Olympus OM-2SP Light Seals
$8.00
USCamera custom light seal kit for the Olympus models OM-2 Spot Program (SP). This custom 7 piece foam seal kit includes 2 door channel seals for the camera body, 1 camera body door hinge seal and a 4 piece mirror cushion set.Â
USCamera light seal placement guide for this Olympus film camera here.
In stock
0
People watching this product now!
Description
Olympus OM-2 SP Light Seals | USCamera Custom Kits
USCamera Custom Olympus Light seals | Vintage Film Cameras
Olympus OM-2SP Light Seals | OM-2 Spot Program Foam Kits
Genuine Olympus Film Camera Service Spares
Display all online Olympus camera parts here.
Please contact us with any questions you may have. New light seal kits, downloads, and parts are added almost every day.
Top Quality kits using imported open cell foam.
Do you want to make your own light seal kit? Maybe you have a film camera accessory that needs a special size of the light seal foam. Likewise, we can help with that.
Sheet foam can be the best solution in many cases. We also have sheets in thicknesses of 1mm, 1.5mm, 2mm, 3mm, and 4mm, in stock here.
In addition, we have many strips of light seal foam cut to width and 220 mm long, start here.
USCamera Since 1998
Olympus Custom Light Seal Kits | Service Parts | Part Catalogs | Repair Manuals | Vintage Film Camera Spares
See all USCamera Light seal kits available for Olympus, start here.
For help installing light seal kits please go here. Following the link to that short read can improve the quality of your light seal install.
USCamera | Also Olympus Camera, Flash, Lens, Parts | Light Seals, Kits, Foam Sheet | Service Part List Downloads
Also, USCamera light seal kit placement guides can really help you when the old light seals may have already been removed, go here.
USCamera light seal placement guide for this Olympus film camera here.
First of all, the most important and time-consuming work is removing the old seals. Focus on clean, clean, clean. Clean the old residue from the door channels, mirror cushion area, door hinge area and anywhere else you are replacing the seals.
The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal.
Furthermore, a proper install will give you thousands of light tight exposures.
USCamera makes light seal kits for over 100 film camera models, start here.
Olympus OM-2SP Light Seals | USCamera Custom Kits
Of course, we have photo quality foam sheet, the same foam used in our light seal kits. You may also see all foam sheets, cut strips, and light seal kits in stock, Start here.
Always new… see what’s up at Olympus now.
USCamera Online Since 1998 | Premium Quality Open Cell Foam Lasts Years | Also, Same High-Quality Japanese Foam As Original | Olympus OM-2SP Light Seals | USCamera
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon EF Light Seals
USCamera custom light seal kit for the Canon EF Auto film cameras. The kit includes 2 door channel seals for the camera body, 1 door hinge seal and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the backing and press into place. Top Quality kit using imported open cell foam Made in Japan.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Pentax Super Program Light Seals
USCamera custom light seal kit for the Pentax Super Program, Super A, Program Plus, Program A film cameras. The body casting for these models is the same. This 5 piece kit includes 2 door channels seals for the camera body, special cut mirror cushion, back cover hinge end top channel seal, and the hinge seal on the camera body. The original hinge seal is made of type of material that does not require replacement. I do not recommend removing the original seal and. In response to many requests from customers who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. All seals have the adhesive installed. Just remove the backing from the foam and install. This kit is custom cut by USCamera and uses adhesive backed black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax light seal go here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Ricoh KR5 Super-II Seals
This custom light seal kit fits the Ricoh KR5 Super II film cameras. The kit includes 2 door channel seals on body, 2 door channel seals on back cover(hinge end), 2 door channel seals on back cover(latch end), 1 hinge seal on camera body and 1 replacement mirror cushion.
Installation help shown below.
Yashica FR Light Seals
USCamera custom light seal kit for the Yashica FR FR1 FRII film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
USCamera custom light seal placement guide for this Yashica film camera, here
Yashica TL Electro-X Seals
USCamera custom light seal kit for the Yashica TL Electro X Series of film cameras. This 6 piece custom kit includes lower/upper door channel seals on the camera body, short lower/upper channel seals starting at back cover hinge end, 1 special cut mirror cushion, and 1 door hinge seal on the camera body.
Old foam removal and replacement information is always available online.
USCamera light seal placement guide for this Yashica film camera.
Removing the backing from the foam can be difficult for some. This video may help.
Reviews
There are no reviews yet.