Minolta X700 Light Seals
USCamera custom light seal kit for the Minolta X300, X300x, X370, X370n, X370s, X370, X500, X570, X600, X7, X7a, X700, and X9 film cameras. This light seal kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door hinge seal on the back cover and 2 small seals by the door hinge seal on the back cover. Please note that some cameras may use a film reminder window that requires foam, at this time we do not have a source for that seal, and is not included in this kit.
Please note this is an "N" kit for the X Series listed and updates the older cameras also. Adding the short top and bottom back cover channel seals, hinge end updates the camera. Minolta determined that under certain outside lighting conditions, the film perforations could be slightly fogged near the counter lever.
USCamera light seal placement guides for this Minolta film cameras here.Â
Installation and removal instructions always available online 24/7.
Olympus XA Light Seals
USCamera custom light seal kit for the Olympus XA compact rangefinder film camera. Only fits the model listed. This seal kit includes 2 door channel seals for the camera body, 2 door channel seals on the back cover, 1 back cover door hinge seal, and 1 door latch plate seal on the back cover.
USCamera light seal placement guide for this Olympus film camera here.
Olympus OM-1 Light Seals
USCamera custom light seal kit for the Olympus models OM 1, OM 1n, OM 2 and OM 2n, OM-3, OM-4, and OM-4T. This seal kit includes 2 door channel seals for the camera body, 1 camera body door hinge seal and a 4 piece mirror cushion set.
USCamera light seal placement guide for this Olympus film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax K1000 Light Seals
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock.
Placement guide for this light seal kit, go here.
Canon AE-1 Light Seals
USCamera custom light seal kit for the Canon A1, AE1, AE1-P, AT1, and AV1. This kit includes 2 door channel seals, door hinge seal on the back cover, door hinge seal on the camera body, and a replacement mirror cushion. Premium quality open-cell foam Made in Japan. This Canon kit is currently on sale, buy 2 get 1 free, no limit.
Use option and select one or more kits
USCamera light seal placement guide for this Canon film camera here.
Old foam removal and replacement information is always available online.
Fuji GSW690-III Light Seals
USCamera custom Light Seal Kit for the Fuji GW690 III GSW 690 III film cameras. This light seal kit consists of 2 door channel seals for the back cover, 1 latch plate seal on the back cover and 1 back cover door hinge seal.
Light seal placement guide for this Fuji camera here.
Mamiya Light-Seals Super 23
USCamera custom light seal kit for Mamiya Press or Super 23 6x9, 6x7, and 645 film backs. Â This is the replacement seal kit that includes 2 door channels seals on the door, 2 front plate seals where the back attaches to the camera(supplied in 2 pieces for ease of installation), the door hinge seal, and the door latch plate seal.
USCamera light seal placement guide for this Mamiya film back here.
Minolta SRT Light Seals
USCamera custom light seal kit for the Minolta SR and SRT Series film cameras. Including the SRM, SR505, SR505s, SR101, SR101s, SR-T 100, 100X, 101, 101b, 102 , 103, 200, 201, 202, 303b, SC, SC-II, MC, MC II and SR-T Super. There may be more models. This seal kit consists of 2 door channel seals on the camera body, hinge seal, mirror cushion and the mirror baffle cushion. Please note that the door hinge seal is made of a felt type material and does not need to be replaced, though is included in the kit.
USCamera light seal placement guide for this Minolta film camera here
Nikon F2 Light Seals
USCamera custom light seal kits for the Nikon F2 film cameras. The F2 may be known by a few designations due to the meter attached. F2S, F2 Photomic, etc.
We stock 5 and 9 piece foam kits for this Nikon model.
The 5 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, 1 finder rest that cushions the back of the viewfinder when mounted on the camera body, and the seal on the back cover by the door latch.
The 9 piece kit includes everything from the 5 piece kit Plus the left/right foam seals just behind the mirror cushion. Also the 2 foam seals used on the bottom of the DP view finders, left and right of the serial # plate. Those seals prevent the left and right covers screws from marring the bottom of the finder. Please note. I have owned F2 bodies that used a felt type seal by the door latch. I do not recommend replacing that seal with foam.
Use option to select quantity and 5-piece or 9-piece light seal kits.
USCamera light seal placement guide Nikon F2 camera 5-piece kit, go here.
USCamera light seal placement guide Nikon F2 camera 9-piece kit, go here. Soon!
Rollei TLR Repair Manual
Digital presentation of a genuine Factory Rollei Twin Lens Reflex repair manual, part lists, exploded views, and more. The manual includes all required adjustments, troubleshooting, and more for the Rollei Twin Lens Reflex cameras listed. In August of 1972, this manual was made available to technicians, repair shops, and service centers. This is the most complete factory service manual ever produced by Rollei for these TLR cameras. However, it did not include every TLR they ever made. The service manual includes Rolleicord V, VA, VB, Rolleiflex 3.5 F, 3.5 E2, 3.5 E3, 2.8 E, 2.8F, 2.8 E2, 2.8 E3, 4x4, T, Rolleimagic, Rolleimagic II and Tele Rolleiflex 220. High-Resolution scans of an original factory service manual. Amazing detail at 600 DPI resolution. Easy 600% magnification. Written in German and English. Download available immediately after payment is accepted. 2 download limit for the file(s) purchased never expires.
Make sure your download is delivered smoothly and hassle free. Make a user account when checking out. More information on that here.
