Fujica ST901 Light Seals
$8.50
USCamera custom light seal kit for the Fujica ST901 film cameras. This 10 piece custom USCamera foam kit includes lower/upper back cover channel seals, door hinge seal on the back cover, back cover latch plate seal, lower/upper latch plate seal on the camera body, lower/upper camera body channel seals, a replacement mirror cushion and the back cover film reminder window seal.
TECH NOTE. The channel seals on the camera body are not installed starting at the hinge end of the body, like many cameras. Lens mount facing down. For the ST901, these seals are carefully centered in the straight part of the body channels, before the channel turns downward. When installed properly, there will be little if any that seal material leftover. That is the factory install procedure. Also, the proper seals required there are shorter than you would imagine.
UScamera light seal placement guide for this Fujica film camera go here.
In stock
0
People watching this product now!
Description
Fujica ST901 Light Seals
USCamera | Custom Fujica Light Seals | Fuji Film Cameras
Fujica ST901 Light Seals | USCamera Custom Light Seal Kits | Fujica Film Cameras
35mm Fujica SLR Film Cameras
USCamera has thousands of new and used Fujica film camera parts. Look here
Please Contact us with any questions or requests. New light seals, downloads and also new parts are added almost every day.
Top Quality kits using imported open cell foam.
Maybe you would like to make your own light seal kit? Perhaps you have a special film camera accessory that requires a special size of the light seal material. We can help.
Sometimes sheet foam is the best solution. We have foam sheet material in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm. Available here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. In stock here.
Fujica ST901 Light Seals | Film Camera Repair Kit | Fuji Film Cameras
Fujica 35mm Film Cameras, Fuji Light Seals, Fujica light seal kits
For help installing light seal kits please go here. For that reason, following the link to that short read can improve the quality of your light seal installation.
USCamera light seal kit placement guides can really help you also. Especially if the old light seals have already been removed before you acquired the camera. Go here
In addition, the light seal placement guide for this Fujica film camera. Go here.
Light seal kits for Fujica Fuji Film Cameras here.
First of all, the most important and time-consuming work is removing the old seals. Focus on clean, clean, and clean. Likewise, the old residue from the door channels, mirror cushion area, door hinge area and anywhere else you are replacing the seals, must be completely removed. The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Finally, proper installation will give you thousands of light tight exposures.
Always exciting and film cameras are in the past, for now. However, Fuji is still going strong. See the wonderful world of Fuji. Go here.
USCamera | Genuine Fuji Fujica Film Camera, Flash, Lens Parts | Light Seal Kits, Foam Sheets | Fujica 35mm Film Cameras | Fujica ST901 Light Seals
Fujica ST901 Light Seals | Premium Quality Open Cell Foam Lasts Years. Same High-Quality Japanese Foam As Original | Fujica Film Cameras | USCamera Foam
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Olympus OM-10 Light Seals
USCamera light seal kit for the Olympus OM10 film camera. This 7 custom piece seal kit includes lower/upper door channel seals for the camera body, 1 camera body door hinge seal, front mirror cushion, back cover latch plate seal, 1 lower film cassette spring cushion and 1 upper film cassette spring cushion.
Foam remove and replace help is always available, here.
USCamera light seal placement guide for this Olympus film camera here.
Removing the foam from the backing can be difficult for some. This video may help.
Ricoh KR-5 Light Seals
USCamera custom light seal kit for the Ricoh KR5, KR5 Super film cameras. This custom 5 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
Light seal placement guide for this USCamera Ricoh kit, go here (coming soon)
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar V3000s Light Seals
USCamera 6 piece custom light seal kit for the Vivitar V3000s, and V3800Â film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door latch seal back cover, 1 upper door channel seal back cover and 1 door hinge seal on the back cover.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar XC3-XC4 Light Seals
 USCamera custom light seal kit for the Vivitar XC-1, XC-2, XC-3, and the XC-4 film cameras. This 6 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals latch end, back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for XC series Vivitar film cameras.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica Electro-35 Light Seals
USCamera 6 piece custom light seal kit for the Yashica Electro 35 Series including the G, GS, GT, GSN, and GTN. This seal kit includes 2 door channel seals on the body, back cover door latch seal, 2 short channel seals on back cover latch end and 1 hinge seal on the back cover.
USCamera light seal placement guide for this Yashica film camera, here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FR Light Seals
USCamera custom light seal kit for the Yashica FR FR1 FRII film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
USCamera custom light seal placement guide for this Yashica film camera, here
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Reviews
There are no reviews yet.