Ricoh KR5 Super-II Seals
$8.25
This custom light seal kit fits the Ricoh KR5 Super II film cameras. The kit includes 2 door channel seals on body, 2 door channel seals on back cover(hinge end), 2 door channel seals on back cover(latch end), 1 hinge seal on camera body and 1 replacement mirror cushion.
Installation help shown below.
In stock
0
People watching this product now!
Description
Ricoh KR5 Super-II Seals | Film Cameras
Custom Light Seal Kits | Ricoh Film Cameras
Ricoh KR5 Super-II Seals | Sears Film Cameras
USCamera | New Used 35mm Ricoh Film Camera Parts
Please contact us for any questions or requests you may have. New light seal kits, parts and also downloads added almost every day.
USCamera Online Since 1998 | Service Manuals | Part Lists | Downloads | Foam | Digital Vintage Film Parts
Ricoh KR5 SuperII Seals
Do you want to make your own light seal kit? Maybe you have an accessory that requires a special size of the light seal material. We can help with that also.
Sometimes sheet foam can be the best solution. Therefore we have USCamera foam sheet in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm available. See here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. Start here.
For help installing light seal kits please. Go here. Following the link to that short read will help improve the quality of your light seal installation. Ricoh KR5 SuperII Seals
Also, USCamera light seal kit placement guides can really help you. Especially if the old light seals have already been removed before you acquired the camera. Look here
USCamera light seal placement guide for this Ricoh light seal. Go here
Premium Ricoh Foam Light Seals | Ricoh KR | Sears KS | Foam Sheet | Pre Cut Strips | USCamera Foam
See all USCamera light seal kits available for Ricoh film cameras.
First of all, the most important task is removing the old seals. Focus on clean, clean, clean. Likewise, clean the old residue from the door channels, and very carefully the mirror cushion area. Certainly, remove the old door hinge and clean anywhere else you are replacing the seals.
The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Lastly, an accurate and careful installation will truly give you thousands of light tight exposures.
Ricoh is innovative continues to find a place with digital imaging. Look here
Ricoh KR5 Super-II Seals
USCamera | Genuine Ricoh Camera, Flash, Lens Parts | Light Seals, Foam Sheets | Service Manual Downloads | Sears Film Cameras | Ricoh KR5 SuperII Seals
Ricoh KR5 Super-II Seals | Premium Quality Open Cell Foam Lasts Years | Also Same High-Quality Japanese Foam As Original | Ricoh Film Cameras | USCamera Foam
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon EF Light Seals
USCamera custom light seal kit for the Canon EF Auto film cameras. The kit includes 2 door channel seals for the camera body, 1 door hinge seal and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the backing and press into place. Top Quality kit using imported open cell foam Made in Japan.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Olympus OMG Light Seals
USCamera custom light seal kit for the Olympus OMG OM20 film cameras. This 7-piece seal kit includes lower/upper channel seals for the camera body, 1 camera body hinge seal, 1 mirror cushion, 1 back cover hinge end upper channel seal, and lower/upper seals just under the film cassette spring (latch end, back cover).
USCamera light seal placement guide for this Olympus film camera here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax 67 Seal Kit
USCamera custom light seal kit for the Pentax 67 film cameras. This 8 piece custom seal kit consists of 3 door channel seals on the camera body, 1 back cover hinge seal, 2 back cover door channel seal, 1 camera body door latch seal, and 1 replacement mirror cushion. USCamera light seal placement guide for this Pentax film camera here.
Pentax K1000 Light Seals
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock.
Help with removal, and replacement of foam seals is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Light Seal Placement guide for this light seal kit, go here.
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described. If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit.
USCamera light seal placement guide for the Pentax MX mirror cushion kit.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax Super Program Light Seals
USCamera custom light seal kit for the Pentax Super Program, Super A, Program Plus, Program A film cameras. The body casting for these models is the same. This 5 piece kit includes 2 door channels seals for the camera body, special cut mirror cushion, back cover hinge end top channel seal, and the hinge seal on the camera body. The original hinge seal is made of type of material that does not require replacement. I do not recommend removing the original seal and. In response to many requests from customers who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. All seals have the adhesive installed. Just remove the backing from the foam and install. This kit is custom cut by USCamera and uses adhesive backed black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax light seal go here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Ricoh KR-5 Light Seals
USCamera custom light seal kit for the Ricoh KR5, KR5 Super film cameras. This custom 5 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
Light seal placement guide for this USCamera Ricoh kit, go here (coming soon)
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Reviews
There are no reviews yet.