Back to products
Canon 5D Mark II Set Button
Price range: $3.43 through $4.67
Pentax PC35AF Light Seals
$7.75
USCamera light seal kit will for the Pentax PC35AF compact 35mm camera. This kit includes lower channel seal, long upper long channel seal, short upper channel seal, and a body hinge seal. Please note, the channels are 1mm thick. You must use an adhesive delay when placing them or you will have difficult time with the install. Also note, if you look carefully at the latch end of the body, you can see some anti-reflective material. It does not wear out and should not have to be replaced.
Light seal placement guide for this seal kit, here.(coming soon)
Peeling the foam from the backing can be difficult for some. This video may help.
Foam installation and removal instructions always available online.
In stock
0
People watching this product now!
Description
Pentax PC35AF Light Seals
Custom USCamera Light seals | Vintage Pentax Film Cameras – Lenses | Light Seal Installation | Owners – Parts – Service Manual Downloads | Pro Light Seal Installs
Pentax PC35AF Light Seals | Compact 35mm
Asahi | Honeywell | Pentax
USCamera Free Monthly Download | Every Month | Always Free
New light seals, also parts, and downloads are added almost every day.
Please contact us with any questions you may have.
Top Quality light seal kits using imported open cell foam.
Do you want to make your own light seal kit?
Maybe you have a film camera item that needs a certain size of the light seal foam. We can help with that also.
Sometimes sheet foam can be best. We have foam in thicknesses of 1mm, 1.5mm, 2mm, 3mm, and 4mm.
Plus, we have many strips of light seal foam already cut to width and 220 mm long.
USCamera Since 1998
Custom Light Seal Kits | Service Parts | Part Catalogs | Repair Manual | Vintage Film Camera Spares
Before you doing anything to your camera, read about installing and removing light seal kits. Following the link to that short read can help improve your light seal install.
Also, USCamera light seal kit placement guides can really help you if the old light seals have been removed.
USCamera Since 1998 | Service parts for Cameras, Flash, Lenses | Light Seal Kits | Foam Sheet | Service Part Lists | Pentax PC35AF Light Seals | Compact 35mm
USCamera light seal placement guide for the Pentax K1000 light seal kit.
First of all, the most important and time-consuming work is to remove the old seals. Focus on clean, clean, clean.
Shop all USCamera light seal kits for Pentax.
Pentax PC35AF Light Seals | Compact 35mm
Clean the old foam from the door channels, mirror cushion area, door hinge area, and anywhere else you are renewing the seals.
The finest adhesive in the world will not adhere to that sticky goo that was once a foam light seal. A proper install will give you thousands of light tight images.
Lastly, always made to inspire, see what’s new with Pentax Image products.
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Pentax K1000 Light Seals
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock.
Help with removal, and replacement of foam seals is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Light Seal Placement guide for this light seal kit, go here.
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FR Light Seals
USCamera custom light seal kit for the Yashica FR FR1 FRII film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
USCamera custom light seal placement guide for this Yashica film camera, here
Yashica FX-1 Light Seals
USCamera 7 piece custom light seal kit for the Yashica FX-1 and FX-2 film cameras. This kit includes 2 door channel seals for the camera body, 1 camera body hinge seal, 1 latch plate seal on the back cover, 2 small back cover hinge side back cover channel seals and 1 custom cut mirror cushion like the original.
USCamera light seal placement guide for this model Yashica film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Reviews
There are no reviews yet.