Canon F1 New Mirror Cushions
Price range: $7.50 through $49.00
USCamera custom mirror cushions for the F1 New camera bodies. These foam cushions have the adhesive already applied. To install you just peel off the backing and press into place. Note. Which F1 do you have? The F1 New requires a 6 volt PX28 battery for the shutter operate at all speeds, and the meter to operate properly. While the F1 Old cameras are made to use a 1.35 volt PX13 or 625 battery for meter indication only. Use option to choose a quantity mirror cushions needed.
0
People watching this product now!
Description
Canon F1 New Mirror Cushions | Package of 5 or More | 35mm Film Cameras
USCamera | Custom Light Seals Canon
Canon F1 New Mirror Cushions |Â Mirror Cushions | USCamera Foam
New/Used Canon Film Camera Parts
USCamera Free Monthly Download | Every Month | Always Free
Please contact us with any questions you may have. We add new parts, also manuals, and light seals are added almost every day.
See all USCamera Light seal kits for Canon.
Please contact us with any questions or requests.
USCamera Kits Start with Premium Open Cell Foam | Canon F1 New Mirror Cushions
Do you want to make your own light seal kit? Maybe you have an accessory that needs light seal foam. We can help with that also.
Many times sheet foam is best. We have foam in 1mm, 1.5mm, 2mm, 3mm, and 4mm thickness in stock.
We have many foam strips already cut to width and 220 mm long.
USCamera Online Since 1998
Genuine Parts for Cameras | Flash | Lenses | Light Seal Kits | Foam Sheets | Vintage Parts for Film Cameras
USCamera Since 1998 | Service Parts for Cameras, Speedlite, Lenses | Also Light Seals, Foam Sheets | Service Manuals Part Lists | Canon F1 New Mirror Cushions | 35mm SLR Cameras
For help with your light seal kit installation and removal. Also, following the link to a short read can improve the quality of your light seal install.
USCamera light seal kit placement guides can help you if the old light seals have been removed.
Light seal placement guide for the Canon AE-1 film camera.
USCamera also makes light seal kits for over 100 film cameras. See all USCamera light seal kits for Canon cameras.
Canon F1 New Mirror Cushions
Of course, we have photo-grade foam, the same foam used in our light seal kits. Shop all cut strips, foam sheets, and light seal kits in stock.
First of all, the most important work you have to do is to remove the old seals. Focus on clean, clean, clean.
Make sure to remove all traces of the old door channel seals, mirror cushion, also door hinge foam, and anywhere else you are replacing old seals.
The finest adhesive in the world will not adhere to that sticky goo that was once a light seal.
Finally, a proper install will give you thousands of light tight exposures.
Canon F1 New Mirror Cushions | 35mm | USCamera Foam
Same High-Quality Japanese Foam As Original | Canon Film Cameras | USCamera Foam
Lastly, made to inspire, see the new Canon products, look here.
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet QL17-GIII Light Seals
USCamera custom Canon light seal kit fits the New Canonet QL 17, QL 17-L, QL 17 GIII, QL 19 GIII, QL 19N, and the Canonet 28 rangefinder cameras. The kit includes 1 upper channel seal on the camera body, 2 latch plate seals on the back cover, 1 latch channel seal on the back cover, 1 upper and 1 lower seal on the back cover. All seals have adhesive already applied and to install you just peel off the foam from the backing and carefully place it. This Canon kit is currently on sale, buy 2 get 1 free, no limit.
Use option and select one or more kits.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Olympus OMG Light Seals
USCamera custom light seal kit for the Olympus OMG OM20 film cameras. This 7-piece seal kit includes lower/upper channel seals for the camera body, 1 camera body hinge seal, 1 mirror cushion, 1 back cover hinge end upper channel seal, and lower/upper seals just under the film cassette spring (latch end, back cover).
USCamera light seal placement guide for this Olympus film camera here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Ricoh KR-5 Light Seals
USCamera custom light seal kit for the Ricoh KR5, KR5 Super film cameras. This custom 5 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
Light seal placement guide for this USCamera Ricoh kit, go here (coming soon)
Sears KSX Light Seals
USCamera custom light seal kit for the Ricoh Sears KS, KS Auto, KS1, KS Super, KS Super II, KS2, KS1000, KS500, KSX, and KSX Super and other film cameras. This kit may fit other Sears/Ricoh models but we do not have many other Sears model cameras to check for proper fit. This 7-piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on body, 1 back cover latch plate seal and 1 mirror cushion. Tech Note. If your camera has a film reminder window, this kit does not include the light seal around that window.
The USCamera light seal placement guide for this kit is online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-1 Light Seals
USCamera 7 piece custom light seal kit for the Yashica FX-1 and FX-2 film cameras. This kit includes 2 door channel seals for the camera body, 1 camera body hinge seal, 1 latch plate seal on the back cover, 2 small back cover hinge side back cover channel seals and 1 custom cut mirror cushion like the original.
USCamera light seal placement guide for this model Yashica film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Reviews
There are no reviews yet.