Ricoh KR5 Super-II Seals
$8.25
This custom light seal kit fits the Ricoh KR5 Super II film cameras. The kit includes 2 door channel seals on body, 2 door channel seals on back cover(hinge end), 2 door channel seals on back cover(latch end), 1 hinge seal on camera body and 1 replacement mirror cushion.
Installation help shown below.
In stock
0
People watching this product now!
Description
Ricoh KR5 Super-II Seals | Film Cameras
Custom Light Seal Kits | Ricoh Film Cameras
Ricoh KR5 Super-II Seals | Sears Film Cameras
USCamera | New Used 35mm Ricoh Film Camera Parts
Please contact us for any questions or requests you may have. New light seal kits, parts and also downloads added almost every day.
USCamera Online Since 1998 | Service Manuals | Part Lists | Downloads | Foam | Digital Vintage Film Parts
Ricoh KR5 SuperII Seals
Do you want to make your own light seal kit? Maybe you have an accessory that requires a special size of the light seal material. We can help with that also.
Sometimes sheet foam can be the best solution. Therefore we have USCamera foam sheet in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm available. See here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. Start here.
For help installing light seal kits please. Go here. Following the link to that short read will help improve the quality of your light seal installation. Ricoh KR5 SuperII Seals
Also, USCamera light seal kit placement guides can really help you. Especially if the old light seals have already been removed before you acquired the camera. Look here
USCamera light seal placement guide for this Ricoh light seal. Go here
Premium Ricoh Foam Light Seals | Ricoh KR | Sears KS | Foam Sheet | Pre Cut Strips | USCamera Foam
See all USCamera light seal kits available for Ricoh film cameras.
First of all, the most important task is removing the old seals. Focus on clean, clean, clean. Likewise, clean the old residue from the door channels, and very carefully the mirror cushion area. Certainly, remove the old door hinge and clean anywhere else you are replacing the seals.
The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Lastly, an accurate and careful installation will truly give you thousands of light tight exposures.
Ricoh is innovative continues to find a place with digital imaging. Look here
Ricoh KR5 Super-II Seals
USCamera | Genuine Ricoh Camera, Flash, Lens Parts | Light Seals, Foam Sheets | Service Manual Downloads | Sears Film Cameras | Ricoh KR5 SuperII Seals
Ricoh KR5 Super-II Seals | Premium Quality Open Cell Foam Lasts Years | Also Same High-Quality Japanese Foam As Original | Ricoh Film Cameras | USCamera Foam
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Olympus ECR Light Seals
USCamera custom light seal kit for the Olympus 35 ECR rangefinder film cameras. This seal kit includes 2 door channel seals for the camera body, 2 back cover channel seals, and 1 door hinge seal on the camera body.
Light seal installation, and removal help is always available.
Peeling the foam from the backing can be difficult for some. This video may help
USCamera custom light seal placement for this Olympus film camera here
Pentax K1000 Light Seals
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock.
Help with removal, and replacement of foam seals is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Light Seal Placement guide for this light seal kit, go here.
Sears KSX Light Seals
USCamera custom light seal kit for the Ricoh Sears KS, KS Auto, KS1, KS Super, KS Super II, KS2, KS1000, KS500, KSX, and KSX Super and other film cameras. This kit may fit other Sears/Ricoh models but we do not have many other Sears model cameras to check for proper fit. This 7-piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on body, 1 back cover latch plate seal and 1 mirror cushion. Tech Note. If your camera has a film reminder window, this kit does not include the light seal around that window.
The USCamera light seal placement guide for this kit is online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar V3000s Light Seals
USCamera 6 piece custom light seal kit for the Vivitar V3000s, and V3800Â film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door latch seal back cover, 1 upper door channel seal back cover and 1 door hinge seal on the back cover.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar XC3-XC4 Light Seals
 USCamera custom light seal kit for the Vivitar XC-1, XC-2, XC-3, and the XC-4 film cameras. This 6 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals latch end, back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for XC series Vivitar film cameras.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FR Light Seals
USCamera custom light seal kit for the Yashica FR FR1 FRII film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
USCamera custom light seal placement guide for this Yashica film camera, here
Reviews
There are no reviews yet.