Miranda dx-3 Light Seals
$7.50
USCamera custom light seal kit for the Miranda dx-3 35mm film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 latch plate seal back cover by the door latch and 1 door hinge seal on the hinge end of the back cover. Premium quality seals made of imported open cell foam Made in Japan.
Help with removal, and replacement of foam seals is always available online.
USCamera light seal placement guide for this Miranda camera.
Separating the adhesive from the backing can be difficult for some. This video may help.
Please note: On the back cover the original seals on the back cover are made of a felt type material. It is not necessary to replace these, we have never seen these seals worn out. They may not look healthy but they are most likely fine. We supply them to you, however, replace only if missing or damaged.
In stock
0
People watching this product now!
Description
Miranda dx-3 Light Seals | 35mm SLR Film Cameras
USCamera Custom Light seals | Vintage 35mm Film Parts | Owner – User – Parts – Service Manual Downloads
Miranda dx-3 Light Seals | 35mm SLR
Custom Light Seals
USCamera Free Monthly Download | Every Month | Always Free
USCamera has tens of thousands of new and used parts for cameras, flash, lenses, motor drives, and much more.1
Please contact us with any questions or requests.
New light seals, parts and also downloads are added almost every day.
Shop all USCamera Light seal kits for Miranda.
All USCamera foam products start as imported black open cell poly-urethane open cell foam.
Do you want to make your own light seal kit? Maybe you also have a item that needs a certain size of the light seal foam. We can help.
Many times sheet foam can be best. We have foam sheet in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm always in stock.
Also, we have many strips of light seal foam cut to width and 220 mm long.
USCamera Since 1998
Custom Miranda Light Seal Kits | Service Parts | Part Catalogs | Repair Manual | Vintage Film Camera Spares
For help with removal and installing foam. Following the link to that short read can improve the quality of your light seal install.
USCamera Since 1998 | Genuine Minolta Camera, Lens, Flash Parts | Light Seal Kits | Foam Sheets | Service Manual Downloads | Miranda dx-3 Light Seals | 35mm SLR
Also, USCamera light seal placement guides can really help you if the old light seals have been removed.
USCamera light seal placement guide for this Miranda camera.
First of all, the most needed and time-consuming work is removing the old seals. Focus on clean, clean, and clean.
Likewise, remove the old seals from the door channels, mirror cushion area, door hinge area and any where else you are replacing the seals, must be spotless.
The finest adhesive in the world will not adhere to that sticky goo that was once a foam light seal.
Furthermore, proper installation will give you thousands of light tight exposures.
Miranda dx-3 Light Seals | 35mm SLR
Lastly, always made to inspire…see the New film products.
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Ricoh KR Light Seals
USCamera custom light seal kit for the Ricoh KR10, KR10 Super, KR10X, XR6, XR7, XR10, XRS, and the Sears KS Super, KSX Super film cameras. This 7 piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on the body, 1 back cover latch plate seal and 1 mirror cushion. Light seal placement guide for this USCamera Ricoh kit.
Sears KSX Light Seals
USCamera custom light seal kit for the Ricoh Sears KS, KS Auto, KS1, KS Super, KS Super II, KS2, KS1000, KS500, KSX, and KSX Super and other film cameras. This kit may fit other Sears/Ricoh models but we do not have many other Sears model cameras to check for proper fit. This 7-piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on body, 1 back cover latch plate seal and 1 mirror cushion. Tech Note. If your camera has a film reminder window, this kit does not include the light seal around that window.
The USCamera light seal placement guide for this kit is online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar V3000s Light Seals
USCamera 6 piece custom light seal kit for the Vivitar V3000s, and V3800Â film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door latch seal back cover, 1 upper door channel seal back cover and 1 door hinge seal on the back cover.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Reviews
There are no reviews yet.