Light Seal Strips 1.5T – 26 Pieces
$8.25
USCamera TEK-PACK of pre-cut imported black open cell foam strips. These assorted strips have the adhesive applied and are 1.5mm thick X 185 mm long x 26 pieces. Made by USCamera.
- 6 Strips 185mm Long 1.30mm Wide 1.5mm Thick
- 6 Strips 185mm Long 1.40mm Wide 1.5mm Thick
- 6 Strips 185mm Long 1.60mm Wide 1.5mm Thick
- 4 Strips 185mm Long 2.00mm Wide 1.5mm Thick
- 4 Strips 185mm Long 2.25mm Wide 1.5mm Thick
Please note, we can custom cut most any width and up to 400mm in length of the foam material we sell.
In stock
0
People watching this product now!
Description
Light Seal Strips 1.5T – 26 Pieces – 185 Long with Adhesive | 1.3 | 1.4 | 1.6 | 2.0| 2.25 Wide | Open Cell Foam
USCamera | Imported Light Seal Strips | With and Without Adhesive | Vintage Parts | Used Cameras | Flash | Lenses and More
Light Seal Strips 1.5T – 26 Pieces – 185 Long with Adhesive | 1.3 | 1.4 | 1.6 | 2.0| 2.25 Wide | Open Cell Foam
Photo Grade Black Open Cell Foam Light Seals
Before doing anything, I recommend reading about removing and replacing light seals.
USCamera stocks premium light seal foam sheets, also strips and kits with the adhesive applied or without.
We add new parts, light seals and also downloads to our inventory almost every day.
First of all, we import all of our light material which is photographic grade open cell foam.
Light Seal Strips – 26 Pieces 1.5mm Thick – 185 Long with Adhesive
We also make and stock over 100 light seal kits for many popular camera models.
USCamera Online Since 1998
Light Seal Kits | Foam Sheets | Pre-Cut Strips | Genuine Parts | Digital | Flash | Lenses | Vintage Film Cameras
USCamera light seal kits also start with precise measurements taken from the actual make and model of the equipment.
We do not sell kits that supply you with a couple of pre-cut pieces which could be easily cut. Then include sheet material which will require you to learn how to accurately hand cut body and back cover channel seals. These seals can be 1.3mm – 2mm wide and average 165mm long. Believe me, it takes a lot of practice to accurately cut seals like those. The percentage of errors/waste is high and accurate cuts are low.
Light Seal Strips 1.5mm Thick – 220mm Long with Adhesive | Premium Open Cell Foam | Foam Sheet | Premium Open Cell Foam Lasts Years | Also Same High-Quality Original Japanese Foam | USCamera
Also, you may need to learn how to remove the old seals from your camera.
Additionally, you may have to cut a short piece from a body channel seal to clear the counter lever opening.
Some cameras use fabric or leather type pieces of material on the back cover or the body, usually at the latch end. We also try and note that information in the light seal placement guides.
Most of the time you do not want to remove those pieces. Generally, they do not wear out. I have serviced cameras that have seen 1500 rolls plus and they are in good condition.
Furthermore, USCamera placement guides can really help you if all the light seals have been removed before you acquired the equipment. See all available USCamera light seal placement guides.
Light Seal Strips 1.5T – 26 Pieces – 185 Long with Adhesive | 1.3 | 1.4 | 1.6 | 2.0| 2.25 Wide | Open Cell Foam
Stocking cut light seals from 1.3 mm wide to 11 mm wide in a thickness of 1.0, 1.5, 2.0, 3.0 or 4.0 mm with adhesive.
Foam sheets are available 250 long by 100 or 25mm wide.
Lastly, USCamera has real camera techs in-house and we also truly enjoy everything about film cameras. Always available to answer any questions contact us anytime.
USCamera makes many popular film camera light seal kits.
Film cameras are showing some renewed interest, check out what’s new.
Additional information
| Weight | 1 oz |
|---|---|
| Imported Black Open Cell Foam Strips |
Black Open Cell Foam Strips 1.50mm Thick 1.30mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 1.40mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 1.50mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 1.60mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 1.70mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 1.75mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 1.90mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 2.00mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 2.25mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 2.50mm Wide 220mm Long x 24 pieces |
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Olympus OM-10 Light Seals
USCamera light seal kit for the Olympus OM10 film camera. This 7 custom piece seal kit includes lower/upper door channel seals for the camera body, 1 camera body door hinge seal, front mirror cushion, back cover latch plate seal, 1 lower film cassette spring cushion and 1 upper film cassette spring cushion.
Foam remove and replace help is always available, here.
USCamera light seal placement guide for this Olympus film camera here.
Removing the foam from the backing can be difficult for some. This video may help.
Pentax K1000 Light Seals
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock.
Help with removal, and replacement of foam seals is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Light Seal Placement guide for this light seal kit, go here.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Ricoh KR Light Seals
USCamera custom light seal kit for the Ricoh KR10, KR10 Super, KR10X, XR6, XR7, XR10, XRS, and the Sears KS Super, KSX Super film cameras. This 7 piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on the body, 1 back cover latch plate seal and 1 mirror cushion. Light seal placement guide for this USCamera Ricoh kit.
Sears KSX Light Seals
USCamera custom light seal kit for the Ricoh Sears KS, KS Auto, KS1, KS Super, KS Super II, KS2, KS1000, KS500, KSX, and KSX Super and other film cameras. This kit may fit other Sears/Ricoh models but we do not have many other Sears model cameras to check for proper fit. This 7-piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on body, 1 back cover latch plate seal and 1 mirror cushion. Tech Note. If your camera has a film reminder window, this kit does not include the light seal around that window.
The USCamera light seal placement guide for this kit is online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar XC3-XC4 Light Seals
USCamera custom light seal kit for the Vivitar XC-1, XC-2, XC-3, and the XC-4 film cameras. This 6 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals latch end, back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for XC series Vivitar film cameras.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Reviews
There are no reviews yet.