Light Seal Foam Sheet 2mm w/ Adhesive

Light Seal Foam Sheet 2mm w/ Adhesive  | 250mm Long x 100mm Wide and 250mm Long x 25mm Wide | Black Open-Cell Foam | USCamera

USCamera | Imported Light Seal Foam Sheets with Adhesive
Light Seal Foam Sheet 2mm w/ Adhesive | 250mm Long x 100mm Wide and 250mm Long x 25mm Wide | Black Open-Cell Foam | USCamera
Premium Quality Open Cell Foam | Perfect Density for Film Cameras

For help installing new and removing old light seals.  Also, following the link to the short read can really improve the quality of your light seal install.

Photo grade light seal foam sheets.  We sell light seal foam sheets with the adhesive applied and also without. This is the exact same foam we use in our kits.

A in the listing = foam sheet adhesive applied
NA  in the listing = foam sheet no adhesive applied.

Stock # LSM 250Lx100Wx2.0T-A  foam sheet measurements = 250 MM Long 100 MM Wide 2.0 MM Thick  A = with Adhesive

Stock # LSM 250Lx25Wx2.0T-A  foam sheet measurements = 250 MM Long 25 MM Wide 2.0 MM Thick  A = with Adhesive

USCamera Light Seal Foam | Sheets | Seal Kits | Pre-cut Strips | Imported From Japan

Stocking 100 mm and 25mm wide sheets with a thickness of 1.0, 1.5, 2.0, or 3.0mm.

Also, our experience has shown us 1.5 mm thick is the best to use for the door channel seals in most film camera body castings.

Remember USCamera has real camera technicians and we truly enjoy everything about film cameras. Always here to answer any questions, contact us anytime.

Shop all USCamera film camera light seal kits.

USCamera Online Since 1998

Light Seal Foam | Parts | Vintage Film Cameras | Digital Cameras | Part Lists | Service Manuals

Do you want to make your own light seal kit? Maybe you also have a camera accessory that needs a special size of the light seal foam.  We can help with that too.

Many times sheet foam can be the best solution. We have our USCamera sheet foam in 1mm, 1.5mm, 2mm, and 3mm, thicknesses, 100mm or 25mm wide, and 250mm or 200mm long.

In addition, we have many strips of light seal material already cut to width and 220 mm long.

Before installing any new light seals…

The most important and time-consuming work is removing the old seals. Focus on clean, clean, clean. Likewise, clean the old residue from the door channels, and very carefully the mirror cushion area.

Light Seal Foam Sheet 2mm w/ Adhesive | 250mm Long x 100mm Wide and 250mm Long x 25mm Wide | Black Open-Cell Foam | USCamera

Certainly, remove the old door hinge and clean anywhere else you are replacing the seals. The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Lastly, the proper and careful installation will truly give you thousands of light tight exposures.

Film cameras are showing some renewed interest, check out what’s new.