Light Seals Cut 220Lx7.00Wx1.5T-A

Light Seals Cut 220Lx7.00Wx1.5T-A | Premium Open Cell Foam | USCamera

USCamera | Imported Light Seal Strips Cut with Adhesive
Light Seals Cut 220Lx7.00Wx1.5T-A | Premium Open Cell Foam | USCamera
Photographic Grade Foam Light Seals

A    – in the listing = foam with adhesive applied
NA – in the listing = foam No adhesive applied

Before starting, please read about removing and replacing light seals here.

USCamera Free Monthly Download | Every Month | Always Free | Go here

USCamera stocks light seal foam sheets, also strips and kits with the adhesive applied or without.

We add new parts, also light seals and downloads almost every day.

First of all, we import all of our light seal material which is photo grade polyethylene open-cell foam.

This product is listed as Light Seals Cut 220Lx7.00Wx1.5T-A

We also make and stock over 100 light seal kits for many camera models. See all USCamera kits. Start here.

USCamera Online Since 1998

Light Seal Kits | Foam Sheets | Pre-Strips | Genuine Parts | Digital | Flash | Lenses | Vintage Film Cameras

USCamera light seal kits always start with precise measurements taken from the actual make and model of the equipment.

We do not sell kits that supply you with a couple of pre-cut pieces that could be easily cut. Then supply you with a foam sheet that will require you to learn how to hand cut body and back cover channel seals.  These seals average 1.3mm – 2mm wide and average 165mm long. Believe me, it takes a lot of practice to custom cut those foam seals.

Light Seals Cut 220Lx7.00Wx1.5T-A | Also Foam Seal Strips-Bulk Sheets | Premium Open Cell Foam Lasts Years | Same High-Quality Original Japanese Foam | USCamera

Also, you will need to learn how to clean the old seals from your camera. If you need help with that. Start here.

Additionally, you may have to cut a short piece from a body channel seal to clear the counter lever opening.

Some cameras use fabric or leather type pieces on the back cover or the body, usually at the latch end. They are placed there to help prevent body casting finish rub off from the opening and closing of the cover.  We also try and note that info in the light seal placement guides. Most of the time you do not want to remove those pieces. For the most part, they do not wear out. I have serviced film cameras that have seen 5000 rolls plus and they are holding up. 5000  rolls =  around 20,000 + exposures

Furthermore, USCamera placement guides can really help you if the light seals have already been removed. See all USCamera light seal placement guides. Go here.

Light Seals Cut 220Lx7.00Wx1.5T-A | Premium Open Cell Foam | USCamera

Also stocking pre-cut light seal strip from 1.2 mm wide to 11 mm wide in a thickness of 1.0, 1.5, 2.0, 3.0 or 4.0 mm with adhesive. Start here.

Foam sheets are also stocked in 50 or 100mm wide by 250mm sheets. Go here.

Lastly, USCamera has real camera techs in-house and all of us truly enjoy all about film cameras. Always here to answer any questions. contact us anytime.

USCamera film camera light seal kits. Start here.