Light Seals Cut 220Lx4.00Wx3.0T-A
$4.59
USCamera imported photo grade open cell light seal foam cut strips. These strips are 220 mm long x 4.00 mm wide x 3 mm thick with the adhesive applied. Package of 3 strips.
In stock
0
People watching this product now!
Description
Light Seals Cut 220Lx4.00Wx3.0T-A | Premium Open Cell Foam | USCamera
USCamera | Imported Light Seal Strips Cut with Adhesive
Light Seals Cut 220Lx4.00Wx3.0T-A | Premium Open Cell Foam | USCamera
Photographic Grade Foam Light Seals
AÂ Â – in the listing = foam with adhesive applied
NA – in the listing = foam No adhesive applied
Before doing anything, I recommend reading about removing and replacing light seals here.
USCamera Free Monthly Download | Every Month | Always Free | Go here.
USCamera stocks premium light seal foam sheets, also strips and kits with the adhesive applied or without.
We add new parts, light seals and also downloads to our almost every day.
First of all, we import all of our light material which is photographic grade open cell foam.
This product is listed as Light Seals Cut 220Lx1.75Wx3.0T-A
We also make and stock over 90 light seal kits for many camera models. See all kits, Start here.
USCamera Online Since 1998
Light Seal Kits | Foam Sheets | Pre-Strips | Genuine Parts | Digital | Flash | Lenses | Vintage Film Cameras
USCamera light seal kits also start with precise measurements taken from the actual make and model of the equipment.
We do not sell kits that supply you with a couple of pre-cut pieces which would be easily cut. Then supply you with material which will require you to learn how to accurately hand cut body and back cover channel seals. These seals average 1.3mm – 2mm wide and average 165mm long. Believe me, it takes a lot of practice to accurately cut seals like those.
Light Seals Cut 220Lx4.00Wx3.0T-A | Foam Seal Strips-Bulk Sheets | Premium Open Cell Foam Lasts Years | Same High-Quality Original Japanese Foam | USCamera
Also, you will need to learn how to clean the old seals from your camera. If you need help with that, go here.
Additionally, you may have to cut a short piece from a body channel seal to clear the counter lever opening.
Some cameras use fabric or leather type pieces of material on the back cover or the body, usually at the latch end. We also try and note that info in the light seal placement guides. Most of the time you do not want to remove those pieces. For the most part, they do not wear out. I have serviced cameras that have seen 5000 rolls plus and they are holding up.
Furthermore, USCamera placement guides can really help you if all the light seals have been removed before you acquired the equipment. See all available USCamera light seal placement guides. Go here.
Light Seals Cut 220Lx4.00Wx3.0T-A | Premium Open Cell Foam | USCamera
Stocking cut light seals from 1.2 mm wide to 11 mm wide in a thickness of 1.0, 1.5, 2.0, 3.0 or 4.0 mm with adhesive. Start here.
Foam sheets are available 50 or 100mm wide by 250mm long. Look here
Lastly, USCamera has real camera tech in-house and we also truly enjoy everything about film cameras. Always available to answer any questions contact us anytime.
USCamera popular film camera light seal kits go here
Additional information
| Weight | 2 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon Pellix Light Seals
USCamera custom light seal kit for the Canon Pellix film camera. This light seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal and a replacement focusing screen seal set of 4 pieces. We find it easier to install the seals surrounding the focusing 1 piece at a time. We also include foam replacements for the 4 felt type seals on the back cover. Though those seals may look in poor condition, most are fine. We only recommend replacing them if missing.
USCamera light seal placement guide for this Canon film camera here
Olympus OM-10 Light Seals
USCamera light seal kit for the Olympus OM10 film camera. This 7 custom piece seal kit includes lower/upper door channel seals for the camera body, 1 camera body door hinge seal, front mirror cushion, back cover latch plate seal, 1 lower film cassette spring cushion and 1 upper film cassette spring cushion.
Foam remove and replace help is always available, here.
USCamera light seal placement guide for this Olympus film camera here.
Removing the foam from the backing can be difficult for some. This video may help.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described. If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit.
USCamera light seal placement guide for the Pentax MX mirror cushion kit.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FR Light Seals
USCamera custom light seal kit for the Yashica FR FR1 FRII film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
USCamera custom light seal placement guide for this Yashica film camera, here
Yashica TL Electro-X Seals
USCamera custom light seal kit for the Yashica TL Electro X Series of film cameras. This 6 piece custom kit includes lower/upper door channel seals on the camera body, short lower/upper channel seals starting at back cover hinge end, 1 special cut mirror cushion, and 1 door hinge seal on the camera body.
Old foam removal and replacement information is always available online.
USCamera light seal placement guide for this Yashica film camera.
Removing the backing from the foam can be difficult for some. This video may help.
Reviews
There are no reviews yet.