Konica AutoReflex TC Seals
$8.50
This custom light seal kit fits the Konica AutoReflex T4 and TC film cameras. This kit includes 2 door channel seals, door hinge seal, latch plate seal on back cover, mirror cushion and 3 additional seals used in the viewfinder or focusing screen area.
USCamera light seal placement guide for this Konica film camera here.
In stock
0
People watching this product now!
Description
 Konica AutoReflex TC Seals | 35mm SLR Camera
USCamera | Konica Foam Seal Kits | Genuine Parts | Vintage Film Cameras | Lenses | Service
Konica AutoReflex TC Seals Kit | 35mm Konica SLR
Vintage Konica Spare Parts
USCamera Free Monthly Download | Every Month | Always Free
New light seal kits, also downloads, and spare parts are added almost every day.
Please contact us with any questions or requests you may have.
Do you want to make your own light seal kit?
Maybe you have an item that needs a certain size of light seal foam. We can help with that also.
Many times sheet foam can be best. We stock foam sheet in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm.
USCamera Online Since 1998
Genuine Parts | Service Manuals | Part Lists | Light Seal Kits | Foam Sheet | Service Parts | Cameras | Flash |Lenses
We have many strips of light seal foam already cut to width and 220 mm long.
For help with installing and removing light seals. Following the link to that short read will help improve the quality of your install.
USCamera light seal kit placement guides can help you in placing the new seals. More so if the old light seals have been removed. See the Konica TC light seal placement guide here.
Since 1998 Premium Quality Open Cell Foam | Lasts Years | Same High-Quality Japanese Foam As Original | Konica AutoReflex TC Seals Kit | 35mm Film SLR
USCamera also makes light seal kits for over 100 film cameras. See all USCamera Light seal kits in stock for Konica.
Premium Quality Konica Foam Light Seals | Foam Sheet | Pre-Cut Strips | USCamera Foam
The most important task is removing the old seals. Focus on clean, clean, clean.
Likewise, clean the old foam from the door channels, and very carefully the mirror cushion area.
Also, remove the old door hinge and clean anywhere else you are replacing the seals.
The finest adhesive in the world will not adhere to that sticky, gooey goo that was once a foam light seal.
An accurate and careful installation will give you thousands of light tight exposures.
Always exciting, though no longer making cameras, Konica-Minolta remains very successful.
Konica AutoReflex TC Seals Kit
Lastly, always made to inspire…see New film camera products.
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Ricoh KR Light Seals
USCamera custom light seal kit for the Ricoh KR10, KR10 Super, KR10X, XR6, XR7, XR10, XRS, and the Sears KS Super, KSX Super film cameras. This 7 piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on the body, 1 back cover latch plate seal and 1 mirror cushion. Light seal placement guide for this USCamera Ricoh kit.
Ricoh KR-5 Light Seals
USCamera custom light seal kit for the Ricoh KR5, KR5 Super film cameras. This custom 5 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
Light seal placement guide for this USCamera Ricoh kit, go here (coming soon)
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica TL Electro-X Seals
USCamera custom light seal kit for the Yashica TL Electro X Series of film cameras. This 6 piece custom kit includes lower/upper door channel seals on the camera body, short lower/upper channel seals starting at back cover hinge end, 1 special cut mirror cushion, and 1 door hinge seal on the camera body.
Old foam removal and replacement information is always available online.
USCamera light seal placement guide for this Yashica film camera.
Removing the backing from the foam can be difficult for some. This video may help.
Reviews
There are no reviews yet.