Pentax MX Mirror-Cushion Set
$4.00
This USCamera 5 piece mirror cushion replacement kit will fit all of the Pentax MX cameras. 2 different kits are included in the cushion set. You may choose the one that suits your needs. Both will fit and perform equally well.
USCamera mirror cushion placement guide for this Pentax MX mirror cushion set, go here.
In stock
0
People watching this product now!
Description
Pentax MX Mirror-Cushion Set
USCamera Custom Pentax Light seals | Vintage Film Cameras
Pentax MX Mirror-Cushion Set | Film Cameras
Genuine Pentax Film Camera Spares
For help installing light seal kits please go here, before doing anything. Following the link to that short read can improve the quality of your light seal install.
Contact us with any questions you may have. New light seals, also downloads, and parts are added almost every day.
Top Quality kits using imported open cell foam
Do you want to make your own light seal kit? Maybe you have a film camera piece that requires a special size of the light seal material. We can help with that also.
Sheet foam can be the best solution in many cases. So we stock sheets in thicknesses of 1mm, 1.5mm, 2mm, 3mm, and 4mm available here.
In addition, we have many strips of light seal material already cut to width and 220 mm long here.
USCamera Since 1998
Custom Light Seal Kits | Service Parts | Part Catalogs | Repair Manual | Vintage Film Camera Spares
USCamera | Also Pentax Camera, Flash, Lens, Parts | Light Seals, Kits, Foam Sheet | Service Part List Downloads
USCamera light seal kit placement guides can help you also. Especially if the old light seals were removed before you acquired the camera, go here
USCamera mirror cushion placement guide for the Pentax MX, go here.
See all USCamera Light seal kits for Pentax
First of all, the most important and time-consuming work is removing the old seals. Focus on clean, clean, clean. Clean the old seals from the door channels, mirror cushion area, door hinge area and any other area you are replacing seals.
The finest adhesive in the world will not adhere to that sticky, gooey foam that was once a quality light seal.
Furthermore, a proper install will give you thousands of light tight exposures.
Pentax MX Mirror-Cushion Set| USCamera Custom Kits
Always New… see Pentax image products.
USCamera Online Since 1998 | Premium Quality Open Cell Foam Lasts Years | Also, Same High-Quality Japanese Foam As Original | Pentax MX Mirror-Cushion Set | USCamera
Pentax MX mirror cushion 5 piece kit includes,
The L/R finder frame pieces are common to both styles of mirror cushion.
left frame – 1 x 1mm
right frame – 1 x 1mm
Style 1 – Installation using 3 foam pieces
long front mirror cushion – 1 x 1mm
plus the 2 common L/R frame pieces
Style 2 – Installation using 4 foam pieces
short L/R mirror cushions – 2 x 2mm
plus the 2 common L/R frame pieces
Always exciting, see what’s new with Pentax imaging products
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon Pellix Light Seals
USCamera custom light seal kit for the Canon Pellix film camera. This light seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal and a replacement focusing screen seal set of 4 pieces. We find it easier to install the seals surrounding the focusing 1 piece at a time. We also include foam replacements for the 4 felt type seals on the back cover. Though those seals may look in poor condition, most are fine. We only recommend replacing them if missing.
USCamera light seal placement guide for this Canon film camera here
Olympus ECR Light Seals
USCamera custom light seal kit for the Olympus 35 ECR rangefinder film cameras. This seal kit includes 2 door channel seals for the camera body, 2 back cover channel seals, and 1 door hinge seal on the camera body.
Light seal installation, and removal help is always available.
Peeling the foam from the backing can be difficult for some. This video may help
USCamera custom light seal placement for this Olympus film camera here
Olympus OMG Light Seals
USCamera custom light seal kit for the Olympus OMG OM20 film cameras. This 7-piece seal kit includes lower/upper channel seals for the camera body, 1 camera body hinge seal, 1 mirror cushion, 1 back cover hinge end upper channel seal, and lower/upper seals just under the film cassette spring (latch end, back cover).
USCamera light seal placement guide for this Olympus film camera here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar XC3-XC4 Light Seals
 USCamera custom light seal kit for the Vivitar XC-1, XC-2, XC-3, and the XC-4 film cameras. This 6 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals latch end, back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for XC series Vivitar film cameras.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-1 Light Seals
USCamera 7 piece custom light seal kit for the Yashica FX-1 and FX-2 film cameras. This kit includes 2 door channel seals for the camera body, 1 camera body hinge seal, 1 latch plate seal on the back cover, 2 small back cover hinge side back cover channel seals and 1 custom cut mirror cushion like the original.
USCamera light seal placement guide for this model Yashica film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica TL Electro-X Seals
USCamera custom light seal kit for the Yashica TL Electro X Series of film cameras. This 6 piece custom kit includes lower/upper door channel seals on the camera body, short lower/upper channel seals starting at back cover hinge end, 1 special cut mirror cushion, and 1 door hinge seal on the camera body.
Old foam removal and replacement information is always available online.
USCamera light seal placement guide for this Yashica film camera.
Removing the backing from the foam can be difficult for some. This video may help.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Reviews
There are no reviews yet.