Chinon CX CX II Light Seal Kit
$9.50
USCamera custom light seal kit fits the Chinon CS, CX, CX II, and GAF L-CSÂ 35mm SLR film cameras. The custom 5-piece kit includes 1 custom mirror cushion, upper/lower channel seals for the camera body, 1 back cover hinge seal, and 1 latch plate seal on the back cover. Premium USCamera foam is Made in Japan. Your will need to use an adhesive delay when installing the latch plate seal. That seal is wide, and needs to fit tight. Since that seal has the adhesive applied, I found it was easiest to lick the adhesive side really well, and then put in place quickly. I would leave the back cover open for a couple hours until that seal dries so it doesn’t move when the cover is closed. Also, I would not replace the hinge seal on this camera, unless it is missing of course. It is not made of foam and will last another 40 years if left in place.
Help with removal, and replacement of foam seals is always available online.
USCamera light seal kit placement guide for this Chinon film camera. Coming Soon!
Peeling the foam from the backing can be difficult for some. This video may help.
In stock
0
People watching this product now!
Description
Chinon CX CX II Light Seal Kit | Chinon CS | GAFÂ L-CS | 35mm SLR
USCamera | Cosina Custom Light Seals | Vintage 35mm Parts | Owner – User – Service Manual Downloads | Vintage Service
Chinon CX CX II Light Seal Kit | CS | GAFÂ L-CS | 35mm SLR
USCamera Free Monthly Download | Every Month | Always Free
Please contact us with any questions you may have. We add new parts, downloads, also photo items, and light seals almost every day.
See all of our light seal kits f0r Chinon.
USCamera light seal kits start with Premium Black Open Cell Foam.
Do you want to make your own light seal kit? Maybe you have an item that needs light seal foam. We can help with that too.
USCamera Online Since 1998
Chinon – Vintage Film Camera Light Seals | Premium Japanese Open Cell Foam | Service Manuals and Part Lists
Do you want to make your own light seal kit? Maybe you have a photo item that also requires a special size of the light seal foam.
Sometimes sheet foam is the best solution. We have foam in 1mm, 1.5mm, 2mm, 2.5mm, 3mm, and 4mm thickness in stock.
Plus, we have many pre-cut strips of light seal material 230 mm long.
For help with removing and replacing light seals, please. Also, following the link to a short read can improve the quality of your light seal install.
USCamera light seal placement guides also can help you. Especially if the old light seals have already been removed.
Chinon CX CX II Light Seal Kit | CS | GAFÂ L-CS
USCamera light seal placement guide for this Chinon body.
We make light seal kits for over 100 film cameras. Shop all Chinon light seal kits.
Chinon CX CX II Light Seal Kit | CS|Â GAFÂ L-CS | 35mm SLR
First of all, the most important work you have to do is to remove the old seals. Focus on clean, clean, clean.
Make sure to remove all traces of the old door channel seals, mirror cushion, the door hinge, and anywhere else you are replacing old seals.
The finest adhesive in the world will not adhere to that sticky goo that was once a light seal.
Finally, a proper install will give you thousands of light tight exposures.
Lastly, always made to inspire, see the New film camera products online.
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon EF Light Seals
USCamera custom light seal kit for the Canon EF Auto film cameras. The kit includes 2 door channel seals for the camera body, 1 door hinge seal and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the backing and press into place. Top Quality kit using imported open cell foam Made in Japan.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon Pellix Light Seals
USCamera custom light seal kit for the Canon Pellix film camera. This light seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal and a replacement focusing screen seal set of 4 pieces. We find it easier to install the seals surrounding the focusing 1 piece at a time. We also include foam replacements for the 4 felt type seals on the back cover. Though those seals may look in poor condition, most are fine. We only recommend replacing them if missing.
USCamera light seal placement guide for this Canon film camera here
Pentax K1000 Light Seals
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock.
Help with removal, and replacement of foam seals is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Light Seal Placement guide for this light seal kit, go here.
Ricoh KR Light Seals
USCamera custom light seal kit for the Ricoh KR10, KR10 Super, KR10X, XR6, XR7, XR10, XRS, and the Sears KS Super, KSX Super film cameras. This 7 piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on the body, 1 back cover latch plate seal and 1 mirror cushion. Light seal placement guide for this USCamera Ricoh kit.
Ricoh KR5 Super-II Seals
This custom light seal kit fits the Ricoh KR5 Super II film cameras. The kit includes 2 door channel seals on body, 2 door channel seals on back cover(hinge end), 2 door channel seals on back cover(latch end), 1 hinge seal on camera body and 1 replacement mirror cushion.
Installation help shown below.
Yashica Electro-35 Light Seals
USCamera 6 piece custom light seal kit for the Yashica Electro 35 Series including the G, GS, GT, GSN, and GTN. This seal kit includes 2 door channel seals on the body, back cover door latch seal, 2 short channel seals on back cover latch end and 1 hinge seal on the back cover.
USCamera light seal placement guide for this Yashica film camera, here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Reviews
There are no reviews yet.