Mamiya MSX500 Light Seals
$8.50
USCamera 6 piece custom light seal kit fits the Mamiya MSX 500 and MSX 1000 35mm film cameras. This light seal kit includes 2 door channel seals on the camera body, 1 door hinge seal on the back cover, upper/lower door channels back cover and a mirror cushion.
USCamera light seal placement guide for this Mamiya film camera here.
In stock
0
People watching this product now!
Description
Mamiya MSX500 Light Seals
USCamera | Custom Light Seal Kits | Mamiya Light Seals
Mamiya MSX500 Light Seals
Mamiya Sekor / Mamiya film cameras
For help installing light seal kits, please go here. The information provided will improve the quality of your light seal kit installation.
This Mamiya light seal kit fits the MSX500 and MSX1000 35mm film cameras.
Please Contact us for any questions you may have. New light seals, downloads, and also parts are added almost every day.
All USCamera Light seal kits available for Mamiya
USCamera Light Seals | Premium Open Cell Foam
Do you want to make your own light seal kit? Maybe you also have a Mamiya accessory that requires a special size of the light seal material. We can help with that too.
Sometimes sheet foam is the best solution. We have our USCamera sheet foam in 1mm, 1.5mm, 2mm, 3mm, and 4mm thickness available. Go here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. Start here. Mamiya MSX500 Light Seals Kit
For help installing light seal kits, please, Start here. Also, following the link to a short read can improve the quality of your light seal installation.
USCamera light seal kit placement guides can also help you. Especially if the old light seals have already been removed before you acquired the camera. Start here
USCamera light seal placement guide for this Mamiya film camera, Go here.
Currently making light seal kits for over 90 popular film cameras. See all USCamera light seal kits available for Mamiya
Mamiya DSX1000 Light Seals | Mamiya 35mm SLR Film Cameras
First of all, the most important work you have to do is to remove the old seals. Focus on clean, clean, clean.
Also, carefully clean the old residue from the door channels, mirror cushion area, door hinge area and anywhere else you are replacing the seals. Furthermore, the finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Finally, proper installation will give you thousands of light tight exposures.
Film cameras may be in the past, for now, however, Mamiya Leaf is still going strong. Look here.
Mamiya MSX500 Light Seals | Premium Quality Open Cell Foam Lasts Years | Also Same High-Quality Japanese Foam As Original | Mamiya Film Cameras | USCamera Foam
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon Pellix Light Seals
USCamera custom light seal kit for the Canon Pellix film camera. This light seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal and a replacement focusing screen seal set of 4 pieces. We find it easier to install the seals surrounding the focusing 1 piece at a time. We also include foam replacements for the 4 felt type seals on the back cover. Though those seals may look in poor condition, most are fine. We only recommend replacing them if missing.
USCamera light seal placement guide for this Canon film camera here
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Pentax 67 Seal Kit
USCamera custom light seal kit for the Pentax 67 film cameras. This 8 piece custom seal kit consists of 3 door channel seals on the camera body, 1 back cover hinge seal, 2 back cover door channel seal, 1 camera body door latch seal, and 1 replacement mirror cushion. USCamera light seal placement guide for this Pentax film camera here.
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described. If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit.
USCamera light seal placement guide for the Pentax MX mirror cushion kit.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax Super Program Light Seals
USCamera custom light seal kit for the Pentax Super Program, Super A, Program Plus, Program A film cameras. The body casting for these models is the same. This 5 piece kit includes 2 door channels seals for the camera body, special cut mirror cushion, back cover hinge end top channel seal, and the hinge seal on the camera body. The original hinge seal is made of type of material that does not require replacement. I do not recommend removing the original seal and. In response to many requests from customers who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. All seals have the adhesive installed. Just remove the backing from the foam and install. This kit is custom cut by USCamera and uses adhesive backed black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax light seal go here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Ricoh KR Light Seals
USCamera custom light seal kit for the Ricoh KR10, KR10 Super, KR10X, XR6, XR7, XR10, XRS, and the Sears KS Super, KSX Super film cameras. This 7 piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on the body, 1 back cover latch plate seal and 1 mirror cushion. Light seal placement guide for this USCamera Ricoh kit.
Vivitar XC3-XC4 Light Seals
 USCamera custom light seal kit for the Vivitar XC-1, XC-2, XC-3, and the XC-4 film cameras. This 6 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals latch end, back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for XC series Vivitar film cameras.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Reviews
There are no reviews yet.