Mamiya ZE Light Seals
$7.50
USCamera 6 piece custom light seal kit fits the Mamiya ZE, ZE-2, ZE-X, and ZM film cameras. This light seal kit includes 2 door channel seals on the camera body, 1 door hinge seal camera body, upper/lower door channels back cover starting at the hinge end, and a mirror cushion.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
USCamera placement guide for this Mamiya light seal.
In stock
0
People watching this product now!
Description
Mamiya ZE Light Seals | ZE-2 ZE-X
USCamera | Mamiya Custom Light Seals | Mamiya 35mm Film Cameras
Mamiya ZE Light Seals | USCamera Foam | ZE ZE2 ZEX
New/Used Mamiya Film Camera Parts
Please Contact us for any questions you may have. Also, new downloads, parts, and light seal kits and parts are added almost every day.
All USCamera Light seal kits available for Mamiya
Please contact us with any questions or requests. Mamiya ZE Light Seals
USCamera Light Seals | Premium Open Cell Foam
Do you want to make your own light seal kit? Maybe you also have a Mamiya accessory that requires a special size of the light seal material. We can help with that too.
Sometimes sheet foam is the best solution. We have our USCamera sheet foam in 1mm, 1.5mm, 2mm, 3mm, and 4mm thickness available. Go here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. Start here. Mamiya ZE Light Seals
For help installing light seal kits, please, Start here. Also, following the link to a short read can improve the quality of your light seal installation.
USCamera light seal kit placement guides can really help you also. Especially if the when old light seals have been removed before you acquired the camera. Start here
USCamera light seal placement guide for this Mamiya RZ67 film back, Go here.
Currently making light seal kits for over 90 popular film cameras. See all USCamera light seal kits available for Mamiya
Mamiya | ZE ZE-2 ZE-X | 35mm Film Cameras | Mamiya ZE Light Seals
First of all, the most important work you have to do is to remove the old seals.
Focus on clean, clean, clean. Also, carefully clean the old residue from the door channels, mirror cushion area, door hinge and anywhere else you are replacing the seals.
Furthermore, the finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Finally, proper installation will give you thousands of light tight exposures.
Film cameras may be in the past, for now, however, Mamiya Leaf is still going strong. Look here.
USCamera | Genuine Mamiya Film Camera + Lens Parts | Light Seals, Foam Sheets | Also Service Manual Downloads | Mamiya ZE Light Seals
Mamiya ZE Light Seals | Premium Quality Open Cell Foam Lasts Years. Also Same High-Quality Japanese Foam As Original | Mamiya Film Cameras | USCamera Foam
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon EF Light Seals
USCamera custom light seal kit for the Canon EF Auto film cameras. The kit includes 2 door channel seals for the camera body, 1 door hinge seal and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the backing and press into place. Top Quality kit using imported open cell foam Made in Japan.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax 67 Seal Kit
USCamera custom light seal kit for the Pentax 67 film cameras. This 8 piece custom seal kit consists of 3 door channel seals on the camera body, 1 back cover hinge seal, 2 back cover door channel seal, 1 camera body door latch seal, and 1 replacement mirror cushion. USCamera light seal placement guide for this Pentax film camera here.
Pentax K1000 Light Seals
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock.
Help with removal, and replacement of foam seals is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Light Seal Placement guide for this light seal kit, go here.
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described. If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit.
USCamera light seal placement guide for the Pentax MX mirror cushion kit.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar V3000s Light Seals
USCamera 6 piece custom light seal kit for the Vivitar V3000s, and V3800Â film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door latch seal back cover, 1 upper door channel seal back cover and 1 door hinge seal on the back cover.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar XC3-XC4 Light Seals
 USCamera custom light seal kit for the Vivitar XC-1, XC-2, XC-3, and the XC-4 film cameras. This 6 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals latch end, back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for XC series Vivitar film cameras.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FR Light Seals
USCamera custom light seal kit for the Yashica FR FR1 FRII film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
USCamera custom light seal placement guide for this Yashica film camera, here
Reviews
There are no reviews yet.