Miranda dx-3 Light Seals
$7.50
USCamera custom light seal kit for the Miranda dx-3 35mm film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 latch plate seal back cover by the door latch and 1 door hinge seal on the hinge end of the back cover. Premium quality seals made of imported open cell foam Made in Japan.
Help with removal, and replacement of foam seals is always available online.
USCamera light seal placement guide for this Miranda camera.
Separating the adhesive from the backing can be difficult for some. This video may help.
Please note: On the back cover the original seals on the back cover are made of a felt type material. It is not necessary to replace these, we have never seen these seals worn out. They may not look healthy but they are most likely fine. We supply them to you, however, replace only if missing or damaged.
In stock
0
People watching this product now!
Description
Miranda dx-3 Light Seals | 35mm SLR Film Cameras
USCamera Custom Light seals | Vintage 35mm Film Parts | Owner – User – Parts – Service Manual Downloads
Miranda dx-3 Light Seals | 35mm SLR
Custom Light Seals
USCamera Free Monthly Download | Every Month | Always Free
USCamera has tens of thousands of new and used parts for cameras, flash, lenses, motor drives, and much more.1
Please contact us with any questions or requests.
New light seals, parts and also downloads are added almost every day.
Shop all USCamera Light seal kits for Miranda.
All USCamera foam products start as imported black open cell poly-urethane open cell foam.
Do you want to make your own light seal kit? Maybe you also have a item that needs a certain size of the light seal foam. We can help.
Many times sheet foam can be best. We have foam sheet in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm always in stock.
Also, we have many strips of light seal foam cut to width and 220 mm long.
USCamera Since 1998
Custom Miranda Light Seal Kits | Service Parts | Part Catalogs | Repair Manual | Vintage Film Camera Spares
For help with removal and installing foam. Following the link to that short read can improve the quality of your light seal install.
USCamera Since 1998 | Genuine Minolta Camera, Lens, Flash Parts | Light Seal Kits | Foam Sheets | Service Manual Downloads | Miranda dx-3 Light Seals | 35mm SLR
Also, USCamera light seal placement guides can really help you if the old light seals have been removed.
USCamera light seal placement guide for this Miranda camera.
First of all, the most needed and time-consuming work is removing the old seals. Focus on clean, clean, and clean.
Likewise, remove the old seals from the door channels, mirror cushion area, door hinge area and any where else you are replacing the seals, must be spotless.
The finest adhesive in the world will not adhere to that sticky goo that was once a foam light seal.
Furthermore, proper installation will give you thousands of light tight exposures.
Miranda dx-3 Light Seals | 35mm SLR
Lastly, always made to inspire…see the New film products.
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Olympus OMG Light Seals
USCamera custom light seal kit for the Olympus OMG OM20 film cameras. This 7-piece seal kit includes lower/upper channel seals for the camera body, 1 camera body hinge seal, 1 mirror cushion, 1 back cover hinge end upper channel seal, and lower/upper seals just under the film cassette spring (latch end, back cover).
USCamera light seal placement guide for this Olympus film camera here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Ricoh KR5 Super-II Seals
This custom light seal kit fits the Ricoh KR5 Super II film cameras. The kit includes 2 door channel seals on body, 2 door channel seals on back cover(hinge end), 2 door channel seals on back cover(latch end), 1 hinge seal on camera body and 1 replacement mirror cushion.
Installation help shown below.
Vivitar V3000s Light Seals
USCamera 6 piece custom light seal kit for the Vivitar V3000s, and V3800Â film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door latch seal back cover, 1 upper door channel seal back cover and 1 door hinge seal on the back cover.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-1 Light Seals
USCamera 7 piece custom light seal kit for the Yashica FX-1 and FX-2 film cameras. This kit includes 2 door channel seals for the camera body, 1 camera body hinge seal, 1 latch plate seal on the back cover, 2 small back cover hinge side back cover channel seals and 1 custom cut mirror cushion like the original.
USCamera light seal placement guide for this model Yashica film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-D Quartz Light Seals
USCamera 6 piece custom light seal kit for the Yashica FX-D Quartz film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 back cover latch plate seal, and 1 mirror cushion.
USCamera light seal placement guide for this model Yashica film camera here.
Reviews
There are no reviews yet.