing 1 piece at a time. We also include foam replacements for the 4 felt type seals on the back cover. Though those seals may look in poor condition, most are fine. We only recommend replacing them if missing.
USCamera light seal placement guide for this Canon film camera here
Olympus OM-1 Light Seals
USCamera custom light seal kit for the Olympus models OM 1, OM 1n, OM 2 and OM 2n, OM-3, OM-4, and OM-4T. This seal kit includes 2 door channel seals for the camera body, 1 camera body door hinge seal and a 4 piece mirror cushion set.
Old foam removal and replacement information is always available online.
USCamera light seal placement guide for this Olympus film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Olympus OMG Light Seals
USCamera custom light seal kit for the Olympus OMG OM20 film cameras. This 7-piece seal kit includes lower/upper channel seals for the camera body, 1 camera body hinge seal, 1 mirror cushion, 1 back cover hinge end upper channel seal, and lower/upper seals just under the film cassette spring (latch end, back cover).
USCamera light seal placement guide for this Olympus film camera here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Ricoh KR Light Seals
USCamera custom light seal kit for the Ricoh KR10, KR10 Super, KR10X, XR6, XR7, XR10, XRS, and the Sears KS Super, KSX Super film cameras. This 7 piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on the body, 1 back cover latch plate seal and 1 mirror cushion. Light seal placement guide for this USCamera Ricoh kit.
Ricoh KR-5 Light Seals
USCamera custom light seal kit for the Ricoh KR5, KR5 Super film cameras. This custom 5 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
Light seal placement guide for this USCamera Ricoh kit, go here (coming soon)
Sears KSX Light Seals
USCamera custom light seal kit for the Ricoh Sears KS, KS Auto, KS1, KS Super, KS Super II, KS2, KS1000, KS500, KSX, and KSX Super and other film cameras. This kit may fit other Sears/Ricoh models but we do not have many other Sears model cameras to check for proper fit. This 7-piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on body, 1 back cover latch plate seal and 1 mirror cushion. Tech Note. If your camera has a film reminder window, this kit does not include the light seal around that window.
The USCamera light seal placement guide for this kit is online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Reviews
There are no reviews yet.