Light Seal Strips 2.5mm Thick – 230 Long
Price range: $12.84 through $25.68
USCamera imported Black open cell foam cut strips with adhesive. These strips are 2.5mm thick and 230 mm long. Made in Japan for USCamera. Use option to select width, and 12 or 24 strips.
0
People watching this product now!
Description
Light Seal Strips 2.5mm Thick – 230 Long with Adhesive | Premium Open Cell Foam | 1.75Â | 2.0 | 2.25 | 2.50 | 3.0 | 3.25 | 3.5
USCamera | Imported Light Seal Strips Cut with Adhesive
Light Seal Strips 2.5mm Thick – 230 Long with Adhesive | Premium Open Cell Foam | 1.75Â | 2.0 | 2.25 | 2.50 | 3.0 | 3.25 | 3.5
Photographic Grade Foam Light Seals
Before doing anything, I recommend reading about removing and replacing light seals.
USCamera stocks premium light seal foam sheets, also strips and kits with the adhesive applied or without.
We add new parts, light seals and also downloads to our inventory almost every day.
First of all, we import all of our light material which is photographic grade open cell foam.
This product is listed as Light Seal Strips 2.5mm Thick – 230 Long
We also make and stock over 90 light seal kits for many popular camera models. See all kits, Start here.
USCamera Online Since 1998
Light Seal Kits | Foam Sheets | Pre-Cut Strips | Genuine Parts | Digital | Flash | Lenses | Vintage Film Cameras
USCamera light seal kits also start with precise measurements taken from the actual make and model of the equipment.
We do not sell kits that supply you with a couple of pre-cut pieces which would be easily cut. Then supply you with material which will require you to learn how to accurately hand cut body and back cover channel seals. These seals average 1.4mm – 2mm wide and average 165mm long. Believe me, it takes a lot of practice to accurately cut seals like those. The percentage of errors and waste is high and accurate cuts are low.
Light Seal Strips 2,5mm Thick – 230 Long with Adhesive | Premium Open Cell Foam | Foam Sheet | Premium Open Cell Foam Lasts Years | Also Same High-Quality Original Japanese Foam | USCamera
Also, you may need to learn how to remove the old seals from your camera.
Additionally, you may have to cut a short piece from a body channel seal to clear the counter lever opening.
Some cameras use fabric or leather type pieces of material on the back cover or the body, usually at the latch end. We also try and note that information in the light seal placement guides. Most of the time you do not want to remove those pieces. Generally, they do not wear out. I have serviced cameras that have seen 2000 rolls plus and they are in good condition.
Furthermore, USCamera placement guides can really help you if all the light seals have been removed before you acquired the equipment. See all available USCamera light seal placement guides.
Light Seal Strips 2.5mm Thick – 230 Long with Adhesive | Premium Open Cell Foam | Premium Open Cell Foam | 1.75Â | 2.0 | 2.25 | 2.50 | 3.0 | 3.25 | 3.5
Stocking cut light seals from 1.3 mm wide to 11 mm wide in a thickness of 1.0, 1.5, 2.0, or 3.0mm with adhesive.
Foam sheets are available 250 long by 100 wide or 25mm wide.
Lastly, USCamera has real camera techs in-house and we also truly enjoy everything about film cameras. Always available to answer any questions contact us anytime.
USCamera makes many popular film camera light seal kits.
Film cameras are showing some renewed interest, check out what’s new.
Additional information
| Weight | 2 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon Pellix Light Seals
USCamera custom light seal kit for the Canon Pellix film camera. This light seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal and a replacement focusing screen seal set of 4 pieces. We find it easier to install the seals surrounding the focusing 1 piece at a time. We also include foam replacements for the 4 felt type seals on the back cover. Though those seals may look in poor condition, most are fine. We only recommend replacing them if missing.
USCamera light seal placement guide for this Canon film camera here
Olympus OM-10 Light Seals
USCamera light seal kit for the Olympus OM10 film camera. This 7 custom piece seal kit includes lower/upper door channel seals for the camera body, 1 camera body door hinge seal, front mirror cushion, back cover latch plate seal, 1 lower film cassette spring cushion and 1 upper film cassette spring cushion.
Foam remove and replace help is always available, here.
USCamera light seal placement guide for this Olympus film camera here.
Removing the foam from the backing can be difficult for some. This video may help.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described. If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit.
USCamera light seal placement guide for the Pentax MX mirror cushion kit.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Sears KSX Light Seals
USCamera custom light seal kit for the Ricoh Sears KS, KS Auto, KS1, KS Super, KS Super II, KS2, KS1000, KS500, KSX, and KSX Super and other film cameras. This kit may fit other Sears/Ricoh models but we do not have many other Sears model cameras to check for proper fit. This 7-piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on body, 1 back cover latch plate seal and 1 mirror cushion. Tech Note. If your camera has a film reminder window, this kit does not include the light seal around that window.
The USCamera light seal placement guide for this kit is online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-D Quartz Light Seals
USCamera 6 piece custom light seal kit for the Yashica FX-D Quartz film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 back cover latch plate seal, and 1 mirror cushion.
USCamera light seal placement guide for this model Yashica film camera here.
Yashica TL Electro-X Seals
USCamera custom light seal kit for the Yashica TL Electro X Series of film cameras. This 6 piece custom kit includes lower/upper door channel seals on the camera body, short lower/upper channel seals starting at back cover hinge end, 1 special cut mirror cushion, and 1 door hinge seal on the camera body.
Old foam removal and replacement information is always available online.
USCamera light seal placement guide for this Yashica film camera.
Removing the backing from the foam can be difficult for some. This video may help.
Reviews
There are no reviews yet.