Canonet 19 Light Seals
$7.25
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
In stock
0
People watching this product now!
Description
Canonet 19 Light Seals
USCamera | Custom Light Seals Canon | Canon Film Cameras
Canonet 19 Light Seals | 35mm Film Cameras Light Seals | USCamera Foam
New/Used Canon Film Camera Parts
Please Contact us for any questions you may have. Also, new downloads, parts, and light seal kits and parts are added almost every day.
All USCamera Light seal kits available for Canon
Please contact us with any questions or requests. Canonet 19 Light Seals
USCamera Kits Start with Premium Open Cell Foam
Do you want to make your own light seal kit? Maybe you have a camera accessory that requires a special size of the light seal material. We can help with that also.
Sometimes sheet foam is the best solution. We have foam in 1mm, 1.5mm, 2mm, 3mm, and 4mm thickness available. Go here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. Start here. Canonet 19 Light Seals
For help installing light seal kits please start here. Also, following the link to a short read can improve the quality of your light seal installation.
USCamera light seal kit placement guides can really help you also. Especially if the old light seals have already been removed before you acquired the camera. Start here
USCamera light seal placement guide for this Canon film camera. Go here.
Currently making light seal kits for over 90 popular film cameras. See all USCamera light seal kits available for Canon
Canon F1 Light Seals | 35mm Film Cameras
First of all, the most important work you have to do is to remove the old seals. Focus on clean, clean, clean. In addition, clean the old residue from the door channels, mirror cushion area, door hinge area and anywhere else you are replacing the seals. Furthermore, the finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Finally, proper installation will give you thousands of light tight exposures.
Film cameras may be in the past, for now, however, Canon is still going strong. Look here.
USCamera | Also Genuine Canon Camera, Flash, Lens Parts Plus | Light Seals, Foam Sheets | Service Manual Downloads | Canonet 19 Light Seals
Canonet 19 Light Seals | Premium Quality Open Cell Foam Lasts Years. Also Same High-Quality Japanese Foam As Original | Canon Film Cameras | Canon Light Seals
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Olympus OM-1 Light Seals
USCamera custom light seal kit for the Olympus models OM 1, OM 1n, OM 2 and OM 2n, OM-3, OM-4, and OM-4T. This seal kit includes 2 door channel seals for the camera body, 1 camera body door hinge seal and a 4 piece mirror cushion set.
Old foam removal and replacement information is always available online.
USCamera light seal placement guide for this Olympus film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar V3000s Light Seals
USCamera 6 piece custom light seal kit for the Vivitar V3000s, and V3800Â film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door latch seal back cover, 1 upper door channel seal back cover and 1 door hinge seal on the back cover.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica Electro-35 Light Seals
USCamera 6 piece custom light seal kit for the Yashica Electro 35 Series including the G, GS, GT, GSN, and GTN. This seal kit includes 2 door channel seals on the body, back cover door latch seal, 2 short channel seals on back cover latch end and 1 hinge seal on the back cover.
USCamera light seal placement guide for this Yashica film camera, here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-D Quartz Light Seals
USCamera 6 piece custom light seal kit for the Yashica FX-D Quartz film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 back cover latch plate seal, and 1 mirror cushion.
USCamera light seal placement guide for this model Yashica film camera here.
Yashica TL Electro-X Seals
USCamera custom light seal kit for the Yashica TL Electro X Series of film cameras. This 6 piece custom kit includes lower/upper door channel seals on the camera body, short lower/upper channel seals starting at back cover hinge end, 1 special cut mirror cushion, and 1 door hinge seal on the camera body.
Old foam removal and replacement information is always available online.
USCamera light seal placement guide for this Yashica film camera.
Removing the backing from the foam can be difficult for some. This video may help.
Reviews
There are no reviews yet.