Pentax MX Mirror-Cushion Set
$4.00
This USCamera 5 piece mirror cushion replacement kit will fit all of the Pentax MX cameras. 2 different kits are included in the cushion set. You may choose the one that suits your needs. Both will fit and perform equally well.
USCamera mirror cushion placement guide for this Pentax MX mirror cushion set, go here.
In stock
0
People watching this product now!
Description
Pentax MX Mirror-Cushion Set
USCamera Custom Pentax Light seals | Vintage Film Cameras
Pentax MX Mirror-Cushion Set | Film Cameras
Genuine Pentax Film Camera Spares
For help installing light seal kits please go here, before doing anything. Following the link to that short read can improve the quality of your light seal install.
Contact us with any questions you may have. New light seals, also downloads, and parts are added almost every day.
Top Quality kits using imported open cell foam
Do you want to make your own light seal kit? Maybe you have a film camera piece that requires a special size of the light seal material. We can help with that also.
Sheet foam can be the best solution in many cases. So we stock sheets in thicknesses of 1mm, 1.5mm, 2mm, 3mm, and 4mm available here.
In addition, we have many strips of light seal material already cut to width and 220 mm long here.
USCamera Since 1998
Custom Light Seal Kits | Service Parts | Part Catalogs | Repair Manual | Vintage Film Camera Spares
USCamera | Also Pentax Camera, Flash, Lens, Parts | Light Seals, Kits, Foam Sheet | Service Part List Downloads
USCamera light seal kit placement guides can help you also. Especially if the old light seals were removed before you acquired the camera, go here
USCamera mirror cushion placement guide for the Pentax MX, go here.
See all USCamera Light seal kits for Pentax
First of all, the most important and time-consuming work is removing the old seals. Focus on clean, clean, clean. Clean the old seals from the door channels, mirror cushion area, door hinge area and any other area you are replacing seals.
The finest adhesive in the world will not adhere to that sticky, gooey foam that was once a quality light seal.
Furthermore, a proper install will give you thousands of light tight exposures.
Pentax MX Mirror-Cushion Set| USCamera Custom Kits
Always New… see Pentax image products.
USCamera Online Since 1998 | Premium Quality Open Cell Foam Lasts Years | Also, Same High-Quality Japanese Foam As Original | Pentax MX Mirror-Cushion Set | USCamera
Pentax MX mirror cushion 5 piece kit includes,
The L/R finder frame pieces are common to both styles of mirror cushion.
left frame – 1 x 1mm
right frame – 1 x 1mm
Style 1 – Installation using 3 foam pieces
long front mirror cushion – 1 x 1mm
plus the 2 common L/R frame pieces
Style 2 – Installation using 4 foam pieces
short L/R mirror cushions – 2 x 2mm
plus the 2 common L/R frame pieces
Always exciting, see what’s new with Pentax imaging products
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Olympus OMG Light Seals
USCamera custom light seal kit for the Olympus OMG OM20 film cameras. This 7-piece seal kit includes lower/upper channel seals for the camera body, 1 camera body hinge seal, 1 mirror cushion, 1 back cover hinge end upper channel seal, and lower/upper seals just under the film cassette spring (latch end, back cover).
USCamera light seal placement guide for this Olympus film camera here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax K1000 Light Seals
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock.
Help with removal, and replacement of foam seals is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Light Seal Placement guide for this light seal kit, go here.
Ricoh KR-5 Light Seals
USCamera custom light seal kit for the Ricoh KR5, KR5 Super film cameras. This custom 5 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
Light seal placement guide for this USCamera Ricoh kit, go here (coming soon)
Sears KSX Light Seals
USCamera custom light seal kit for the Ricoh Sears KS, KS Auto, KS1, KS Super, KS Super II, KS2, KS1000, KS500, KSX, and KSX Super and other film cameras. This kit may fit other Sears/Ricoh models but we do not have many other Sears model cameras to check for proper fit. This 7-piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on body, 1 back cover latch plate seal and 1 mirror cushion. Tech Note. If your camera has a film reminder window, this kit does not include the light seal around that window.
The USCamera light seal placement guide for this kit is online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar XC3-XC4 Light Seals
 USCamera custom light seal kit for the Vivitar XC-1, XC-2, XC-3, and the XC-4 film cameras. This 6 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals latch end, back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for XC series Vivitar film cameras.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Reviews
There are no reviews yet.