Mamiya M645 Light Seals
USCamera custom light seal kit for the Mamiya M645 series of medium format SLR cameras. This includes the M645, M645J, M645 1000, and the M645 1000S. This 11-piece light seal kit is made of 2 kits. First, is the back cover kit includes 1 upper channel seal, 1 lower channel seal, and the left/right channel seals on the back cover. 2nd would be the camera body kit and includes 1 door hinge seal, 1 upper channel latch plate seal, 1 left channel seal, 1 seal above the counter lever opening, and 1 short seal below the same lever. Then the overlay latch plate seal which placed over the 1st latch plate seal. With the exception of the overlay latch plate seal, all other seals have adhesive already applied. To install, just peel off the backing and press it into place. Top Quality kit using imported open cell foam. If you need the mirror cushion seal set, we also make a kit of perfectly cut pieces, in stock here. Please note. The image in this ad for the camera body seals shows the top overlay latch plate seal is shaped like a "C". That is actually a straight foam seal. It can easily fit any shape since it is soft foam. However, to get that photo of it shaped like "C", I used some clear wax you can't see in the image, to hold that shape for the picture.
USCamera light seal placement guide for this Mamiya film camera, Go here.
Removing and replacing light seal can be a challenge, our instructions can help you.
Nikon Nikkormat Light Seals
USCamera custom light seal kit fits Nikkormat-Nikomat models including FS, FT, FTn, FT2, and the FT3. The kit includes 2 door channel seals on the camera body, 1 mirror cushion and 1 door hinge seal on the camera body. USCamera Foam Made in Japan.
USCamera light seal placement guide for this Nikon camera, go here
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Canon FTb Light Seals
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, and TX film cameras. Th 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Mamiya RB67 Mirror Seals
USCamera custom mirror seal kit for Mamiya RB67, RB67 Pro S and RB67 Pro SD camera body. This seal kit includes the seals on each side of the mirror, 2 mirror damper cushions on the top inside mirror cage frame and 1 mirror baffle seal on the back of the mirror frame.
Light seal removal and installation help is always available.
Placement guide for this kit is available here. Coming Soon!
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described.
If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit, go here.
USCamera light seal placement guide for the Pentax MX mirror cushion kit, go here.
Mamiya RB Back Insert Seals
USCamera custom 6 piece light seal kit for the Mamiya RB 67 Pro / Pro S 120, 220 and 645 film-back inserts only. This 1/2 of what I recommend you replace. The other 1/2 is the shell kit
The RB film back consists of the shell and insert. In checking film backs for years, if the shell seals are bad so are the insert seals, for that reason, I recommend replacing them as a set. You may purchase the complete film back kit here.
The insert kit includes door channel seals on the back of the top and bottom covers, top/bottom seals left guide roller plate and top/bottom seals right guide roller plate.
Make sure to check out the placement guide for the RB Pro and Pro S film back insert, and shell here.
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
USCamera Free Monthly Download
Nikon SB 22 Flash Instruction Manual
This month's free download is for the Nikon SB 22 Speedlight flash instruction manual. Premium Quality High-Resolution scans from an original owner's manual. Download available immediately after payment is accepted. 2 download limit for the file(s) purchased never expires. Make sure your download is delivered smoothly and hassle-free. Make a user account when checking out. More information on that here.
55-page PDF 11.3 MB
Nikon SB-22 Owners Manual
Minolta XD Light Seals
USCamera custom made Light Seal Kit for the Minolta XD, XD-5, XD-7 and the XD11. This light seal kit consists of 2 door channel seals for the camera body, 1 mirror cushion, 1 door hinge seal on the back cover and 2 small seals by the door hinge seal on the back cover.
USCamera light seal placement guide for the Minolta XD series film camera.
Light Seal Foam Sheet 2mm w/ Adhesive
Olympus XA2 Light Seals
USCamera custom light seal kit will fit the Olympus XA2 compact film camera. Only fits the model listed. This seal kit includes 2 door channel seals for the camera body, 2 door channel seals on the back cover, 1 back cover door hinge seal and 1 door latch plate seal on the back cover.
