Ricoh KR5 Super-II Seals
$8.25
This custom light seal kit fits the Ricoh KR5 Super II film cameras. The kit includes 2 door channel seals on body, 2 door channel seals on back cover(hinge end), 2 door channel seals on back cover(latch end), 1 hinge seal on camera body and 1 replacement mirror cushion.
Installation help shown below.
In stock
0
People watching this product now!
Description
Ricoh KR5 Super-II Seals | Film Cameras
Custom Light Seal Kits | Ricoh Film Cameras
Ricoh KR5 Super-II Seals | Sears Film Cameras
USCamera | New Used 35mm Ricoh Film Camera Parts
Please contact us for any questions or requests you may have. New light seal kits, parts and also downloads added almost every day.
USCamera Online Since 1998 | Service Manuals | Part Lists | Downloads | Foam | Digital Vintage Film Parts
Ricoh KR5 SuperII Seals
Do you want to make your own light seal kit? Maybe you have an accessory that requires a special size of the light seal material. We can help with that also.
Sometimes sheet foam can be the best solution. Therefore we have USCamera foam sheet in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm available. See here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. Start here.
For help installing light seal kits please. Go here. Following the link to that short read will help improve the quality of your light seal installation. Ricoh KR5 SuperII Seals
Also, USCamera light seal kit placement guides can really help you. Especially if the old light seals have already been removed before you acquired the camera. Look here
USCamera light seal placement guide for this Ricoh light seal. Go here
Premium Ricoh Foam Light Seals | Ricoh KR | Sears KS | Foam Sheet | Pre Cut Strips | USCamera Foam
See all USCamera light seal kits available for Ricoh film cameras.
First of all, the most important task is removing the old seals. Focus on clean, clean, clean. Likewise, clean the old residue from the door channels, and very carefully the mirror cushion area. Certainly, remove the old door hinge and clean anywhere else you are replacing the seals.
The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Lastly, an accurate and careful installation will truly give you thousands of light tight exposures.
Ricoh is innovative continues to find a place with digital imaging. Look here
Ricoh KR5 Super-II Seals
USCamera | Genuine Ricoh Camera, Flash, Lens Parts | Light Seals, Foam Sheets | Service Manual Downloads | Sears Film Cameras | Ricoh KR5 SuperII Seals
Ricoh KR5 Super-II Seals | Premium Quality Open Cell Foam Lasts Years | Also Same High-Quality Japanese Foam As Original | Ricoh Film Cameras | USCamera Foam
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Olympus ECR Light Seals
USCamera custom light seal kit for the Olympus 35 ECR rangefinder film cameras. This seal kit includes 2 door channel seals for the camera body, 2 back cover channel seals, and 1 door hinge seal on the camera body.
Light seal installation, and removal help is always available.
Peeling the foam from the backing can be difficult for some. This video may help
USCamera custom light seal placement for this Olympus film camera here
Olympus OMG Light Seals
USCamera custom light seal kit for the Olympus OMG OM20 film cameras. This 7-piece seal kit includes lower/upper channel seals for the camera body, 1 camera body hinge seal, 1 mirror cushion, 1 back cover hinge end upper channel seal, and lower/upper seals just under the film cassette spring (latch end, back cover).
USCamera light seal placement guide for this Olympus film camera here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described. If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit.
USCamera light seal placement guide for the Pentax MX mirror cushion kit.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Ricoh KR Light Seals
USCamera custom light seal kit for the Ricoh KR10, KR10 Super, KR10X, XR6, XR7, XR10, XRS, and the Sears KS Super, KSX Super film cameras. This 7 piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on the body, 1 back cover latch plate seal and 1 mirror cushion. Light seal placement guide for this USCamera Ricoh kit.
Ricoh KR-5 Light Seals
USCamera custom light seal kit for the Ricoh KR5, KR5 Super film cameras. This custom 5 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
Light seal placement guide for this USCamera Ricoh kit, go here (coming soon)
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar XC3-XC4 Light Seals
 USCamera custom light seal kit for the Vivitar XC-1, XC-2, XC-3, and the XC-4 film cameras. This 6 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals latch end, back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for XC series Vivitar film cameras.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-D Quartz Light Seals
USCamera 6 piece custom light seal kit for the Yashica FX-D Quartz film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 back cover latch plate seal, and 1 mirror cushion.
USCamera light seal placement guide for this model Yashica film camera here.
Reviews
There are no reviews yet.