Hot
Nikon F2 Light Seals
Price range: $8.75 through $12.50
Nikon F3HP Light Seals
$9.00
USCamera custom light seal kit fits the Nikon F3 / F3 HP film cameras. This kit includes 2 door channel seals for the camera body, mirror cushion and the door hinge seal on the back cover. Please note that this Nikon model does not use a foam door hinge light seal. The door hinge seal is made of a felt type material and does not need to be replaced. We have included the hinge seal should that seal be missing or damaged on your camera.
USCamera light seal placement guide for this Nikon, go here
In stock
0
People watching this product now!
Description
Nikon F3HP Light Seals
USCamera | Nikon Film Camera Parts
Nikon F3HP Light Seals | Nikon SLR Film Cameras
Please Contact us for any questions you may have. New light seal kits, parts, and downloads also are added to our online inventory almost every day.
Premium Quality Nikon Foam Light Seals | Kits | Foam Sheet | Pre-Cut Strips | USCamera Foam | Nikon F3HP Light Seals
Do you want to make your own light seal kit? Maybe you have another film camera accessory that requires a special size of the light seal material. We can help with that also.
Sometimes sheet foam can be the best solution. Therefore we have foam in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm available. Look here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. See here.
For help installing light seal kits please go here. Following the link to that short read will help improve the quality of your light seal installation
USCamera Online Since 1998 | Service Manuals | Part Lists | Downloads | Foam | Vintage Nikon Film Camera Parts
Also, USCamera light seal kit placement guides can really help you. Especially if the old light seals have already been removed before you acquired the camera. Go here
USCamera light seal placement guide for this Nikon, go here
USCamera Light seal kits available for Nikon film cameras.
First of all, the most important and time-consuming work is removing the old seals. Focus on clean, clean, clean
Likewise, clean the old residue from the door channels, and very carefully the mirror cushion area. Certainly, you will want to remove the old door hinge and clean anywhere else you are replacing the seals. The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Lastly, the proper and careful installation will truly give you thousands of light tight exposures.
Always exciting, see what’s new with Nikon today. Look here.
Vintage Nikon Film Camera Spares | Also Nikon Flash, Lens Parts | | Service Manuals Parts Lists | Exploded Views | USCamera Downloads | Nikon F3HP Light Seals
Nikon F3HP Light Seals | Premium Quality Open Cell Foam Lasts Years | Same High-Quality Japanese Foam As Original | Nikon Film Cameras | USCamera Foam
Additional information
| Weight | 1 oz |
|---|
Reviews (1)
1 review for Nikon F3HP Light Seals
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Pentax Super Program Light Seals
USCamera custom light seal kit for the Pentax Super Program, Super A, Program Plus, Program A film cameras. The body casting for these models is the same. This 5 piece kit includes 2 door channels seals for the camera body, special cut mirror cushion, back cover hinge end top channel seal, and the hinge seal on the camera body. The original hinge seal is made of type of material that does not require replacement. I do not recommend removing the original seal and. In response to many requests from customers who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. All seals have the adhesive installed. Just remove the backing from the foam and install. This kit is custom cut by USCamera and uses adhesive backed black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax light seal go here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar XC3-XC4 Light Seals
 USCamera custom light seal kit for the Vivitar XC-1, XC-2, XC-3, and the XC-4 film cameras. This 6 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals latch end, back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for XC series Vivitar film cameras.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-D Quartz Light Seals
USCamera 6 piece custom light seal kit for the Yashica FX-D Quartz film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 back cover latch plate seal, and 1 mirror cushion.
USCamera light seal placement guide for this model Yashica film camera here.
Yashica TL Electro-X Seals
USCamera custom light seal kit for the Yashica TL Electro X Series of film cameras. This 6 piece custom kit includes lower/upper door channel seals on the camera body, short lower/upper channel seals starting at back cover hinge end, 1 special cut mirror cushion, and 1 door hinge seal on the camera body.
Old foam removal and replacement information is always available online.
USCamera light seal placement guide for this Yashica film camera.
Removing the backing from the foam can be difficult for some. This video may help.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
estkb_0 –
Everything as described, prompt delivery. Only installed the bigger seals as they were the only ones that needed it, and it was straightforward.