Miranda dx-3 Light Seals
$7.50
USCamera custom light seal kit for the Miranda dx-3 35mm film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 latch plate seal back cover by the door latch and 1 door hinge seal on the hinge end of the back cover. Premium quality seals made of imported open cell foam Made in Japan.
Help with removal, and replacement of foam seals is always available online.
USCamera light seal placement guide for this Miranda camera.
Separating the adhesive from the backing can be difficult for some. This video may help.
Please note: On the back cover the original seals on the back cover are made of a felt type material. It is not necessary to replace these, we have never seen these seals worn out. They may not look healthy but they are most likely fine. We supply them to you, however, replace only if missing or damaged.
In stock
0
People watching this product now!
Description
Miranda dx-3 Light Seals | 35mm SLR Film Cameras
USCamera Custom Light seals | Vintage 35mm Film Parts | Owner – User – Parts – Service Manual Downloads
Miranda dx-3 Light Seals | 35mm SLR
Custom Light Seals
USCamera Free Monthly Download | Every Month | Always Free
USCamera has tens of thousands of new and used parts for cameras, flash, lenses, motor drives, and much more.1
Please contact us with any questions or requests.
New light seals, parts and also downloads are added almost every day.
Shop all USCamera Light seal kits for Miranda.
All USCamera foam products start as imported black open cell poly-urethane open cell foam.
Do you want to make your own light seal kit? Maybe you also have a item that needs a certain size of the light seal foam. We can help.
Many times sheet foam can be best. We have foam sheet in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm always in stock.
Also, we have many strips of light seal foam cut to width and 220 mm long.
USCamera Since 1998
Custom Miranda Light Seal Kits | Service Parts | Part Catalogs | Repair Manual | Vintage Film Camera Spares
For help with removal and installing foam. Following the link to that short read can improve the quality of your light seal install.
USCamera Since 1998 | Genuine Minolta Camera, Lens, Flash Parts | Light Seal Kits | Foam Sheets | Service Manual Downloads | Miranda dx-3 Light Seals | 35mm SLR
Also, USCamera light seal placement guides can really help you if the old light seals have been removed.
USCamera light seal placement guide for this Miranda camera.
First of all, the most needed and time-consuming work is removing the old seals. Focus on clean, clean, and clean.
Likewise, remove the old seals from the door channels, mirror cushion area, door hinge area and any where else you are replacing the seals, must be spotless.
The finest adhesive in the world will not adhere to that sticky goo that was once a foam light seal.
Furthermore, proper installation will give you thousands of light tight exposures.
Miranda dx-3 Light Seals | 35mm SLR
Lastly, always made to inspire…see the New film products.
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Pentax 67 Seal Kit
USCamera custom light seal kit for the Pentax 67 film cameras. This 8 piece custom seal kit consists of 3 door channel seals on the camera body, 1 back cover hinge seal, 2 back cover door channel seal, 1 camera body door latch seal, and 1 replacement mirror cushion. USCamera light seal placement guide for this Pentax film camera here.
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described. If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit.
USCamera light seal placement guide for the Pentax MX mirror cushion kit.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Sears KSX Light Seals
USCamera custom light seal kit for the Ricoh Sears KS, KS Auto, KS1, KS Super, KS Super II, KS2, KS1000, KS500, KSX, and KSX Super and other film cameras. This kit may fit other Sears/Ricoh models but we do not have many other Sears model cameras to check for proper fit. This 7-piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on body, 1 back cover latch plate seal and 1 mirror cushion. Tech Note. If your camera has a film reminder window, this kit does not include the light seal around that window.
The USCamera light seal placement guide for this kit is online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar XC3-XC4 Light Seals
 USCamera custom light seal kit for the Vivitar XC-1, XC-2, XC-3, and the XC-4 film cameras. This 6 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals latch end, back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for XC series Vivitar film cameras.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica Electro-35 Light Seals
USCamera 6 piece custom light seal kit for the Yashica Electro 35 Series including the G, GS, GT, GSN, and GTN. This seal kit includes 2 door channel seals on the body, back cover door latch seal, 2 short channel seals on back cover latch end and 1 hinge seal on the back cover.
USCamera light seal placement guide for this Yashica film camera, here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-D Quartz Light Seals
USCamera 6 piece custom light seal kit for the Yashica FX-D Quartz film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 back cover latch plate seal, and 1 mirror cushion.
USCamera light seal placement guide for this model Yashica film camera here.
Reviews
There are no reviews yet.