Minolta XE Light Seals
$8.25
USCamera custom made light seal kit for the Minolta XE, XE-1m XE-5, and XE-7 film cameras. This seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 mirror cushion and 1 door hinge seal on the back cover.
USCamera placement guide for this Minolta light seal kit, here.
Removing the foam from the backing can be difficult for some. This video may help.
USCamera light seal placement guide for this Minolta film camera here.
In stock
0
People watching this product now!
Description
Minolta XE Light Seals | XE-1 | XE-5 | XE-7
USCamera | Custom Minolta Light Seals | Accessories | Lenses | Parts | SLR Film Cameras | Owner – Parts – Service – User Manual Downloads | Pro Light Seal Installs
Minolta XE Light Seals | XE-1 | XE-5 | XE-7
USCamera Free Monthly Download | Every Month | Always Free
New light seal kits, also downloads, and spare parts are added almost every day.
Please contact us with any questions or requests you may have.
Do you want to make your own light seal kit?
Maybe you have an item that needs a certain size of light seal foam. We can help with that also.
Many times sheet foam can be best. We stock foam sheets in a thickness of 1mm, 1.5mm, 2mm, 2.5mm, and 3mm.
We have many strips of light seal foam already cut to width and 220 mm long.
For help with installing and removing light seals. Following the link to that short read will help improve the quality of your install.
USCamera Online Since 1998
Genuine Parts | Service Manuals | Part Lists | Light Seal Kits | Foam Sheet | Vintage Parts | Cameras | Flash |Lenses
USCamera light seal kit placement guides can help you in placing the new seals. More so if the old light seals have been removed.
We also make light seal kits for over 100 film cameras. Shop all USCamera light seal kits for Minolta.
USCamera Since 1998 | Premium Quality Mamiya Foam Light Seals | Kits | Foam Sheets | Pre-Cut Strips | USCamera Foam | Minolta XE Light Seals | XE-1 | XE-5 | XE-7
The most important task is cleaning off the old seals. Focus on clean, clean, clean.
Likewise, remove the old foam from the door channels, and very, very carefully the mirror cushion area.
Also, remove the old door hinge and clean anywhere else you are replacing the seals.
The finest adhesive in the world will not adhere to that sticky, gooey goo that was once a foam light seal.
Minolta XE Light Seals | XE-1 | XE-5 | XE-7
An accurate and careful installation will give you thousands of light tight exposures.
Lastly, always made to inspire…see New film camera products.
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Pentax Super Program Light Seals
USCamera custom light seal kit for the Pentax Super Program, Super A, Program Plus, Program A film cameras. The body casting for these models is the same. This 5 piece kit includes 2 door channels seals for the camera body, special cut mirror cushion, back cover hinge end top channel seal, and the hinge seal on the camera body. The original hinge seal is made of type of material that does not require replacement. I do not recommend removing the original seal and. In response to many requests from customers who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. All seals have the adhesive installed. Just remove the backing from the foam and install. This kit is custom cut by USCamera and uses adhesive backed black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax light seal go here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Ricoh KR-5 Light Seals
USCamera custom light seal kit for the Ricoh KR5, KR5 Super film cameras. This custom 5 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
Light seal placement guide for this USCamera Ricoh kit, go here (coming soon)
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica Electro-35 Light Seals
USCamera 6 piece custom light seal kit for the Yashica Electro 35 Series including the G, GS, GT, GSN, and GTN. This seal kit includes 2 door channel seals on the body, back cover door latch seal, 2 short channel seals on back cover latch end and 1 hinge seal on the back cover.
USCamera light seal placement guide for this Yashica film camera, here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-1 Light Seals
USCamera 7 piece custom light seal kit for the Yashica FX-1 and FX-2 film cameras. This kit includes 2 door channel seals for the camera body, 1 camera body hinge seal, 1 latch plate seal on the back cover, 2 small back cover hinge side back cover channel seals and 1 custom cut mirror cushion like the original.
USCamera light seal placement guide for this model Yashica film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Reviews
There are no reviews yet.