Yashica FX Custom Mirror Cushion
$5.00
USCamera custom cut mirror cushion, just like the original, for the Yashica FX-1, and FX-2 film cameras. Package of 3 mirror cushions.
USCamera light seal placement guide for this model Yashica film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
In stock
0
People watching this product now!
Description
Yashica FX Custom Mirror Cushion | FX-2 | FX-2
USCamera | Yashica Light Seal Kits | Foam Sheets | Custom Kits | Over 250 Custom Cut Foam Products | Owner – Parts – Service – User Manual Downloads
Yashica FX Custom Mirror Cushion | FX-2 | Our Light Seals Kits Start with Imported Foam From Japan
New-Used Vintage Film Camera Parts
USCamera Free Monthly Download | Every Month | Always Free
New light seal kits, also downloads, and spare parts are added almost every day.
Please contact us with any questions or requests you may have.
Do you want to make your own light seal kit?
Maybe you have an item that needs a certain size of light seal foam. We can help with that also.
Many times sheet foam can be best. We stock USCamera foam sheet in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm.
We have many strips of light seal foam already cut to width and 220 mm long.
For help with installing and removing light seals. Following the link to that short read will help improve the quality of your install.
USCamera Online Since 1998
Genuine Parts | Service Manuals | Part Lists | Light Seal Kits | Foam Sheet | Vintage Parts | Cameras | Flash |Lenses
USCamera light seal kit placement guides can help you in placing the new seals. More so if the old light seals have been removed.
We also make light seal kits for over 100 film cameras. Shop all USCamera light seal kits for Yashica.
USCamera Since 1998 | Premium Quality Foam Light Seals | Kits | Foam Sheets | Pre-Cut Strips | USCamera Foam | Yashica FX Custom Mirror Cushion | FX-2
The most important task is cleaning off the old seals. Focus on clean, clean, clean.
Our light seal kit placement guides can really help you also. Especially if the old light seals have already been removed before you acquired the camera.
Likewise, remove the old foam from the door channels, and very, very carefully the mirror cushion area.
Also, remove the old door hinge and clean anywhere else you are replacing the seals.
The finest adhesive in the world will not adhere to that sticky, gooey goo that was once a foam light seal.
Yashica FX Custom Mirror Cushion | FX-2
An accurate and careful installation will give you thousands of light tight exposures.
Lastly, always made to inspire…see New film camera products.
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Pentax K1000 Light Seals
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock.
Help with removal, and replacement of foam seals is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Light Seal Placement guide for this light seal kit, go here.
Ricoh KR Light Seals
USCamera custom light seal kit for the Ricoh KR10, KR10 Super, KR10X, XR6, XR7, XR10, XRS, and the Sears KS Super, KSX Super film cameras. This 7 piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on the body, 1 back cover latch plate seal and 1 mirror cushion. Light seal placement guide for this USCamera Ricoh kit.
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-D Quartz Light Seals
USCamera 6 piece custom light seal kit for the Yashica FX-D Quartz film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 back cover latch plate seal, and 1 mirror cushion.
USCamera light seal placement guide for this model Yashica film camera here.
Yashica TL Electro-X Seals
USCamera custom light seal kit for the Yashica TL Electro X Series of film cameras. This 6 piece custom kit includes lower/upper door channel seals on the camera body, short lower/upper channel seals starting at back cover hinge end, 1 special cut mirror cushion, and 1 door hinge seal on the camera body.
Old foam removal and replacement information is always available online.
USCamera light seal placement guide for this Yashica film camera.
Removing the backing from the foam can be difficult for some. This video may help.
Reviews
There are no reviews yet.