Mamiya ZE Light Seals
$7.50
USCamera 6 piece custom light seal kit fits the Mamiya ZE, ZE-2, ZE-X, and ZM film cameras. This light seal kit includes 2 door channel seals on the camera body, 1 door hinge seal camera body, upper/lower door channels back cover starting at the hinge end, and a mirror cushion.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
USCamera placement guide for this Mamiya light seal.
In stock
0
People watching this product now!
Description
Mamiya ZE Light Seals | ZE-2 ZE-X
USCamera | Mamiya Custom Light Seals | Mamiya 35mm Film Cameras
Mamiya ZE Light Seals | USCamera Foam | ZE ZE2 ZEX
New/Used Mamiya Film Camera Parts
Please Contact us for any questions you may have. Also, new downloads, parts, and light seal kits and parts are added almost every day.
All USCamera Light seal kits available for Mamiya
Please contact us with any questions or requests. Mamiya ZE Light Seals
USCamera Light Seals | Premium Open Cell Foam
Do you want to make your own light seal kit? Maybe you also have a Mamiya accessory that requires a special size of the light seal material. We can help with that too.
Sometimes sheet foam is the best solution. We have our USCamera sheet foam in 1mm, 1.5mm, 2mm, 3mm, and 4mm thickness available. Go here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. Start here. Mamiya ZE Light Seals
For help installing light seal kits, please, Start here. Also, following the link to a short read can improve the quality of your light seal installation.
USCamera light seal kit placement guides can really help you also. Especially if the when old light seals have been removed before you acquired the camera. Start here
USCamera light seal placement guide for this Mamiya RZ67 film back, Go here.
Currently making light seal kits for over 90 popular film cameras. See all USCamera light seal kits available for Mamiya
Mamiya | ZE ZE-2 ZE-X | 35mm Film Cameras | Mamiya ZE Light Seals
First of all, the most important work you have to do is to remove the old seals.
Focus on clean, clean, clean. Also, carefully clean the old residue from the door channels, mirror cushion area, door hinge and anywhere else you are replacing the seals.
Furthermore, the finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Finally, proper installation will give you thousands of light tight exposures.
Film cameras may be in the past, for now, however, Mamiya Leaf is still going strong. Look here.
USCamera | Genuine Mamiya Film Camera + Lens Parts | Light Seals, Foam Sheets | Also Service Manual Downloads | Mamiya ZE Light Seals
Mamiya ZE Light Seals | Premium Quality Open Cell Foam Lasts Years. Also Same High-Quality Japanese Foam As Original | Mamiya Film Cameras | USCamera Foam
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon Pellix Light Seals
USCamera custom light seal kit for the Canon Pellix film camera. This light seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal and a replacement focusing screen seal set of 4 pieces. We find it easier to install the seals surrounding the focusing 1 piece at a time. We also include foam replacements for the 4 felt type seals on the back cover. Though those seals may look in poor condition, most are fine. We only recommend replacing them if missing.
USCamera light seal placement guide for this Canon film camera here
Canonet QL17-GIII Light Seals
USCamera custom Canon light seal kit fits the New Canonet QL 17, QL 17-L, QL 17 GIII, QL 19 GIII, QL 19N, and the Canonet 28 rangefinder cameras. The kit includes 1 upper channel seal on the camera body, 2 latch plate seals on the back cover, 1 latch channel seal on the back cover, 1 upper and 1 lower seal on the back cover. All seals have adhesive already applied and to install you just peel off the foam from the backing and carefully place it. This Canon kit is currently on sale, buy 2 get 1 free, no limit.
Use option and select one or more kits.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described. If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit.
USCamera light seal placement guide for the Pentax MX mirror cushion kit.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Ricoh KR Light Seals
USCamera custom light seal kit for the Ricoh KR10, KR10 Super, KR10X, XR6, XR7, XR10, XRS, and the Sears KS Super, KSX Super film cameras. This 7 piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on the body, 1 back cover latch plate seal and 1 mirror cushion. Light seal placement guide for this USCamera Ricoh kit.
Ricoh KR5 Super-II Seals
This custom light seal kit fits the Ricoh KR5 Super II film cameras. The kit includes 2 door channel seals on body, 2 door channel seals on back cover(hinge end), 2 door channel seals on back cover(latch end), 1 hinge seal on camera body and 1 replacement mirror cushion.
Installation help shown below.
Vivitar XC3-XC4 Light Seals
 USCamera custom light seal kit for the Vivitar XC-1, XC-2, XC-3, and the XC-4 film cameras. This 6 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals latch end, back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for XC series Vivitar film cameras.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Reviews
There are no reviews yet.