Light Seal Placement Guides

Pentax 67 6×7 Light Seal Placement Guide

Pentax 67 6×7 Light Seal Placement Guide

Before doing anything, please go here.
Pentax 67 6×7 Light Seal Placement Guide
For more information on purchasing this kit, go here.

This 8 piece light seal kit for Pentax 6×7 cameras includes,

top channel seal, camera body, from the hinge to the counter opening – 1 x 1mm
top channel seal, camera body, from the counter opening to the latch side – 1 x 1mm
bottom channel seal, camera body – 1 x 1mm
mirror cushion – 1 x 3mm
hinge seal on the camera body (not foam, doesn’t usually need replacement) 1 x 1mm
hinge seal on the back cover 1 x 1mm
top/bottom, door channel seal, back cover, hinge end – 2 x 1mm

USCamera Since 1998 | Pro Light Seal Installation Available | Light Seal Kits | Vintage Film Cameras

Lastly, always made to inspire…see New film camera products.

author-avatar

About Gray

As a US Army veteran attending National Camera's resident camera repair school in 1979, is where I found my true calling for the demanding yet extremely interesting field of photo equipment service and sales. For 25 years we grew every year. The staff and I serviced tens of thousands of film camera items, trained many technicians, met thousands of wonderful customers and truly had a fantastic time. Around 2004, my film camera service experience was devalued somewhat by the internet, and digital camera sales. Needles to say film camera sales/service flat-lined. Camera stores 50 times larger than mine were closing. I could see a new opportunity on the Internet. USCamera started as information site then became a family run internet business. Our mission remains the same, • Specialize in Vintage film equipment, mostly after 1958 • Knowledgeable • Provide quality products • Superior Service • Always available via phone - contact form – email All of us at USCamera look forward to serving you. Gray USCamera.com

2 thoughts on “Pentax 67 6×7 Light Seal Placement Guide

  1. José María Castelao Cámara says:

    Hello,
    I just purchased through ebay your light replacement kit for Pentax 67.
    I am a new user of this camera–. Sorry for my ignorance, but I am a little puzzled looking at the small square foam pad that goes in the mirror…
    The camera has a huge mirror…Is this little pad the only foam that this part needs?
    In other words, does this kit contains EVERYTHING regarding the replacement of all the seals of this model?

    Thankyou for answering this

    1. Michael says:

      Hello Jose,
      Thanks for contacting me.
      Yes, the 1 small mirror cushion is the only one used on the Pentax 67 and 67II.
      It is 11mm L and 5.5 exactly like the original.
      Kindly,
      Gray

Leave a Reply

Your email address will not be published. Required fields are marked *