Light Seals Cut 220Lx4.50Wx1.5T-A
$4.68
Made in Japan for USCamera photo grade open cell light seal foam. Strips are 220 mm long x 4.50 mm wide x 1.50mm thick with the adhesive applied and are cut in the USA by USCamera. Package of 3 strips.
In stock
0
People watching this product now!
Description
Light Seals Cut 220Lx4.50Wx1.5T-A | Premium Open Cell Foam | USCamera
USCamera | Imported Light Seal Strips Cut with Adhesive
Light Seals Cut 220Lx4.50Wx1.5T-A | Premium Open Cell Foam | USCamera
Photographic Grade Foam Light Seals
USCamera Free Monthly Download | Every Month | Always Free
AÂ Â – in the listing = foam with adhesive applied
NA – in the listing = foam No adhesive applied
Before doing anything, I recommend reading about removing and replacing light seals.
USCamera stocks premium light seal foam sheets, also strips, and kits with the adhesive applied or without.
We add new parts, light seals, and also downloads to our almost every day.
First of all, we import all of our light material which is photographic grade open cell foam.
This product is listed as Light Seals Cut 220Lx4.50Wx1.5T-A
We also make and stock over 100 light seal kits for many camera models.
USCamera Online Since 1998
Light Seal Kits | Foam Sheets | Pre Cut Strips | Genuine Parts | Digital | Flash | Lenses | Vintage Film Cameras
USCamera light seal kits also start with precise measurements taken from the actual make and model of the equipment.
We do not sell kits that supply you with a couple of pre-cut pieces which would be easily cut. Then supply you with the material which will require you to learn how to accurately hand cut body and back cover channel seals. These seals average 1.3mm – 2mm wide and average 165mm long. Believe me, it takes a lot of practice to accurately cut seals like those.
Light Seals Cut 220Lx4.50Wx1.5T-A | Foam Seal Strips-Bulk Sheets | Premium Open Cell Foam Lasts Years | Same High-Quality Original Japanese Foam | USCamera
Also, you will need to learn how to clean the old seals from your camera.
Additionally, you may have to cut a short piece from a body channel seal to clear the counter lever opening.
Some cameras use fabric or leather-type pieces of material on the back cover or the body, usually at the latch end. We also try and note that info in the light seal placement guides. Most of the time you do not want to remove those pieces. For the most part, they do not wear out. I have serviced cameras that have seen 5000 rolls plus and they are holding up.
Furthermore, USCamera placement guides can really help you if all the light seals have been removed before you acquired the equipment. See all available USCamera light seal placement guides.
Light Seals Cut 220Lx4.50Wx1.5T-A | Premium Open Cell Foam | USCamera
Stocking cut light seals from 1.2 mm wide to 11 mm wide in a thickness of 1.0, 1.5, 2.0, 3.0 or 4.0 mm with adhesive. Start here.
Foam sheets are available 50 or 100mm wide by 250mm long.
Lastly, USCamera has real camera tech in-house and we also truly enjoy everything about film cameras. Always available to answer any questions contact us anytime.
Lastly, always made to inspire…see New film camera products.
Additional information
| Weight | 2 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Olympus OM-10 Light Seals
USCamera light seal kit for the Olympus OM10 film camera. This 7 custom piece seal kit includes lower/upper door channel seals for the camera body, 1 camera body door hinge seal, front mirror cushion, back cover latch plate seal, 1 lower film cassette spring cushion and 1 upper film cassette spring cushion.
Foam remove and replace help is always available, here.
USCamera light seal placement guide for this Olympus film camera here.
Removing the foam from the backing can be difficult for some. This video may help.
Olympus OMG Light Seals
USCamera custom light seal kit for the Olympus OMG OM20 film cameras. This 7-piece seal kit includes lower/upper channel seals for the camera body, 1 camera body hinge seal, 1 mirror cushion, 1 back cover hinge end upper channel seal, and lower/upper seals just under the film cassette spring (latch end, back cover).
USCamera light seal placement guide for this Olympus film camera here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax K1000 Light Seals
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock.
Help with removal, and replacement of foam seals is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Light Seal Placement guide for this light seal kit, go here.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar V3000s Light Seals
USCamera 6 piece custom light seal kit for the Vivitar V3000s, and V3800Â film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door latch seal back cover, 1 upper door channel seal back cover and 1 door hinge seal on the back cover.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Reviews
There are no reviews yet.