Canon CY3-1717 Focusing Screen

$24.37
Genuine Canon focusing screen for the Rebel T5 and EOS 1200D digital cameras. Sold as pictured. No tools are included. This is the exact same focusing screen as installed in your camera when new. Made by Canon Japan.

Chinon CX CX II Light Seal Kit

$9.50
USCamera custom light seal kit fits the Chinon CX, CX II, and GAF L-CS  35mm SLR film cameras. The custom 5-piece kit includes 1 custom mirror cushion, upper/lower channel seals for the camera body, 1 back cover hinge seal, and 1 latch plate seal on the back cover. Premium USCamera foam is Made in Japan. Your will need to use an adhesive delay when installing the latch plate seal. That seal is wide, and needs to fit tight. Since that seal has the adhesive applied, I found it was easiest to lick the adhesive side really well, and then put in place quickly. I would leave the back cover open for a couple hours until that seal dries so it doesn't move when the cover is closed. Also, I would not replace the hinge seal on this camera, unless it is missing of course. It is not made of foam and will last another 40 years if left in place. Help with removal, and replacement of foam seals is always available online. USCamera light seal kit placement guide for this Chinon film camera. Coming Soon! Peeling the foam from the backing can be difficult for some. This video may help

Step Up Ring 46mm to 52mm

$4.80
Premium imported metal step up rings can adapt many useful accessories to fit different applications.  Easily allows you to use your large special effect filters on most any smaller lens filter frame.

Canon X91-1736-220 Film Camera Screws

$2.65
Genuine Canon camera screws for the AE-1, AE-1 Program, Al-1, AT-1, and the AV-1 film cameras. Package of 1 screw sold as pictured. Made by Canon Japan. These screws fit the following locations on A-Series cameras,
  • AE-1 Program - front apron, top cover, bottom cover
  • AE-1 - front apron, top cover, (does not fit the AE-1 bottom cover)
  • AL-1 - front apron, top cover, bottom cover
  • AT-1 - front apron, top cover, (does not fit the AT-1 bottom cover)
  • AV-1 - front apron, top cover, bottom cover

Light Seals Cut 220Lx4.50Wx1.0T-A

$4.68
USCamera imported photo grade open cell light seal foam cut strips.  These strips are 220 mm long x 4.50 mm wide x 1.00mm thick with the adhesive applied. Package of 3 strips.

Nikon 1K105-839 Cover Tape

$3.23
Genuine Nikon replacement back cover rubber tape for the D90 digital camera. Made by Nikon Japan.    

Canon YA2-4170 Front Ring

$12.03
Genuine Canon front ring for the EF 70-200 4.0 L USM lenses. Made by Canon Japan.

Metz SCA 300A Adapter

Original price was: $34.90.Current price is: $22.00.
Genuine Metz SCA 300A adapter for off-camera use of the SCA module flash shoe. SCA Flash shoes are available for many cameras. Brand new display item. Never sold to a consumer. Complete with the factory box. Made by Metz Germany.  

FEATURED PRODUCTS

PRODUCTS

Graflex Century Graphic

Graflex Century Graphic medium format folding film camera. Anniversary edition with original red bellows. Excellent condition.           Grade?                     Warranty?
Select options This product has multiple variants. The options may be chosen on the product page

Canon CF1-5226 Battery Cover

$7.93
Premium USCamera Import battery cover assembly for the black EOS Digital Rebel 300D digital camera. Made by USCamera China.

Canon CA1-6504 Accessory Shoe

$15.63
Genuine Canon accessory shoe for the EOS 1D, 1DS, 1DS MK II, 1D MK IIn, 1N, 1V, 10D, 600, 630, A2, D30, D60, Elan, Elan II, Elan 7, Elan 7 E, Elan 7 N, Elan 7 NE and other EOS cameras and accessories.  This accessory shoe is also used on the Off-Camera Shoe #2. Made by Canon Japan.

Canon CY1-6177USC AW-WP O Ring

$10.83
Premium Quality USCamera replacement "O" Ring for the WPDC1, WPDC6, WPDC16, WPDC35, WPDC38, WPDC600, and the WPDC800 Underwater housings. Made in the USA.

Canonet 19 Light Seals

$7.25

This custom light seal kit fits the older series Canon Canonet series made prior to 1970.  They are generally bigger and heavier rangefinder cameras than the later models.  This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.

  USCamera light seal placement guide for this model Canon film camera here.

Canon C51-8101 Parts List

$8.99
Digital presentation of a genuine Canon Battery Grip BG-E1 parts list and exploded views. Download link and password sent immediately after payment is accepted. 2 download limit for the file(s) purchased never expires.   Make sure your download is delivered smoothly and hassle free. Make a user account when checking out. More information on that here.   8 page PDF 542 KB Canon C51-8101 Parts List | Battery Grip BG-E1

Light Seal Kit Placement Guides

OUR PARTNERS