Light Seals Cut 220Lx1.20Wx1.5T-A
$8.80
USCamera imported photo grade open cell light seal foam cut strips. These strips are 220 mm long x 1.20 mm wide x 1.50 mm thick with the adhesive applied. Package of 10 strips.
In stock
0
People watching this product now!
Description
Light Seals Cut 220Lx1.20Wx1.5T-A | Premium Open Cell Foam
USCamera | Imported Light Seal Strips Cut with Adhesive
Light Seals Cut 220Lx1.20Wx1.5T-A | Premium Open Cell Foam
Photographic Grade Foam Light Seals
AÂ Â – in the listing = foam with adhesive applied
NA – in the listing = foam No adhesive applied
Before doing anything, I recommend reading about removing and replacing light seals here.
USCamera stocks premium light seal foam sheets, also strips and kits with the adhesive applied or without.
We add new parts, light seals and also downloads to our inventory almost every day.
First of all, we import all of our light material which is photographic grade open cell foam.
This product is listed as Light Seals Cut 220Lx1.20Wx1.5T-A
We also make and stock over 90 light seal kits for many popular camera models. See all kits, Start here.
USCamera Online Since 1998
Light Seal Kits | Foam Sheets | Pre-Strips | Genuine Parts | Digital | Flash | Lenses | Vintage Film Cameras
USCamera light seal kits also start with precise measurements taken from the actual make and model of the equipment.
We do not sell kits that supply you with a couple of pre-cut pieces which would be easily cut. Then supply you with material which will require you to learn how to accurately hand cut body and back cover channel seals. These seals average 1.4mm – 2mm wide and average 165mm long. Believe me, it takes a lot of practice to accurately cut seals like those. The percentage of error waste is high and accurate cuts are low.
Light Seals Cut 220Lx1.20Wx1.5T-A | Foam Seal Strips-Bulk Sheets | Premium Open Cell Foam Lasts Years | Also Same High-Quality Japanese Foam as Original | Vintage Parts | USCamera
Also, you will need to learn how to clean the old seals from your camera. Instructions for that, make sure to go here.
Additionally, you may have to cut a short piece from a body channel seal to clear the counter lever opening.
Some cameras use fabric or leather type pieces of material on the back cover or the body, usually at the latch end. We also try and note that information in the light seal placement guides. Most of the time you do not want to remove those pieces. Generally, they do not wear out. I have serviced cameras that have seen 5000 rolls plus and they are holding up.
Furthermore, USCamera placement guides can really help you if all the light seals have been removed before you acquired the equipment. See all available USCamera light seal placement guides. Go here.
Light Seals Cut 220Lx1.20Wx1.5T-A | Premium Open Cell Foam
Stocking cut light seals from 1.2 mm wide to 11 mm wide in a thickness of 1.0, 1.5, 2.0, 3.0 or 4.0 mm with adhesive. Start here.
Foam sheets are available 50 or 100mm wide by 250mm long. Look here
Lastly, USCamera has real camera tech in-house and we also truly enjoy everything about film cameras. Always available to answer any questions contact us anytime.
USCamera popular film camera light seal kits go here
Additional information
| Weight | 2 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Olympus OM-10 Light Seals
USCamera light seal kit for the Olympus OM10 film camera. This 7 custom piece seal kit includes lower/upper door channel seals for the camera body, 1 camera body door hinge seal, front mirror cushion, back cover latch plate seal, 1 lower film cassette spring cushion and 1 upper film cassette spring cushion.
Foam remove and replace help is always available, here.
USCamera light seal placement guide for this Olympus film camera here.
Removing the foam from the backing can be difficult for some. This video may help.
Pentax 67 Seal Kit
USCamera custom light seal kit for the Pentax 67 film cameras. This 8 piece custom seal kit consists of 3 door channel seals on the camera body, 1 back cover hinge seal, 2 back cover door channel seal, 1 camera body door latch seal, and 1 replacement mirror cushion. USCamera light seal placement guide for this Pentax film camera here.
Pentax Super Program Light Seals
USCamera custom light seal kit for the Pentax Super Program, Super A, Program Plus, Program A film cameras. The body casting for these models is the same. This 5 piece kit includes 2 door channels seals for the camera body, special cut mirror cushion, back cover hinge end top channel seal, and the hinge seal on the camera body. The original hinge seal is made of type of material that does not require replacement. I do not recommend removing the original seal and. In response to many requests from customers who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. All seals have the adhesive installed. Just remove the backing from the foam and install. This kit is custom cut by USCamera and uses adhesive backed black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax light seal go here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Ricoh KR Light Seals
USCamera custom light seal kit for the Ricoh KR10, KR10 Super, KR10X, XR6, XR7, XR10, XRS, and the Sears KS Super, KSX Super film cameras. This 7 piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on the body, 1 back cover latch plate seal and 1 mirror cushion. Light seal placement guide for this USCamera Ricoh kit.
Sears KSX Light Seals
USCamera custom light seal kit for the Ricoh Sears KS, KS Auto, KS1, KS Super, KS Super II, KS2, KS1000, KS500, KSX, and KSX Super and other film cameras. This kit may fit other Sears/Ricoh models but we do not have many other Sears model cameras to check for proper fit. This 7-piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on body, 1 back cover latch plate seal and 1 mirror cushion. Tech Note. If your camera has a film reminder window, this kit does not include the light seal around that window.
The USCamera light seal placement guide for this kit is online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar V3000s Light Seals
USCamera 6 piece custom light seal kit for the Vivitar V3000s, and V3800Â film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door latch seal back cover, 1 upper door channel seal back cover and 1 door hinge seal on the back cover.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-D Quartz Light Seals
USCamera 6 piece custom light seal kit for the Yashica FX-D Quartz film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 back cover latch plate seal, and 1 mirror cushion.
USCamera light seal placement guide for this model Yashica film camera here.
Reviews
There are no reviews yet.