Pentax MX Mirror-Cushion Set
$4.00
This USCamera 5 piece mirror cushion replacement kit will fit all of the Pentax MX cameras. 2 different kits are included in the cushion set. You may choose the one that suits your needs. Both will fit and perform equally well.
USCamera mirror cushion placement guide for this Pentax MX mirror cushion set, go here.
In stock
0
People watching this product now!
Description
Pentax MX Mirror-Cushion Set
USCamera Custom Pentax Light seals | Vintage Film Cameras
Pentax MX Mirror-Cushion Set | Film Cameras
Genuine Pentax Film Camera Spares
For help installing light seal kits please go here, before doing anything. Following the link to that short read can improve the quality of your light seal install.
Contact us with any questions you may have. New light seals, also downloads, and parts are added almost every day.
Top Quality kits using imported open cell foam
Do you want to make your own light seal kit? Maybe you have a film camera piece that requires a special size of the light seal material. We can help with that also.
Sheet foam can be the best solution in many cases. So we stock sheets in thicknesses of 1mm, 1.5mm, 2mm, 3mm, and 4mm available here.
In addition, we have many strips of light seal material already cut to width and 220 mm long here.
USCamera Since 1998
Custom Light Seal Kits | Service Parts | Part Catalogs | Repair Manual | Vintage Film Camera Spares
USCamera | Also Pentax Camera, Flash, Lens, Parts | Light Seals, Kits, Foam Sheet | Service Part List Downloads
USCamera light seal kit placement guides can help you also. Especially if the old light seals were removed before you acquired the camera, go here
USCamera mirror cushion placement guide for the Pentax MX, go here.
See all USCamera Light seal kits for Pentax
First of all, the most important and time-consuming work is removing the old seals. Focus on clean, clean, clean. Clean the old seals from the door channels, mirror cushion area, door hinge area and any other area you are replacing seals.
The finest adhesive in the world will not adhere to that sticky, gooey foam that was once a quality light seal.
Furthermore, a proper install will give you thousands of light tight exposures.
Pentax MX Mirror-Cushion Set| USCamera Custom Kits
Always New… see Pentax image products.
USCamera Online Since 1998 | Premium Quality Open Cell Foam Lasts Years | Also, Same High-Quality Japanese Foam As Original | Pentax MX Mirror-Cushion Set | USCamera
Pentax MX mirror cushion 5 piece kit includes,
The L/R finder frame pieces are common to both styles of mirror cushion.
left frame – 1 x 1mm
right frame – 1 x 1mm
Style 1 – Installation using 3 foam pieces
long front mirror cushion – 1 x 1mm
plus the 2 common L/R frame pieces
Style 2 – Installation using 4 foam pieces
short L/R mirror cushions – 2 x 2mm
plus the 2 common L/R frame pieces
Always exciting, see what’s new with Pentax imaging products
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon EF Light Seals
USCamera custom light seal kit for the Canon EF Auto film cameras. The kit includes 2 door channel seals for the camera body, 1 door hinge seal and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the backing and press into place. Top Quality kit using imported open cell foam Made in Japan.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Olympus OM-10 Light Seals
USCamera light seal kit for the Olympus OM10 film camera. This 7 custom piece seal kit includes lower/upper door channel seals for the camera body, 1 camera body door hinge seal, front mirror cushion, back cover latch plate seal, 1 lower film cassette spring cushion and 1 upper film cassette spring cushion.
Foam remove and replace help is always available, here.
USCamera light seal placement guide for this Olympus film camera here.
Removing the foam from the backing can be difficult for some. This video may help.
Pentax K1000 Light Seals
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock.
Help with removal, and replacement of foam seals is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Light Seal Placement guide for this light seal kit, go here.
Pentax Super Program Light Seals
USCamera custom light seal kit for the Pentax Super Program, Super A, Program Plus, Program A film cameras. The body casting for these models is the same. This 5 piece kit includes 2 door channels seals for the camera body, special cut mirror cushion, back cover hinge end top channel seal, and the hinge seal on the camera body. The original hinge seal is made of type of material that does not require replacement. I do not recommend removing the original seal and. In response to many requests from customers who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. All seals have the adhesive installed. Just remove the backing from the foam and install. This kit is custom cut by USCamera and uses adhesive backed black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax light seal go here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Ricoh KR Light Seals
USCamera custom light seal kit for the Ricoh KR10, KR10 Super, KR10X, XR6, XR7, XR10, XRS, and the Sears KS Super, KSX Super film cameras. This 7 piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on the body, 1 back cover latch plate seal and 1 mirror cushion. Light seal placement guide for this USCamera Ricoh kit.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Reviews
There are no reviews yet.