Light Seal Strips 1.5T – 26 Pieces
$8.25
USCamera TEK-PACK of pre-cut imported black open cell foam strips. These assorted strips have the adhesive applied and are 1.5mm thick X 185 mm long x 26 pieces. Made by USCamera.
- 6 Strips 185mm Long 1.30mm Wide 1.5mm Thick
- 6 Strips 185mm Long 1.40mm Wide 1.5mm Thick
- 6 Strips 185mm Long 1.60mm Wide 1.5mm Thick
- 4 Strips 185mm Long 2.00mm Wide 1.5mm Thick
- 4 Strips 185mm Long 2.25mm Wide 1.5mm Thick
Please note, we can custom cut most any width and up to 400mm in length of the foam material we sell.
In stock
0
People watching this product now!
Description
Light Seal Strips 1.5T – 26 Pieces – 185 Long with Adhesive | 1.3 | 1.4 | 1.6 | 2.0| 2.25 Wide | Open Cell Foam
USCamera | Imported Light Seal Strips | With and Without Adhesive | Vintage Parts | Used Cameras | Flash | Lenses and More
Light Seal Strips 1.5T – 26 Pieces – 185 Long with Adhesive | 1.3 | 1.4 | 1.6 | 2.0| 2.25 Wide | Open Cell Foam
Photo Grade Black Open Cell Foam Light Seals
Before doing anything, I recommend reading about removing and replacing light seals.
USCamera stocks premium light seal foam sheets, also strips and kits with the adhesive applied or without.
We add new parts, light seals and also downloads to our inventory almost every day.
First of all, we import all of our light material which is photographic grade open cell foam.
Light Seal Strips – 26 Pieces 1.5mm Thick – 185 Long with Adhesive
We also make and stock over 100 light seal kits for many popular camera models.
USCamera Online Since 1998
Light Seal Kits | Foam Sheets | Pre-Cut Strips | Genuine Parts | Digital | Flash | Lenses | Vintage Film Cameras
USCamera light seal kits also start with precise measurements taken from the actual make and model of the equipment.
We do not sell kits that supply you with a couple of pre-cut pieces which could be easily cut. Then include sheet material which will require you to learn how to accurately hand cut body and back cover channel seals. These seals can be 1.3mm – 2mm wide and average 165mm long. Believe me, it takes a lot of practice to accurately cut seals like those. The percentage of errors/waste is high and accurate cuts are low.
Light Seal Strips 1.5mm Thick – 220mm Long with Adhesive | Premium Open Cell Foam | Foam Sheet | Premium Open Cell Foam Lasts Years | Also Same High-Quality Original Japanese Foam | USCamera
Also, you may need to learn how to remove the old seals from your camera.
Additionally, you may have to cut a short piece from a body channel seal to clear the counter lever opening.
Some cameras use fabric or leather type pieces of material on the back cover or the body, usually at the latch end. We also try and note that information in the light seal placement guides.
Most of the time you do not want to remove those pieces. Generally, they do not wear out. I have serviced cameras that have seen 1500 rolls plus and they are in good condition.
Furthermore, USCamera placement guides can really help you if all the light seals have been removed before you acquired the equipment. See all available USCamera light seal placement guides.
Light Seal Strips 1.5T – 26 Pieces – 185 Long with Adhesive | 1.3 | 1.4 | 1.6 | 2.0| 2.25 Wide | Open Cell Foam
Stocking cut light seals from 1.3 mm wide to 11 mm wide in a thickness of 1.0, 1.5, 2.0, 3.0 or 4.0 mm with adhesive.
Foam sheets are available 250 long by 100 or 25mm wide.
Lastly, USCamera has real camera techs in-house and we also truly enjoy everything about film cameras. Always available to answer any questions contact us anytime.
USCamera makes many popular film camera light seal kits.
Film cameras are showing some renewed interest, check out what’s new.
Additional information
| Weight | 1 oz |
|---|---|
| Imported Black Open Cell Foam Strips |
Black Open Cell Foam Strips 1.50mm Thick 1.30mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 1.40mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 1.50mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 1.60mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 1.70mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 1.75mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 1.90mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 2.00mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 2.25mm Wide 220mm Long x 24 pieces ,Black Open Cell Foam Strips 1.50mm Thick 2.50mm Wide 220mm Long x 24 pieces |
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Pentax 67 Seal Kit
USCamera custom light seal kit for the Pentax 67 film cameras. This 8 piece custom seal kit consists of 3 door channel seals on the camera body, 1 back cover hinge seal, 2 back cover door channel seal, 1 camera body door latch seal, and 1 replacement mirror cushion. USCamera light seal placement guide for this Pentax film camera here.
Pentax Super Program Light Seals
USCamera custom light seal kit for the Pentax Super Program, Super A, Program Plus, Program A film cameras. The body casting for these models is the same. This 5 piece kit includes 2 door channels seals for the camera body, special cut mirror cushion, back cover hinge end top channel seal, and the hinge seal on the camera body. The original hinge seal is made of type of material that does not require replacement. I do not recommend removing the original seal and. In response to many requests from customers who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. All seals have the adhesive installed. Just remove the backing from the foam and install. This kit is custom cut by USCamera and uses adhesive backed black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax light seal go here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Ricoh KR-5 Light Seals
USCamera custom light seal kit for the Ricoh KR5, KR5 Super film cameras. This custom 5 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
Light seal placement guide for this USCamera Ricoh kit, go here (coming soon)
Vivitar V3000s Light Seals
USCamera 6 piece custom light seal kit for the Vivitar V3000s, and V3800 film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door latch seal back cover, 1 upper door channel seal back cover and 1 door hinge seal on the back cover.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica Electro-35 Light Seals
USCamera 6 piece custom light seal kit for the Yashica Electro 35 Series including the G, GS, GT, GSN, and GTN. This seal kit includes 2 door channel seals on the body, back cover door latch seal, 2 short channel seals on back cover latch end and 1 hinge seal on the back cover.
USCamera light seal placement guide for this Yashica film camera, here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Reviews
There are no reviews yet.