Yashica FX-D Quartz Light Seals
$8.00
USCamera 6 piece custom light seal kit for the Yashica FX-D Quartz film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 back cover latch plate seal, and 1 mirror cushion.
USCamera light seal placement guide for this model Yashica film camera here.
In stock
0
People watching this product now!
Description
Yashica FX-D Quartz Light Seals
USCamera | Yashica Light Seal Kits | Foam Sheets | Custom Kits
Yashica FX-D Quartz Light Seals | Yashica Film Cameras | USCamera Foam
35mm Yashica Cameras | Medium Format Twin Lens Reflex
Please Contact us for any questions you may have. New light seal kits and parts are added almost every day.
Currently making light seal kits for many other popular film cameras also. Please contact us with any questions or requests
Our Kits Start With Premium Imported Open Cell Foam
Do you want to make your own light seal kit? Maybe you have a special film camera accessory that requires a special size of the light seal material. We can help with that also.
Sometimes sheet foam is the best solution. We have USCamera sheet foam in 1mm, 1.5mm, 2mm, 3mm, and 4mm thickness available. Look here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long, Go here.
For help installing light seal kits please go here. Following the link to that short read can improve the quality of your light seal installation.
USCamera light seal kit placement guides can really help you also. Especially if the old light seals have already been removed before you acquired the camera. See those here
See all USCamera Light seal kits available for Yashica including the Yashica FX-D Quartz Light Seals also.
35mm film cameras, yashica film cameras, film camera repair kit, light seal kits
First of all, the most important and time-consuming work is removing the old seals. Focus on clean, clean, clean.
Clean the old residue from the door channels, mirror cushion area, door hinge area and anywhere else you are replacing the seals.
The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Lastly, proper installation will give you thousands of light tight exposures.
Always exciting, film cameras may be in the past, for now, however, Yashica is trying to find their place again. Go here.
USCamera | Genuine Olympus Camera, Flash, Lens Parts + | Light Seal Kits, Foam Sheets | Service Manual Downloads +| Yashica FX-D Quartz Light Seals
Yashica FX-D Quartz Light Seals | Premium Quality Open Cell Foam Lasts Years. Same High-Quality Japanese Foam As Original | Yashica Film Cameras | USCamera Foam
Additional information
| Weight | 1 oz |
|---|
Reviews (1)
1 review for Yashica FX-D Quartz Light Seals
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon Pellix Light Seals
USCamera custom light seal kit for the Canon Pellix film camera. This light seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal and a replacement focusing screen seal set of 4 pieces. We find it easier to install the seals surrounding the focusing 1 piece at a time. We also include foam replacements for the 4 felt type seals on the back cover. Though those seals may look in poor condition, most are fine. We only recommend replacing them if missing.
USCamera light seal placement guide for this Canon film camera here
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described. If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit.
USCamera light seal placement guide for the Pentax MX mirror cushion kit.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax Super Program Light Seals
USCamera custom light seal kit for the Pentax Super Program, Super A, Program Plus, Program A film cameras. The body casting for these models is the same. This 5 piece kit includes 2 door channels seals for the camera body, special cut mirror cushion, back cover hinge end top channel seal, and the hinge seal on the camera body. The original hinge seal is made of type of material that does not require replacement. I do not recommend removing the original seal and. In response to many requests from customers who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. All seals have the adhesive installed. Just remove the backing from the foam and install. This kit is custom cut by USCamera and uses adhesive backed black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax light seal go here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Ricoh KR-5 Light Seals
USCamera custom light seal kit for the Ricoh KR5, KR5 Super film cameras. This custom 5 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
Light seal placement guide for this USCamera Ricoh kit, go here (coming soon)
Sears KSX Light Seals
USCamera custom light seal kit for the Ricoh Sears KS, KS Auto, KS1, KS Super, KS Super II, KS2, KS1000, KS500, KSX, and KSX Super and other film cameras. This kit may fit other Sears/Ricoh models but we do not have many other Sears model cameras to check for proper fit. This 7-piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on body, 1 back cover latch plate seal and 1 mirror cushion. Tech Note. If your camera has a film reminder window, this kit does not include the light seal around that window.
The USCamera light seal placement guide for this kit is online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
dcheath03 (verified owner) –
Honestly, incredible. Perfect length, thickness, width, everything. And the instructions were phenomenal. My camera’s light seals now look like new. I decided to step up the difficulty level and forgo using water to delay the adhesive and it went fine, though I would only recommend this if you have a steady hand and a lot of confidence. Cleaning out the gunk from the previous seals was the most time-consuming and important step.
Gray –
Glad to hear your install was a success and most of it was your ability. Gray