Miranda Sensomat Light Seals
$7.50
This USCamera custom 5-piece light seal kit fits the Miranda models F, FM, Fv, FvT, G, GT, RE, and RE-II 35mm film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 latch plate seal back cover by the door latch and 1 door hinge seal on the hinge end of the back cover. All seals are machine cut for accuracy and the adhesive is already applied. To install, carefully peel adhesive form the backing and press into place. Premium quality seals made of imported open cell foam.
USCamera light seal placement guide for this Miranda camera.
Peeling the peeling adhesive from the backing can be difficult for some. This video may help.
Please note: On the back cover the original seals on the back cover are made of a felt type material. It is not necessary to replace these, we have not seen these seals worn out. They may not look healthy but they most likely are fine. We supply them to you, however, replace only if missing or damaged.
In stock
0
People watching this product now!
Description
Miranda Sensomat Light Seals | F | FM | Fv | FvT | G | GT | RE | RE-II | 35mm SLR Film Cameras
USCamera Custom Light seals | Vintage 35mm Film Parts | Owner – User – Parts – Service Manual Downloads
Miranda Sensomat Light Seals | F | FM | Fv | FvT | G | GT | RE | RE-II | 35mm Film SLR
USCamera Free Monthly Download | Every Month | Always Free
USCamera has tens of thousands of new and used parts for cameras, flash, lenses, motor drives, and much more.
Please contact us with any questions or requests.
New light seals, parts and also downloads are added almost every day.
All USCamera foam products start as imported black open cell poly-urethane open cell foam.
Do you want to make your own light seal kit? Maybe you also have a item that needs a certain size of the light seal foam. We can help.
Many times sheet foam can be best. We have foam sheet in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm always in stock.
Also, we have many strips of light seal foam cut to width and 220 mm long.
USCamera Since 1998
Custom Miranda Light Seal Kits | Service Parts | Part Catalogs | Repair Manual | Vintage Film Camera Spares
For help with removal and installing foam. Following the link to that short read can improve the quality of your light seal installation.
USCamera Since 1998 | Genuine Minolta Camera, Lens, Flash Parts | Light Seal Kits | Foam Sheets | Service Manual Downloads | Miranda Sensomat Light Seals | F | FM | Fv | FvT | G | GT | RE | RE-II | 35mm SLR
Also, USCamera light seal placement guides can really help you if the old light seals have been removed.
See all USCamera Light seal kits for Miranda.
First of all, the most needed and time-consuming work is removing the old seals. Focus on clean, clean, and clean.
Likewise, remove the old seals from the door channels, mirror cushion area, door hinge area and any where else you are replacing the seals, must be spotless.
The finest adhesive in the world will not adhere to that sticky goo that was once a foam light seal.
Furthermore, proper installation will give you thousands of light tight exposures.
Miranda Sensomat Light Seals | F | FM | Fv | FvT | G | GT | RE | RE-II | 35mm SLR
Lastly, always made to inspire…see the New film products.
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described. If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit.
USCamera light seal placement guide for the Pentax MX mirror cushion kit.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar XC3-XC4 Light Seals
 USCamera custom light seal kit for the Vivitar XC-1, XC-2, XC-3, and the XC-4 film cameras. This 6 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals latch end, back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for XC series Vivitar film cameras.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica Electro-35 Light Seals
USCamera 6 piece custom light seal kit for the Yashica Electro 35 Series including the G, GS, GT, GSN, and GTN. This seal kit includes 2 door channel seals on the body, back cover door latch seal, 2 short channel seals on back cover latch end and 1 hinge seal on the back cover.
USCamera light seal placement guide for this Yashica film camera, here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-1 Light Seals
USCamera 7 piece custom light seal kit for the Yashica FX-1 and FX-2 film cameras. This kit includes 2 door channel seals for the camera body, 1 camera body hinge seal, 1 latch plate seal on the back cover, 2 small back cover hinge side back cover channel seals and 1 custom cut mirror cushion like the original.
USCamera light seal placement guide for this model Yashica film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-D Quartz Light Seals
USCamera 6 piece custom light seal kit for the Yashica FX-D Quartz film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 back cover latch plate seal, and 1 mirror cushion.
USCamera light seal placement guide for this model Yashica film camera here.
Reviews
There are no reviews yet.