Pentax Light Seal Kits

Did you know that USCamera light seals have been installed in tens of thousands of cameras and accessories?

For that reason, you can install USCamera foam light seal products with confidence. Knowing you are installing a proven product. The same high quality as the original manufacturer.

In addition to custom Pentax light seal kits for film cameras, USCamera has thousands of new and used Pentax film camera parts.

We add New light seal kits and parts almost every day.

Top Quality kits using imported open cell foam.

For help installing light seal kits go here.

To see all USCamera light seal kits available for Pentax go here

First of all, the most important and time-consuming work is removing the old seals. Focus on spotlessly clean.

Carefully clean the old residue from the door channels anywhere else you are replacing the seals.

Also, the finest adhesive in the world will not adhere to that gooey residue that was once a quality light seal.

Furthermore, proper installation will give you thousands of light tight exposures

USCamera | Light Seals Kits Foam Sheet | Installation Instructions | Placement Guides | Film Camera Parts | Pentax Light Seals

Showing 1–12 of 17 results

Bamboo Light Seal Tools

$0.47
Many customers have asked additional quantities of the pointed bamboo tools included with our kits.  I find tools like this is invaluable when installing/placing light seals and more. I've used these to hold small parts in place while I installed screws. The bamboo tools are small, light with somewhat polished ends. 2.5mm wide x 150mm long. Package of 10 pieces. See all available USCamera light seal placement guides for film cameras here.

Custom Foam Seals Long

$2.82$3.61
We cut thousands of pieces of foam and try to re-cycle everything we can. However, we just have more long pieces than we will ever use. This is our premium foam, just leftovers. Perfect size to cut for any application requiring long pieces of foam 200mm and under. This is the gray open cell foam we sold for years and has been dis-continued. Limited quantities of all sizes listed. Once they are gone that's all. Close Out packages of this USCamera premium custom cut foam pieces. These packages include multiple long pieces totaling up to 35mm wide(depending on thickness) of our premium INOAC gray foam. Long pieces are at least 8mm wide X 200mm long. Open cell foam made in Japan. Help with removing and installing light seal foam is always available here. Use the option to pick the foam thickness you want.

Custom Foam Seals Short

$2.52$3.51
We cut thousands of pieces of foam and try to re-cycle everything we can. However, we just have more short pieces than we will ever use. This is premium foam, just leftovers. Perfect size to cut for any application requiring short pieces of foam 75-100mm and under. This is the gray open cell foam from Japan. We sold this foam for years until it was dis-continued. Limited quantities of all sizes listed. Once they are gone, that's all. Close Out packaging on this USCamera premium custom foam pieces. These packages include multiple short pieces when combined are at least 50mm wide (45 for 3mmT). Each Short piece is 8-12mm wide X 75-100mm long. Help with removing and installing light seal foam is always available here. Use the option to pick the foam thickness you want.

MX Original Style Mirror Cushion

$5.20$8.40
USCamera made Pentax MX Mirror-Cushion custom cut exactly like the original. Fits all Pentax MX cameras. No Adhesive is applied. Use a contact adhesive like Pliobond or similar.   Use Option to choose package of 5 or 10 cushions.   USCamera mirror cushion placement guide for this Pentax MX mirror cushion set, go here.

Pentax 645 Light Seal

$5.50
USCamera custom light seal kit for the Pentax 645 film insert and case.  This seal kit consists of 2 seals for the channel seals on the film insert and 2 seals for the channel seals on the film insert case.   USCamera light seal placement guide for this Pentax 645 film holder and case here.

Pentax 67 6X7 TTL Prism Finder Foam

$4.00$6.75
USCamera made Pentax custom cut viewfinder seals with adhesive applied for the TTL Penta Prism Viewfinder for the 67 and 6X7 vintage 120/220  format film cameras. Available as 2 piece or 1 piece seal kit. Some customers found the 2 piece kit was easier to install. Use Option to choose 1 or 2 piece viewfinder seal kit.

Pentax 67 Seal Kit

$8.75
USCamera custom light seal kit for the Pentax 67 film cameras. This 8 piece custom seal kit consists of 3  door channel seals on the camera body, 1 back cover hinge seal, 2 back cover door channel seal, 1 camera body door latch seal, and 1 replacement mirror cushion.   USCamera light seal placement guide for this Pentax film camera here.

Pentax K1000 Light Seals

$7.75
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock. Placement guide for this light seal kit, go here.

Pentax K1000 Mirror Cushion

$4.54$8.05
USCamera made Pentax K1000 custom cut mirror cushion with adhesive applied. Fits all Pentax K1000 and Spotmatic series of vintage 35mm film cameras.   Use Option to choose package of 5 or 10 cushions.

Pentax K1000 Pro Pack-10

$34.00
USCamera K1000 Pro Pack-10. This 44 piece light seal package will seal 10 Pentax film cameras like the K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and ES II film cameras. New style K1000 uses 5 screws to retain the bottom cover and the battery cover is plastic. This light seal package includes,
  • 24 lower or upper body channel seals(165mm L)
  • 10 body hinge seals
  • 10 mirror cushions
Light Seal Placement guide for this light seal kit, here. Peeling the foam from the backing can be difficult for some. This video may help.

Pentax K1000 Spotmatic Mirror Cushions

$4.54$8.05
USCamera made Pentax custom cut mirror cushions with adhesive applied. Package of 5 cushions. These mirror cushions fit the New/Old K1000, K1000 SE, Electro Spotmatic, ES, ES II, Spotmatic, Spotmatic 1000, F, SP, and SP IIa vintage Pentax 35mm film cameras.   Use Option to choose package of 5 or 10 cushions.

Pentax ME ME Super Mirror Cushion

$5.10$8.05
USCamera made Pentax custom cut mirror cushion with adhesive applied. This cushion has a special cutout for access to the viewfinder adjustment set screw. Fits Pentax ME, ME-F, ME Super, MG, MV, MV-1, Program A, Program Plus, Super A, and Super Program vintage 35mm film cameras.   Use Option to choose package of 5 or 10 cushions.