Light Seals Cut 220Lx7.00Wx1.5T-A
$4.54
USCamera imported photo grade open cell light seal foam cut strips. These strips are 220 mm long x 7.00 mm wide x 1.50mm thick with the adhesive applied. Package of 2 strips.
In stock
0
People watching this product now!
Description
Light Seals Cut 220Lx7.00Wx1.5T-A | Premium Open Cell Foam | USCamera
USCamera | Imported Light Seal Strips Cut with Adhesive
Light Seals Cut 220Lx7.00Wx1.5T-A | Premium Open Cell Foam | USCamera
Photographic Grade Foam Light Seals
AÂ Â – in the listing = foam with adhesive applied
NA – in the listing = foam No adhesive applied
Before starting, please read about removing and replacing light seals here.
USCamera Free Monthly Download | Every Month | Always Free | Go here
USCamera stocks light seal foam sheets, also strips and kits with the adhesive applied or without.
We add new parts, also light seals and downloads almost every day.
First of all, we import all of our light seal material which is photo grade polyethylene open-cell foam.
This product is listed as Light Seals Cut 220Lx7.00Wx1.5T-A
We also make and stock over 100 light seal kits for many camera models. See all USCamera kits. Start here.
USCamera Online Since 1998
Light Seal Kits | Foam Sheets | Pre-Strips | Genuine Parts | Digital | Flash | Lenses | Vintage Film Cameras
USCamera light seal kits always start with precise measurements taken from the actual make and model of the equipment.
We do not sell kits that supply you with a couple of pre-cut pieces that could be easily cut. Then supply you with a foam sheet that will require you to learn how to hand cut body and back cover channel seals. These seals average 1.3mm – 2mm wide and average 165mm long. Believe me, it takes a lot of practice to custom cut those foam seals.
Light Seals Cut 220Lx7.00Wx1.5T-A | Also Foam Seal Strips-Bulk Sheets | Premium Open Cell Foam Lasts Years | Same High-Quality Original Japanese Foam | USCamera
Also, you will need to learn how to clean the old seals from your camera. If you need help with that. Start here.
Additionally, you may have to cut a short piece from a body channel seal to clear the counter lever opening.
Some cameras use fabric or leather type pieces on the back cover or the body, usually at the latch end. They are placed there to help prevent body casting finish rub off from the opening and closing of the cover. We also try and note that info in the light seal placement guides. Most of the time you do not want to remove those pieces. For the most part, they do not wear out. I have serviced film cameras that have seen 5000 rolls plus and they are holding up. 5000 rolls = around 20,000 + exposures
Furthermore, USCamera placement guides can really help you if the light seals have already been removed. See all USCamera light seal placement guides. Go here.
Light Seals Cut 220Lx7.00Wx1.5T-A | Premium Open Cell Foam | USCamera
Also stocking pre-cut light seal strip from 1.2 mm wide to 11 mm wide in a thickness of 1.0, 1.5, 2.0, 3.0 or 4.0 mm with adhesive. Start here.
Foam sheets are also stocked in 50 or 100mm wide by 250mm sheets. Go here.
Lastly, USCamera has real camera techs in-house and all of us truly enjoy all about film cameras. Always here to answer any questions. contact us anytime.
USCamera film camera light seal kits. Start here.
Additional information
| Weight | 2 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon Pellix Light Seals
USCamera custom light seal kit for the Canon Pellix film camera. This light seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal and a replacement focusing screen seal set of 4 pieces. We find it easier to install the seals surrounding the focusing 1 piece at a time. We also include foam replacements for the 4 felt type seals on the back cover. Though those seals may look in poor condition, most are fine. We only recommend replacing them if missing.
USCamera light seal placement guide for this Canon film camera here
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described. If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit.
USCamera light seal placement guide for the Pentax MX mirror cushion kit.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Ricoh KR Light Seals
USCamera custom light seal kit for the Ricoh KR10, KR10 Super, KR10X, XR6, XR7, XR10, XRS, and the Sears KS Super, KSX Super film cameras. This 7 piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on the body, 1 back cover latch plate seal and 1 mirror cushion. Light seal placement guide for this USCamera Ricoh kit.
Ricoh KR5 Super-II Seals
This custom light seal kit fits the Ricoh KR5 Super II film cameras. The kit includes 2 door channel seals on body, 2 door channel seals on back cover(hinge end), 2 door channel seals on back cover(latch end), 1 hinge seal on camera body and 1 replacement mirror cushion.
Installation help shown below.
Vivitar V3000s Light Seals
USCamera 6 piece custom light seal kit for the Vivitar V3000s, and V3800Â film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door latch seal back cover, 1 upper door channel seal back cover and 1 door hinge seal on the back cover.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Reviews
There are no reviews yet.