Mamiya RB Back Insert Seals
USCamera custom 6 piece light seal kit for the Mamiya RB 67 Pro / Pro S 120, 220 and 645 film-back inserts only. This 1/2 of what I recommend you replace. The other 1/2 is the shell kit
The RB film back consists of the shell and insert. In checking film backs for years, if the shell seals are bad so are the insert seals, for that reason, I recommend replacing them as a set. You may purchase the complete film back kit here.
The insert kit includes door channel seals on the back of the top and bottom covers, top/bottom seals left guide roller plate and top/bottom seals right guide roller plate.
Make sure to check out the placement guide for the RB Pro and Pro S film back insert, and shell here.
Mamiya RB Back Shell Seals
This USCamera custom seal kit will service one RB 67, RB 67 Pro, Pro S 120, 220, and 645 film back shell. This 1/2 of what I recommend you replace. The other 1/2 is the insert kit
The RB film back consists of the shell and insert. In checking film backs for years, if the shell seals are bad so are the insert seals. I recommend replacing them as a set. You may purchase the complete film back kit here.
This is the shell kit only and includes 2 door channel seals on the back cover, 1 back cover hinge seal and 1 back cover door latch seal.
USCamera RB 67 film back placement guide will help with installing the shell kits. Look here
Mamiya Light-Seals Super 23
USCamera custom light seal kit for Mamiya Press or Super 23 6x9, 6x7, and 645 film backs. Â This is the replacement seal kit that includes 2 door channels seals on the door, 2 front plate seals where the back attaches to the camera(supplied in 2 pieces for ease of installation), the door hinge seal, and the door latch plate seal.
USCamera light seal placement guide for this Mamiya film back here.
Mamiya M645 Mirror Cushion
USCamera custom mirror cushion and frame seal kit for the Mamiya M645, M645 1000s, and the M645 J. This M645 mirror cushion kit includes 1 left seal cushion, 1 right seal cushion and front damper cushion on the bottom of the viewfinder front frame.
USCamera light seal placement guide for this Mamiya foam seal kit, go here.
Minolta SRT Light Seals
USCamera custom light seal kit for the Minolta SR and SRT Series film cameras. Including the SRM, SR505, SR505s, SR101, SR101s, SR-T 100, 100X, 101, 101b, 102 , 103, 200, 201, 202, 303b, SC, SC-II, MC, MC II and SR-T Super. There may be more models. This seal kit consists of 2 door channel seals on the camera body, hinge seal, mirror cushion and the mirror baffle cushion. Please note that the door hinge seal is made of a felt type material and does not need to be replaced, though is included in the kit.
USCamera light seal placement guide for this Minolta film camera here
Mamiya M645 Light Seals
USCamera custom light seal kit for the Mamiya M645 series of medium format SLR cameras. This includes the M645, M645J, M645 1000, and the M645 1000S. This 11-piece light seal kit is made of 2 kits. First, is the back cover kit includes 1 upper channel seal, 1 lower channel seal, and the left/right channel seals on the back cover. 2nd would be the camera body kit and includes 1 door hinge seal, 1 upper channel latch plate seal, 1 left channel seal, 1 seal above the counter lever opening, and 1 short seal below the same lever. Then the overlay latch plate seal which placed over the 1st latch plate seal. With the exception of the overlay latch plate seal, all other seals have adhesive already applied. To install, just peel off the backing and press it into place. Top Quality kit using imported open cell foam. If you need the mirror cushion seal set, we also make a kit of perfectly cut pieces, in stock here. Please note. The image in this ad for the camera body seals shows the top overlay latch plate seal is shaped like a "C". That is actually a straight foam seal. It can easily fit any shape since it is soft foam. However, to get that photo of it shaped like "C", I used some clear wax you can't see in the image, to hold that shape for the picture.
USCamera light seal placement guide for this Mamiya film camera, Go here.
Removing and replacing light seal can be a challenge, our instructions can help you.
Mamiya C-Series Light Seals
USCamera custom back cover light seal kit for the most Mamiya C-Series TLR Camera Bodies including the C2, C22, C220, C220f C3, C33, C330, C330f, and the Mamiya Flex C. This kit includes the door hinge seal on the back cover and the top/left / right door seal on the back cover. The light seals have the adhesive already applied and to install you just peel off the backing and press into place. Top Quality seals made of imported open cell foam. Tech note: When installing this kit on the MamiyaFlex, you may need to cut the length of upper and lower channel seals. It appears from the cameras we have, the Mamiya flex door is a slightly smaller than the newer model Mamiya TLRs. Need the C330-S kit?
USCamera light seal placement guide for this Mamiya go here.
Helpful advice on light seal remove and replace is always available.
Peeling the foam from the backing can be difficult for some. This video may help.
Mamiya Light Seals 1000DTL
This USCamera custom light seal kit fits the Mamiya 1000 / 500 / DTL / TL film cameras. This light seal kit includes 2 door channel seals on the camera body, 2 door channels seals on the back cover, 1 door hinge seal on the back cover, 1 replacement mirror cushion and 1 door latch seal on the camera body.
USCamera light seal placement guide for this Mamiya film camera, Go here
Minolta XG Light Seals
USCamera custom-made light seal kit for the Minolta XG Series film cameras both new and old-style including XG1, XG7, XG9, XGM, XG-A, XG SE, and more. New style cameras have the "world" logo in the letter "O" on the top cover's front nameplate. This light seal kit includes 2 door channel seals for the camera body, 1 mirror cushion, and 1 door hinge seal on the back cover. The "N" model update and addition to the old style XG's are the 2 small seals by the door hinge seal on the back cover.
Light Seal Placement guide for this Minolta light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Minolta XD Light Seals
USCamera custom made Light Seal Kit for the Minolta XD, XD-5, XD-7 and the XD11. This light seal kit consists of 2 door channel seals for the camera body, 1 mirror cushion, 1 door hinge seal on the back cover and 2 small seals by the door hinge seal on the back cover.
USCamera light seal placement guide for the Minolta XD series film camera.
Minolta XE Light Seals
USCamera custom made light seal kit for the Minolta XE series film cameras. This seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 mirror cushion and 1 door hinge seal on the back cover.
USCamera placement guide for this Minolta light seal kit, here.
Minolta X700 Light Seals
USCamera custom light seal kit for the Minolta X300, X300x, X370, X370n, X370s, X370, X500, X570, X600, X7, X7a, X700, and X9 film cameras. This light seal kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door hinge seal on the back cover and 2 small seals by the door hinge seal on the back cover. Please note that some cameras may use a film reminder window that requires foam, at this time we do not have a source for that seal, and is not included in this kit.
Please note this is an "N" kit for the X Series listed and updates the older cameras also. Adding the short top and bottom back cover channel seals, hinge end updates the camera. Minolta determined that under certain outside lighting conditions, the film perforations could be slightly fogged near the counter lever.
USCamera light seal placement guides for this Minolta film cameras here.Â
Installation and removal instructions always available online 24/7.