493 page PDF 48.3 MB
Rollei TLR Repair Manual
Mamiya C-Series Light Seals
USCamera custom back cover light seal kit for the most Mamiya C-Series TLR Camera Bodies including the C2, C22, C220, C220f C3, C33, C330, C330f, and the Mamiya Flex C. This kit includes the door hinge seal on the back cover and the top/left / right door seal on the back cover. The light seals have the adhesive already applied and to install you just peel off the backing and press into place. Top Quality seals made of imported open cell foam. Tech note: When installing this kit on the MamiyaFlex, you may need to cut the length of upper and lower channel seals. It appears from the cameras we have, the Mamiya flex door is a slightly smaller than the newer model Mamiya TLRs. Need the C330-S kit?
USCamera light seal placement guide for this Mamiya go here.
Helpful advice on light seal remove and replace is always available.
Peeling the foam from the backing can be difficult for some. This video may help.
Minolta XG Light Seals
USCamera custom-made light seal kit for the Minolta XG Series film cameras both new and old-style including XG1, XG7, XG9, XGM, XG-A, XG SE, and more. New style cameras have the "world" logo in the letter "O" on the top cover's front nameplate. This light seal kit includes 2 door channel seals for the camera body, 1 mirror cushion, and 1 door hinge seal on the back cover. The "N" model update and addition to the old style XG's are the 2 small seals by the door hinge seal on the back cover.
Light Seal Placement guide for this Minolta light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Nikon Nikkormat Light Seals
USCamera custom light seal kit fits Nikkormat-Nikomat models including FS, FT, FTn, FT2, and the FT3. The kit includes 2 door channel seals on the camera body, 1 mirror cushion and 1 door hinge seal on the camera body. USCamera Foam Made in Japan.
USCamera light seal placement guide for this Nikon camera, go here
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Yashica Electro-35 Light Seals
USCamera 6 piece custom light seal kit for the Yashica Electro 35 Series of film cameras. This seal kit includes 2 door channel seals on the body, back cover door latch seal, 2 short channel seals on back cover latch end and 1 hinge seal on the back cover.
USCamera light seal placement guide for this Yashica film camera, here.
Ricoh FF70 FF90 Repair Manual
USCamera digital presentation of a genuine Ricoh FF70 FF90 compact film camera service manual, exploded views, and parts list. Includes disassembly, adjustments, and more. Premium quality 1st generation High-Resolution black and white scans. Much easier to read and better contrast than most downloads. Easy 400% magnification. Download available immediately after payment is accepted. 2 download limit for the file(s) purchased never expires. Make sure your download is delivered smoothly and hassle-free. Make a user account when checking out. More information on that here.
43-page PDF 12.3 MB
Ricoh FF70 FF90 Repair Manual
Ricoh XR-P Repair Manual
USCamera digital presentation of a Ricoh XR-P Multi-Program 35mm film camera service manual exploded views, and parts list. Premium quality 1st generation High-Resolution black and white scans. Much easier to read and better contrast than most downloads. Easy 400% magnification. Download available immediately after payment is accepted. 2 download limit for the file(s) purchased never expires. Make sure your download is delivered smoothly and hassle-free. Make a user account when checking out. More information on that here.
63-page PDF 14.2 MB
Ricoh XR-P Repair Manual
Canon EOS 1D Mark III Multi Controller Button
USCamera Import Canon New style multi controller button,and button cover set for the EOS 1D Mark III, and the 5D Mark III digital camera. Sold as pictured. Made in China for USCamera.
Limited stock of the original MC button, 2nd style MC button, and MC button cover compatible with with version are currently available. Tech Note. The main difference of the old style and new style MC button, the 4 tabs make it difficult if not impossible to install the button or remove without back cover dis-assembly. The 1st style 1D Mk III button design allowed the button to fall off easily.
Nikon Nikkormat Light Seals – PRO
USCamera custom light seal kit fits Nikkormat, Nikomat models including FT, FTn, and the FT2. The 6-piece pro kit includes 2 door channel seals on the camera body, 1 mirror cushion, 1 door hinge seal on the camera body, 1 eyepiece frame seal, and 1 meter window seal. Please note. The top cover must be removed to install the meter window seal and the eyepiece frame seal. Also, the finder frame seal is underneath the frame, so it must be removed to install that seal. Please Note. The meter window seal in this kit does not fit the FT3.
USCamera light seal placement guide for this Nikon Pro kit..... Coming Soon! Non pro kit here
Pentax 67 6X7 TTL Prism Finder Foam
USCamera made Pentax custom cut viewfinder seals with adhesive applied for the TTL Penta Prism Viewfinder for the 67 and 6X7 vintage 120/220Â format film cameras. Available as 2 piece or 1 piece seal kit. Some customers found the 2 piece kit was easier to install.
Use Option to choose 1 or 2 piece viewfinder seal kit.
Koni-Omega Film Back Light Seals
USCamera custom cut light seal kit for the Koni-Omega Rapid 120 and 220 film backs. When looking at the pressure plate, this 5-piece light seal kit includes the left channel L-shaped seal, right channel, upper channel, lower channel, and the special foam seal for the wind clutch housing channel*. Premium Black Open Cell Foam. Made in Japan.
*Removal of the original housing channel seal is not recommended.
The USCamera light seal placement guide for this kit is online.
Canon CG2-2765-USC Battery Cover
Import Canon battery cover assembly for the EOS Rebel T2i, and EOS 550D digital cameras. Premium Quality. Made in China for USCamera. The original battery cover for this Canon was discontinued. Limited stock available here.
