Mamiya M645 Mirror Cushion
$6.00
USCamera custom mirror cushion and frame seal kit for the Mamiya M645, M645 1000s, and the M645 J. This M645 mirror cushion kit includes 1 left seal cushion, 1 right seal cushion and front damper cushion on the bottom of the viewfinder front frame.
USCamera light seal placement guide for this Mamiya foam seal kit, go here.
In stock
0
People watching this product now!
Description
Mamiya M645 Mirror Cushion
USCamera | Custom Light Seals Mamiya | Mamiya M645 M645J M645 1000S Film Cameras
Mamiya M645 Mirror Cushion | USCamera Foam | Mamiya Film Cameras Light Seals
New/Used Mamiya Film Camera Parts
This Mamiya light seal kit fits all M Series 645 bodies including M645 M645J M645 1000 M645 1000S. The 645 kit includes the seals for the back cover and camera body. If you also need the mirror cushion seals, we make a kit of perfectly cut pieces, in stock here.
Please Contact us for any questions you may have. Also, new downloads, parts, and light seal kits and parts are added almost every day.
All USCamera Light seal kits available for Mamiya
Mamiya M645 Mirror Cushion
USCamera Light Seals | Premium Open Cell Foam
Do you want to make your own light seal kit? Maybe you also have a Mamiya accessory that requires a special size of the light seal material. We can help with that too.
Sometimes sheet foam is the best solution. We have our USCamera sheet foam in 1mm, 1.5mm, 2mm, 3mm, and 4mm thickness available. Go here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. Start here. Mamiya M645 Mirror Cushion
For help installing light seal kits, please, Start here. Also, following the link to a short read can improve the quality of your light seal installation.
USCamera light seal kit placement guides can really help you also. Especially if the old light seals have already been removed before you acquired the camera. Start here
USCamera light seal placement guide for the M645 series Mamiya film cameras, Go here.
Currently making light seal kits for over 90 popular film cameras. See all USCamera light seal kits available for Mamiya
M645 | M645J | M645 1000S | 645 Format Film Cameras | Mamiya M645 Mirror Cushion
First of all, the most important work you have to do is to remove the old seals. Focus on clean, clean, clean. Also, carefully clean the old residue from the door channels, mirror cushion area, door hinge area and anywhere else you are replacing the seals. Furthermore, the finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Finally, proper installation will give you thousands of light tight exposures.
Film cameras may be in the past, for now, however, Mamiya Leaf is still going strong. Look here.
USCamera | Genuine Mamiya Film Camera + Lens Parts | Light Seals, Foam Sheets | Also Service Manual Downloads | Mamiya M645 Mirror Cushion
Mamiya M645 Mirror Cushion | Premium Quality Open Cell Foam Lasts Years. Also Same High-Quality Japanese Foam As Original | Mamiya Film Cameras | USCamera Foam
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon EF Light Seals
USCamera custom light seal kit for the Canon EF Auto film cameras. The kit includes 2 door channel seals for the camera body, 1 door hinge seal and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the backing and press into place. Top Quality kit using imported open cell foam Made in Japan.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Olympus ECR Light Seals
USCamera custom light seal kit for the Olympus 35 ECR rangefinder film cameras. This seal kit includes 2 door channel seals for the camera body, 2 back cover channel seals, and 1 door hinge seal on the camera body.
Light seal installation, and removal help is always available.
Peeling the foam from the backing can be difficult for some. This video may help
USCamera custom light seal placement for this Olympus film camera here
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described. If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit.
USCamera light seal placement guide for the Pentax MX mirror cushion kit.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica Electro-35 Light Seals
USCamera 6 piece custom light seal kit for the Yashica Electro 35 Series including the G, GS, GT, GSN, and GTN. This seal kit includes 2 door channel seals on the body, back cover door latch seal, 2 short channel seals on back cover latch end and 1 hinge seal on the back cover.
USCamera light seal placement guide for this Yashica film camera, here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica TL Electro-X Seals
USCamera custom light seal kit for the Yashica TL Electro X Series of film cameras. This 6 piece custom kit includes lower/upper door channel seals on the camera body, short lower/upper channel seals starting at back cover hinge end, 1 special cut mirror cushion, and 1 door hinge seal on the camera body.
Old foam removal and replacement information is always available online.
USCamera light seal placement guide for this Yashica film camera.
Removing the backing from the foam can be difficult for some. This video may help.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Reviews
There are no reviews yet.