Light Seal Foam Sheet 2mm w/ Adhesive
Price range: $5.47 through $9.83
USCamera Imported photo grade light seal foam sheets 2.omm thick , black open cell foam with adhesive applied. Made in Japan for USCamera. These sheets are 2mm thick. Use option to select 250mm long x 100mm wide or 250mm long by 25mm wide sheets.
0
People watching this product now!
Description
Light Seal Foam Sheet 2mm w/ Adhesive | 250mm Long x 100mm Wide and 250mm Long x 25mm Wide | Black Open-Cell Foam | USCamera
USCamera | Imported Light Seal Foam Sheets with Adhesive
Light Seal Foam Sheet 2mm w/ Adhesive | 250mm Long x 100mm Wide and 250mm Long x 25mm Wide | Black Open-Cell Foam | USCamera
Premium Quality Open Cell Foam | Perfect Density for Film Cameras
For help installing new and removing old light seals. Also, following the link to the short read can really improve the quality of your light seal install.
Photo grade light seal foam sheets. We sell light seal foam sheets with the adhesive applied and also without. This is the exact same foam we use in our kits.
A in the listing = foam sheet adhesive applied
NAÂ in the listing = foam sheet no adhesive applied.
Stock # LSM 250Lx100Wx2.0T-A foam sheet measurements = 250 MM Long 100 MM Wide 2.0 MM Thick A = with Adhesive
Stock # LSM 250Lx25Wx2.0T-A foam sheet measurements = 250 MM Long 25 MM Wide 2.0 MM Thick A = with Adhesive
USCamera Light Seal Foam | Sheets | Seal Kits | Pre-cut Strips | Imported From Japan
Stocking 100 mm and 25mm wide sheets with a thickness of 1.0, 1.5, 2.0, or 3.0mm.
Also, our experience has shown us 1.5 mm thick is the best to use for the door channel seals in most film camera body castings.
Remember USCamera has real camera technicians and we truly enjoy everything about film cameras. Always here to answer any questions, contact us anytime.
Shop all USCamera film camera light seal kits.
USCamera Online Since 1998
Light Seal Foam | Parts | Vintage Film Cameras | Digital Cameras | Part Lists | Service Manuals
Do you want to make your own light seal kit? Maybe you also have a camera accessory that needs a special size of the light seal foam. We can help with that too.
Many times sheet foam can be the best solution. We have our USCamera sheet foam in 1mm, 1.5mm, 2mm, and 3mm, thicknesses, 100mm or 25mm wide, and 250mm or 200mm long.
In addition, we have many strips of light seal material already cut to width and 220 mm long.
Before installing any new light seals…
The most important and time-consuming work is removing the old seals. Focus on clean, clean, clean. Likewise, clean the old residue from the door channels, and very carefully the mirror cushion area.
Light Seal Foam Sheet 2mm w/ Adhesive | 250mm Long x 100mm Wide and 250mm Long x 25mm Wide | Black Open-Cell Foam | USCamera
Certainly, remove the old door hinge and clean anywhere else you are replacing the seals. The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Lastly, the proper and careful installation will truly give you thousands of light tight exposures.
Film cameras are showing some renewed interest, check out what’s new.
Additional information
| Weight | 2 oz |
|---|---|
| Imported Open Cell Foam Sheet |
Black, Open Cell Foam Sheets 250mm Long 100mm Wide 2.0mm Thick ,Black, Open Cell Foam Sheets 250mm Long 25mm Wide 2.0mm Thick |
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon Pellix Light Seals
USCamera custom light seal kit for the Canon Pellix film camera. This light seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal and a replacement focusing screen seal set of 4 pieces. We find it easier to install the seals surrounding the focusing 1 piece at a time. We also include foam replacements for the 4 felt type seals on the back cover. Though those seals may look in poor condition, most are fine. We only recommend replacing them if missing.
USCamera light seal placement guide for this Canon film camera here
Olympus OMG Light Seals
USCamera custom light seal kit for the Olympus OMG OM20 film cameras. This 7-piece seal kit includes lower/upper channel seals for the camera body, 1 camera body hinge seal, 1 mirror cushion, 1 back cover hinge end upper channel seal, and lower/upper seals just under the film cassette spring (latch end, back cover).
USCamera light seal placement guide for this Olympus film camera here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Yashica FX-1 Light Seals
USCamera 7 piece custom light seal kit for the Yashica FX-1 and FX-2 film cameras. This kit includes 2 door channel seals for the camera body, 1 camera body hinge seal, 1 latch plate seal on the back cover, 2 small back cover hinge side back cover channel seals and 1 custom cut mirror cushion like the original.
USCamera light seal placement guide for this model Yashica film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-D Quartz Light Seals
USCamera 6 piece custom light seal kit for the Yashica FX-D Quartz film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 back cover latch plate seal, and 1 mirror cushion.
USCamera light seal placement guide for this model Yashica film camera here.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Reviews
There are no reviews yet.