Konica FS-1 Light Seal Kit
$12.50
This USCamera custom light seal kit fits the Konica FS-1 35mm film cameras. This 6 piece kit includes lower/upper door channel seals, 1 special cut back cover hinge end seal, back cover latch end seal, and custom cut 3 piece Fresnel frame set. Please note this Konica uses 2 rubber pieces in the upper and lower channels on the back cover approximately 20mm from the hinge end. Those parts do not need to be removed and should be left alone.
USCamera light seal placement guide for this Konica film camera here (coming soon).
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
In stock
0
People watching this product now!
Description
Konica FS-1 Light Seal Kit | 35mm SLR Camera
USCamera | Konica Foam Seal Kits | Genuine Parts | Vintage Film Cameras | Lenses | Service
Konica FS-1 Light Seal Kit | 35mm Konica SLR
Vintage Konica Spare Parts
USCamera Free Monthly Download | Every Month | Always Free
New light seal kits, also downloads, and spare parts are added almost every day.
Please contact us with any questions or requests you may have.
Do you want to make your own light seal kit?
Maybe you have an item that needs a certain size of light seal foam. We can help with that also.
Many times sheet foam can be best. We stock foam sheet in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm.
USCamera Online Since 1998
Genuine Parts | Service Manuals | Part Lists | Light Seal Kits | Foam Sheet | Service Parts | Cameras | Flash |Lenses
We have many strips of light seal foam already cut to width and 220 mm long.
For help with installing and removing light seals. Following the link to that short read will help improve the quality of your install.
USCamera light seal kit placement guides can help you in placing the new seals. More so if the old light seals have been removed. See the Konica FS-1 light seal kit placement guide here (coming soon).
Since 1998 Premium Quality Open Cell Foam | Lasts Years | Same High-Quality Japanese Foam As Original | Konica FS-1 Light Seal Kit | 35mm Konica SLR
USCamera also makes light seal kits for over 100 film cameras. See all USCamera Light seal kits in stock for Konica.
Premium Quality Konica Foam Light Seals | Foam Sheet | Pre-Cut Strips | USCamera Foam
The most important task is removing the old seals. Focus on clean, clean, clean.
Likewise, clean the old foam from the door channels, and very carefully the mirror cushion area.
Also, remove the old door hinge and clean anywhere else you are replacing the seals.
The finest adhesive in the world will not adhere to that sticky, gooey goo that was once a foam light seal.
An accurate and careful install will give you thousands of light tight exposures.
Always exciting, though no longer making cameras, Konica-Minolta remains very successful.
Konica FS-1 Light Seal Kit | 35mm Konica SLR
Lastly, always made to inspire…see New film camera products.
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon Pellix Light Seals
USCamera custom light seal kit for the Canon Pellix film camera. This light seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal and a replacement focusing screen seal set of 4 pieces. We find it easier to install the seals surrounding the focusing 1 piece at a time. We also include foam replacements for the 4 felt type seals on the back cover. Though those seals may look in poor condition, most are fine. We only recommend replacing them if missing.
USCamera light seal placement guide for this Canon film camera here
Olympus OM-10 Light Seals
USCamera light seal kit for the Olympus OM10 film camera. This 7 custom piece seal kit includes lower/upper door channel seals for the camera body, 1 camera body door hinge seal, front mirror cushion, back cover latch plate seal, 1 lower film cassette spring cushion and 1 upper film cassette spring cushion.
Foam remove and replace help is always available, here.
USCamera light seal placement guide for this Olympus film camera here.
Removing the foam from the backing can be difficult for some. This video may help.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Pentax Super Program Light Seals
USCamera custom light seal kit for the Pentax Super Program, Super A, Program Plus, Program A film cameras. The body casting for these models is the same. This 5 piece kit includes 2 door channels seals for the camera body, special cut mirror cushion, back cover hinge end top channel seal, and the hinge seal on the camera body. The original hinge seal is made of type of material that does not require replacement. I do not recommend removing the original seal and. In response to many requests from customers who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. All seals have the adhesive installed. Just remove the backing from the foam and install. This kit is custom cut by USCamera and uses adhesive backed black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax light seal go here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Ricoh KR5 Super-II Seals
This custom light seal kit fits the Ricoh KR5 Super II film cameras. The kit includes 2 door channel seals on body, 2 door channel seals on back cover(hinge end), 2 door channel seals on back cover(latch end), 1 hinge seal on camera body and 1 replacement mirror cushion.
Installation help shown below.
Vivitar XC3-XC4 Light Seals
 USCamera custom light seal kit for the Vivitar XC-1, XC-2, XC-3, and the XC-4 film cameras. This 6 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals latch end, back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for XC series Vivitar film cameras.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FR Light Seals
USCamera custom light seal kit for the Yashica FR FR1 FRII film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
USCamera custom light seal placement guide for this Yashica film camera, here
Reviews
There are no reviews yet.