Mamiya M645 Light Seals
$11.50
USCamera custom light seal kit for the Mamiya M645 series of medium format SLR cameras. This includes the M645, M645J, M645 1000, and the M645 1000S. This 11-piece light seal kit is made of 2 kits. First, is the back cover kit includes 1 upper channel seal, 1 lower channel seal, and the left/right channel seals on the back cover. 2nd would be the camera body kit and includes 1 door hinge seal, 1 upper channel latch plate seal, 1 left channel seal, 1 seal above the counter lever opening, and 1 short seal below the same lever. Then the overlay latch plate seal which placed over the 1st latch plate seal. With the exception of the overlay latch plate seal, all other seals have adhesive already applied. To install, just peel off the backing and press it into place. Top Quality kit using imported open cell foam. If you need the mirror cushion seal set, we also make a kit of perfectly cut pieces, in stock here. Please note. The image in this ad for the camera body seals shows the top overlay latch plate seal is shaped like a “C”. That is actually a straight foam seal. It can easily fit any shape since it is soft foam. However, to get that photo of it shaped like “C”, I used some clear wax you can’t see in the image, to hold that shape for the picture.
USCamera light seal placement guide for this Mamiya film camera, Go here.
Removing and replacing light seal can be a challenge, our instructions can help you.
In stock
CompareMamiya M645 Light Seals | 645 Format SLR
USCamera | Custom Light Seals Mamiya | Mamiya M645 | M645J | M645 1000S | SLR Film Cameras
Mamiya M645 Light Seals | 645 Format SLR
New-Used Vintage Film Camera Parts
USCamera Free Monthly Download | Every Month | Always Free
New light seal kits, also downloads, and spare parts are added almost every day.
Please contact us with any questions or requests you may have.
Do you want to make your own light seal kit?
Maybe you have an item that needs a certain size of light seal foam. We can help with that also.
Many times sheet foam can be best. We stock USCamera foam sheet in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm.
We have many strips of light seal foam already cut to width and 220 mm long.
For help with installing and removing light seals. Following the link to that short read will help improve the quality of your install.
USCamera Online Since 1998
Genuine Parts | Service Manuals | Part Lists | Light Seal Kits | Foam Sheet | Vintage Parts | Cameras | Flash |Lenses
USCamera light seal kit placement guides can help you in placing the new seals. More so if the old light seals have been removed.
USCamera also makes light seal kits for over 100 film cameras. Shop all USCamera light seal kits for Mamiya.
USCamera Since 1998 | Premium Quality Mamiya Foam Light Seals | Kits | Foam Sheets | Pre-Cut Strips | USCamera Foam | Mamiya M645 Light Seals | 645 Format SLR
The most important task is removing the old seals. Focus on clean, clean, clean.
Likewise, clean the old foam from the door channels, and very carefully the mirror cushion area.
Also, remove the old door hinge and clean anywhere else you are replacing the seals.
The finest adhesive in the world will not adhere to that sticky, gooey goo that was once a foam light seal.
Mamiya M645 Light Seals | 645 Format SLR
An accurate and careful installation will give you thousands of light tight exposures.
Lastly, always made to inspire…see New film camera products.
| Weight | 1 oz |
|---|
1 review for Mamiya M645 Light Seals
Related products
Canonet QL17-GIII Light Seals
Olympus ECR Light Seals
Pentax MX Light Seals
Ricoh KR-5 Light Seals
Ricoh KR5 Super-II Seals
Installation help shown below.
Vivitar XC3-XC4 Light Seals
Yashica Electro-35 Light Seals
rancosteel –
SUPER FAST SHIPPING. AS ADVERTISED. HIGHLY RECOMMENDED. THANKS AGAIN. A+++++++++++++++++++++++++++++++++++++++++++++++++++++++++