- Additional information
- Reviews (0)
Olympus ECR Custom Light Seal Kit
USCamera Custom Light seals Olympus Film Cameras
“The most important and time consuming work is removing the old seals. Focus on clean, clean, clean. Clean the old residue from the door channels, mirror cushion area, door hinge area and anywhere else you are replacing the seals. The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Proper installation will give you thousands of light tight exposures.”
See what’s new with Olympus imaging products
USCamera Custom Light Seal Install – Olympus 35 ECR
Again before you do anything, please read general removal and installation instructions on installing light seals here.
Next, take all of the seals out of the kit and lay them out on your work area. This kit includes,
2 x 1mm – channel seals, camera body
1 x 1mm – channel seals, back cover
1 x 1mm – hinge seal, camera body
Hinge Seal, camera body. Install this seal centering it between the top and bottom door channels.
Door channel seals, camera body. Install the upper and lower back cover channel seals starting at the hinge side on the camera body, working from right to left. The upper channel has the counter actuation lever. You will need to install this seal as close to each side of the counter lever opening as possible.
Door channel seals, back cover. Install these back cover channel seals starting at the hinge side on the camera body, working from right to left. Tech Note. Look carefully at how the seals fit by the door latch and try and install them the same way.
Olympus ECR Custom Light Seal Kit.