Light Seal Placement Guides

Fujica ST701 ST801 Placement Guide

Fujica ST701 ST801 Placement Guide

Before doing anything, please go here. A short read will greatly improve the quality of your light seal installation.
Fujica ST701 ST801 Placement Guide
For more information on purchasing this Fujica kit, go here

Basic Installation Guidelines

You are installing a 7 piece kit for the Fujica ST 701 ST 801 ST 901

Tech note. Unusual for many 35mm film cameras, this model Fujica uses lower and upper channel seals on the back cover.  It is wrong to assume the door channels on the camera body need foam also. They do not.

Take all of the seals for this Fujica kit and lay them out on your work area.

Lower channel seal, back cover – 1 x 1mm
Upper channel seal, back cover – 1 x 1mm
Upper latch plate seal, camera body, latch end – 1 x 1mm
Lower latch plate seal, camera body, latch end – 1 x 1mm
Back cover latch plate seal – 1 x 2mm
Hinge seal, back cover – 1 x 1mm
Mirror cushion – 1 x 2mm

Also, I recommend beginners start with the shorter pieces first.

Door channel seals, back cover. Install the 1mm top / bottom channel seals on the back cover, starting on the right, at the latch end working left towards the hinge side.

Door channel seal, camera body. Start the install of the short 29mm long light seal on the lower channel just left of the cut-out in the body casting for the film spool of the film cassette, and work to the right.

Latch Plate seal, back cover. Install this seal on the back cover, just below the latch, centering the seal between the upper and lower channels in the back cover.

Hinge seal, camera body.  Install this seal on the back cover,hinge side, centering the seal between the upper and lower channels in the back cover.

Mirror cushion.  Now, with the utmost care, remove the old and install the new mirror cushion.  Remember if any thing touches the focusing screen, it will likely be permanently damaged.

See all USCamera light seal kits for Fujica and more, start here.

USCamera Light Seal Placement Guide | Fujica ST701 ST801

USCamera Since 1998 | Service Parts for Cameras Lenses | Light Seal Kits | Vintage Film Cameras | Fujica ST701 ST801 Placement Guide

Lastly, always made to inspire…see New film camera products.

author-avatar

About Gray

As a veteran attending National Camera's resident camera repair school in 1979, is where I found my true calling for the demanding yet extremely interesting field of photo equipment service and sales. For 25 years we grew every year. The staff and I serviced tens of thousands of film camera items, trained many technicians, met thousands of wonderful customers and truly had a fantastic time. Within 2 years of 2004, my service experience was devalued somewhat by the internet, film camera sales/service flatlined. Camera stores 50 times larger than mine were closing. I could see a new opportunity on the Internet. USCamera started as information site then became a family run internet business. Our mission remains the same, • Specialize in Vintage film equipment, mostly after 1958 • Knowledgeable • Provide quality products • Superior Service • Always available via phone - contact form – email All of us at USCamera look forward to serving you. Gray USCamera.com

Leave a Reply

Your email address will not be published. Required fields are marked *