USCamera light seal placement guide for this Olympus camera, go here.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Canon C58-6041 USB Cable
Genuine Canon USB cable with the protector for the EOS 5Ds and EOS 5Ds R digital cameras. This cable assembly includes the cable, cable protector clip, and cable protector base assembly. The cable base and protector clip are attached to the cable when assembled. This part has been discontinued, limited stock is available. Made by Canon China.
Manfrotto R055,04 Lock Lever
Genuine Manfrotto R055,04 lock lever, screw, washer set for the 055, 055B, 075B, 075, 079B, 098, 098B, 098SH, 098SHB, 254B, 254, 055SH ,3021 and 3221. This is the single spiral lock lever. Made by Manfrotto Italy.
Please note. Compare the image of the lever face with your broken part. They should look the same.
Mamiya RB Back Shell Seals
This USCamera custom seal kit will service one RB 67, RB 67 Pro, Pro S 120, 220, and 645 film back shell. This 1/2 of what I recommend you replace. The other 1/2 is the insert kit
The RB film back consists of the shell and insert. In checking film backs for years, if the shell seals are bad so are the insert seals. I recommend replacing them as a set. You may purchase the complete film back kit here.
This is the shell kit only and includes 2 door channel seals on the back cover, 1 back cover hinge seal and 1 back cover door latch seal.
USCamera RB 67 film back placement guide will help with installing the shell kits. Look here
Light Seal Foam Sheet 1.5mm w/ Adhesive
Light Seal Foam Sheet 1mm w/Adhesive
Canon XA9-1306 EF Barrel Screws
Canon C58-6121 USB Cable
Genuine Canon USB cable with protector for EOS 5D MK IV digital cameras. This cable assembly includes the cable, cable protector clip, and cable protector base assembly. Made by Canon China. Please note, we receive many requests for the cable protector clip or the cable base assembly only for this cable. Currently, those items are only available with the cable assembly and not available separately.
Custom Foam Seals Short
Light Seals, Canon Light Seals, Contax Light Seals, Cosina Light Seals, Fuji Fujica Light Seals, Kalimar Light Seals, Konica Light Seals, Leica Light Seals, Light Seal Sheets, Light Seal Strips, Mamiya Light Seals, Minolta Light Seals, Miranda Light Seals, Nikon Light Seals, Olympus Light Seals, Pentax Light Seals, Petri Light Seals, Praktica Light Seals, Ricoh Light Seals, Vivitar Light Seals, Yashica Light Seals
We cut thousands of pieces of foam and try to re-cycle everything we can. However, we just have more short pieces than we will ever use. This is premium foam, just leftovers. Perfect size to cut for any application requiring short pieces of foam 75-100mm and under. This is the gray open cell foam from Japan. We sold this foam for years until it was dis-continued. Limited quantities of all sizes listed. Once they are gone, that's all.
Close Out packaging on this USCamera premium custom foam pieces. These packages include multiple short pieces when combined are at least 50mm wide (45 for 3mmT). Each Short piece is 8-12mm wide X 75-100mm long.
Help with removing and installing light seal foam is always available here.
Use the option to pick the foam thickness you want.
49mm Premium Lens Cap
USCamera premium quality 49mm lens cap with cap strap for all digital or film cameras and all lenses. This lens is very practical for many applications because it can removed by pinching the release on the outside or the center of the cap. A must have for many digital compact cameras where the lens retracts. Made by USCamera China.
Manfrotto R1039,18 Rubber Foot
Genuine Manfrotto Rubber Foot set for the MKBFRA4-BHCN, MKBFRA4-BH, MKBFRC4-BH, MKBFRA4D-BH, MKBFRA4G-BH, MKBFRA4L-BH, MKBFRA4R-BH, MKBFR1A4B-BH, MKBFR1A4B-BHUS, MKBFR1A4D-BH, MKBFR1A4D-BHUS, MKBFR1A4R-BH, and MKBFR1A4R-BHUS Befree tripods. This foot set includes the rubber foot and retaining screw. Made by Manfrotto Italy.
52mm Premium Lens Cap
Premium quality 52mm lens cap with cap strap for all digital or film cameras and all lenses. This lens is very practical for many applications because it can removed by pinching the release on the outside or the center of the cap. A must have for many digital compact cameras where the lens retracts. Package of 1 cap and strap.
