Konica AutoReflex A2 Seals
$8.75
USCamera custom light seal kit fits the Konica AutoReflex A, A1000, A2, A3, T, T2, T3, and the T3n 35mm film cameras. The body casting used for these models is the same. This 5 piece foam seal kit includes lower/upper door channel seals for the camera body, camera body hinge seal, back cover door latch plate seal, and a mirror cushion.
USCamera light seal placement guide for this Konica, go here
In stock
0
People watching this product now!
Description
Konica AutoReflex A2 Seals | A | A1000Â | A2 | A3 | T | T2 | T3 | T3n | 35mm SLR
USCamera | Custom Light Seals | Konica 35mm Film Cameras
Konica AutoReflex A2 Seals | A | A1000Â | A2 | A3 | T | T2 | T3 | T3n
New and used Konica film camera parts | USCamera
See all USCamera Light seal kits for Konica film cameras.
USCamera Free Monthly Download | Every Month | Always Free | Go here
Please contact us with any questions you may have. We add new parts, also manuals, and light seals are added almost every day.
USCamera Kits Start with Premium Open Cell Foam
Do you want to make your own light seal kit? Maybe you have a camera accessory that requires a special size of the light seal material. We can help with that also.
Sometimes sheet foam is best. We have foam in 1mm, 1.5mm, 2mm, 3mm, and 4mm thickness in stock. start here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. Start here.
USCamera Since 1998 | Service Parts for Cameras, Flash, Lenses | Light Seals, Foam Sheets | Service Manuals Part Lists | Konica AutoReflex A2 Seals | A | A1000Â | A2 | A3 | T | T2 | T3 | T3n
For help with your light seal kit install, please start here. Following the link to a short read can improve the quality of your light seal install.
USCamera light seal kit placement guides can help you if the old light seals have already been removed, go here.
The Light seal placement guide for these Konica film cameras is coming soon.
USCamera also makes light seal kits for over 100 film cameras. See all light seal kits in stock.
Konica AutoReflex A2 Seals | A | A1000Â | A2 | A3 | T | T2 | T3 | T3n | 35mm SLR
First of all, the most important work you have to do is to remove the old seals. Focus on clean, clean, clean. Make sure to remove all traces of the old door channel seals, mirror cushion, door hinge, and anywhere else you are replacing old seals. The finest adhesive in the world will not adhere to that sticky goo that was once a light seal. Finally, a proper install will give you thousands of light tight exposures.
USCamera | Genuine Konica Camera, Lens Parts | Also Light Seal Kits, Foam Sheets, Service Parts Downloads + | Konica AutoReflex A2 Seals
Konica AutoReflex A2 Seals | Premium Quality Open Cell Foam Lasts Years. Same High-Quality Japanese Foam As Original | Konica Film Cameras | USCamera Foam
Lastly, though no longer making cameras, Konica-Minolta remains very successful. Explore them here.
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canonet QL17-GIII Light Seals
USCamera custom Canon light seal kit fits the New Canonet QL 17, QL 17-L, QL 17 GIII, QL 19 GIII, QL 19N, and the Canonet 28 rangefinder cameras. The kit includes 1 upper channel seal on the camera body, 2 latch plate seals on the back cover, 1 latch channel seal on the back cover, 1 upper and 1 lower seal on the back cover. All seals have adhesive already applied and to install you just peel off the foam from the backing and carefully place it. This Canon kit is currently on sale, buy 2 get 1 free, no limit.
Use option and select one or more kits.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Olympus OM-10 Light Seals
USCamera light seal kit for the Olympus OM10 film camera. This 7 custom piece seal kit includes lower/upper door channel seals for the camera body, 1 camera body door hinge seal, front mirror cushion, back cover latch plate seal, 1 lower film cassette spring cushion and 1 upper film cassette spring cushion.
Foam remove and replace help is always available, here.
USCamera light seal placement guide for this Olympus film camera here.
Removing the foam from the backing can be difficult for some. This video may help.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Sears KSX Light Seals
USCamera custom light seal kit for the Ricoh Sears KS, KS Auto, KS1, KS Super, KS Super II, KS2, KS1000, KS500, KSX, and KSX Super and other film cameras. This kit may fit other Sears/Ricoh models but we do not have many other Sears model cameras to check for proper fit. This 7-piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on body, 1 back cover latch plate seal and 1 mirror cushion. Tech Note. If your camera has a film reminder window, this kit does not include the light seal around that window.
The USCamera light seal placement guide for this kit is online.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-1 Light Seals
USCamera 7 piece custom light seal kit for the Yashica FX-1 and FX-2 film cameras. This kit includes 2 door channel seals for the camera body, 1 camera body hinge seal, 1 latch plate seal on the back cover, 2 small back cover hinge side back cover channel seals and 1 custom cut mirror cushion like the original.
USCamera light seal placement guide for this model Yashica film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica TL Electro-X Seals
USCamera custom light seal kit for the Yashica TL Electro X Series of film cameras. This 6 piece custom kit includes lower/upper door channel seals on the camera body, short lower/upper channel seals starting at back cover hinge end, 1 special cut mirror cushion, and 1 door hinge seal on the camera body.
Old foam removal and replacement information is always available online.
USCamera light seal placement guide for this Yashica film camera.
Removing the backing from the foam can be difficult for some. This video may help.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Reviews
There are no reviews yet.