Light Seals Cut 220Lx1.40Wx1.0T-A

Light Seals Cut 220Lx1.40Wx1.0T-A | Premium Open Cell Foam

USCamera | Imported Light Seal Strips Cut with Adhesive
Light Seals Cut 220Lx1.40Wx1.0T-A | Premium Open Cell Foam
Photographic Grade Foam Light Seals

A    – in the listing = foam with adhesive applied
NA – in the listing = foam No adhesive applied

Before doing anything, I recommend reading about removing and replacing light seals here.

USCamera stocks premium light seal foam sheets, also strips and kits with the adhesive applied or without.

We add new parts, light seals and also downloads to our inventory almost every day.

First of all, we import all of our light material which is photographic grade open cell foam.

This product is listed as Light Seals Cut 220Lx1.40Wx1.0T-A

We also make and stock over 90 light seal kits for many popular camera models. See all kits, Start here.

USCamera Online Since 1998

Light Seal Kits | Foam Sheets | Pre-Strips | Genuine Parts | Digital | Flash | Lenses | Vintage Film Cameras

USCamera light seal kits also start with precise measurements taken from the actual make and model of the equipment.

We do not sell kits that supply you with a couple of pre-cut pieces which would be easily cut. Then supply you with material which will require you to learn how to accurately hand cut body and back cover channel seals.  These seals average 1.4mm – 2mm wide and average 165mm long. Believe me, it takes a lot of practice to accurately cut seals like those.  The percentage of error waste is high and accurate cuts are low.

Light Seals Cut 220Lx1.40Wx1.0T-A | Foam Seal Strips-Bulk Sheets | Premium Open Cell Foam Lasts Years | Also Same High-Quality Original Japanese Foam | USCamera

Also, you will need to learn how to clean the old seals from your camera. Instructions for that, make sure to go here.

Additionally, you may have to cut a short piece from a body channel seal to clear the counter lever opening.

Some cameras use fabric or leather type pieces of material on the back cover or the body, usually at the latch end.  We also try and note that information in the light seal placement guides. Most of the time you do not want to remove those pieces. Generally, they do not wear out. I have serviced cameras that have seen 5000 rolls plus and they are holding up.

Furthermore, USCamera placement guides can really help you if all the light seals have been removed before you acquired the equipment. See all available USCamera light seal placement guides. Go here.

Light Seals Cut 220Lx1.40Wx1.0T-A | Premium Open Cell Foam

Stocking cut light seals from 1.2 mm wide to 11 mm wide in a thickness of 1.0, 1.5, 2.0, 3.0 or 4.0 mm with adhesive.  Start here.

Foam sheets are available 50 or 100mm wide by 250mm long. Look here

Lastly, USCamera has real camera techs in-house and we also truly enjoy everything about film cameras. Always available to answer any questions contact us anytime.

USCamera popular film camera light seal kits go here