Ricoh KR5 Super-II Seals
$8.25
This custom light seal kit fits the Ricoh KR5 Super II film cameras. The kit includes 2 door channel seals on body, 2 door channel seals on back cover(hinge end), 2 door channel seals on back cover(latch end), 1 hinge seal on camera body and 1 replacement mirror cushion.
Installation help shown below.
In stock
0
People watching this product now!
Description
Ricoh KR5 Super-II Seals | Film Cameras
Custom Light Seal Kits | Ricoh Film Cameras
Ricoh KR5 Super-II Seals | Sears Film Cameras
USCamera | New Used 35mm Ricoh Film Camera Parts
Please contact us for any questions or requests you may have. New light seal kits, parts and also downloads added almost every day.
USCamera Online Since 1998 | Service Manuals | Part Lists | Downloads | Foam | Digital Vintage Film Parts
Ricoh KR5 SuperII Seals
Do you want to make your own light seal kit? Maybe you have an accessory that requires a special size of the light seal material. We can help with that also.
Sometimes sheet foam can be the best solution. Therefore we have USCamera foam sheet in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm available. See here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. Start here.
For help installing light seal kits please. Go here. Following the link to that short read will help improve the quality of your light seal installation. Ricoh KR5 SuperII Seals
Also, USCamera light seal kit placement guides can really help you. Especially if the old light seals have already been removed before you acquired the camera. Look here
USCamera light seal placement guide for this Ricoh light seal. Go here
Premium Ricoh Foam Light Seals | Ricoh KR | Sears KS | Foam Sheet | Pre Cut Strips | USCamera Foam
See all USCamera light seal kits available for Ricoh film cameras.
First of all, the most important task is removing the old seals. Focus on clean, clean, clean. Likewise, clean the old residue from the door channels, and very carefully the mirror cushion area. Certainly, remove the old door hinge and clean anywhere else you are replacing the seals.
The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Lastly, an accurate and careful installation will truly give you thousands of light tight exposures.
Ricoh is innovative continues to find a place with digital imaging. Look here
Ricoh KR5 Super-II Seals
USCamera | Genuine Ricoh Camera, Flash, Lens Parts | Light Seals, Foam Sheets | Service Manual Downloads | Sears Film Cameras | Ricoh KR5 SuperII Seals
Ricoh KR5 Super-II Seals | Premium Quality Open Cell Foam Lasts Years | Also Same High-Quality Japanese Foam As Original | Ricoh Film Cameras | USCamera Foam
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon Pellix Light Seals
USCamera custom light seal kit for the Canon Pellix film camera. This light seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal and a replacement focusing screen seal set of 4 pieces. We find it easier to install the seals surrounding the focusing 1 piece at a time. We also include foam replacements for the 4 felt type seals on the back cover. Though those seals may look in poor condition, most are fine. We only recommend replacing them if missing.
USCamera light seal placement guide for this Canon film camera here
Olympus ECR Light Seals
USCamera custom light seal kit for the Olympus 35 ECR rangefinder film cameras. This seal kit includes 2 door channel seals for the camera body, 2 back cover channel seals, and 1 door hinge seal on the camera body.
Light seal installation, and removal help is always available.
Peeling the foam from the backing can be difficult for some. This video may help
USCamera custom light seal placement for this Olympus film camera here
Pentax K1000 Light Seals
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock.
Help with removal, and replacement of foam seals is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Light Seal Placement guide for this light seal kit, go here.
Ricoh KR-5 Light Seals
USCamera custom light seal kit for the Ricoh KR5, KR5 Super film cameras. This custom 5 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
Light seal placement guide for this USCamera Ricoh kit, go here (coming soon)
Yashica FX-1 Light Seals
USCamera 7 piece custom light seal kit for the Yashica FX-1 and FX-2 film cameras. This kit includes 2 door channel seals for the camera body, 1 camera body hinge seal, 1 latch plate seal on the back cover, 2 small back cover hinge side back cover channel seals and 1 custom cut mirror cushion like the original.
USCamera light seal placement guide for this model Yashica film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica TL Electro-X Seals
USCamera custom light seal kit for the Yashica TL Electro X Series of film cameras. This 6 piece custom kit includes lower/upper door channel seals on the camera body, short lower/upper channel seals starting at back cover hinge end, 1 special cut mirror cushion, and 1 door hinge seal on the camera body.
Old foam removal and replacement information is always available online.
USCamera light seal placement guide for this Yashica film camera.
Removing the backing from the foam can be difficult for some. This video may help.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Reviews
There are no reviews yet.