Light Seals Cut 220Lx5.50Wx1.0T-A

Light Seals Cut 220Lx5.50Wx1.0T-A | Premium Open Cell Foam | USCamera

USCamera | Imported Light Seal Strips Cut with Adhesive
Light Seals Cut 220Lx5.50Wx1.0T-A | Premium Open Cell Foam | USCamera
Photo Grade Foam

A    – in the listing = foam with adhesive applied
NA – in the listing = foam No adhesive applied

Before doing anything, I recommend reading about removing and replacing light seals.

USCamera Free Monthly Download | Every Month | Always Free

USCamera stocks premium light seal foam sheets, also strips, and kits with the adhesive applied or without.

We add new parts, light seals, and also downloads to our almost every day.

Please contact us with any questions or part requests.

First of all, we import all of our photo grade open cell foam light seal product from Japan.

This product is listed as Light Seals Cut 220Lx5.50Wx1.0T-A

USCamera also makes over 100 light seal kits for film cameras.

USCamera Online Since 1998

Light Seal Kits | Foam Sheets | Pre-Strips | Genuine Parts | Digital | Flash | Lenses | Vintage Film Cameras

USCamera light seal kits also start with precise measurements taken from the actual make and model of the camera.

We do not sell kits that supply you with a couple of pre-cut pieces which would be easily cut. Then supply you with the material, which will require you to learn how to accurately hand cut body and back cover channel seals.  These seals average 1.3mm – 2mm wide, and average 165 mm long. Believe me, it takes a lot of practice to accurately cut seals like those. Your waste of strips not cut correctly will be very high.

Light Seals Cut 220Lx5.50Wx1.0T-A | Foam Seal Strips-Bulk Sheets | Premium Open Cell Foam Lasts Years | Same High-Quality Original Japanese Foam | USCamera

Also, you will need to learn how to clean the old seals from your camera.

Additionally, you may have to cut a short piece from a body channel seal to clear the counter lever opening.

Some cameras use fabric or leather type pieces of material on the back cover or the body, usually at the latch end.  We also try and note that info in the light seal placement guides. Most of the time you do not want to remove those pieces. For the most part, they do not wear out. I have serviced cameras that have seen 5000 rolls plus and they are holding up.

Furthermore, USCamera placement guides can really help you if all the light seals have been removed before you purchased the camera. See all online USCamera light seal placement guides.

Light Seals Cut 220Lx5.50Wx1.0T-A | Premium Open Cell Foam | USCamera

Stocking cut light seals from 1.2 mm wide to 11 mm wide in a thickness of 1.0, 1.5, 2.0, 3.0, or 4.0 mm with adhesive.

Foam sheets are stocked 50 or 100mm wide by 200mm and 250 long.

Shop all USCamera film camera light seal kits.

Lastly, USCamera always has an experienced film camera technician in-house to answer your questions. Please contact us.